Antennas

Featured Products

Other Products

Ultra-Low Loss DPDT Antenna Swap Switch

Skyworks' new ultra-low loss DPDT switch, the SKY13698-694LF, is designed for smartphones, data cards, and MiFi® hotspots. This device delivers the lowest insertion loss, high isolation antenna swap DPDT switch...

LISTED UNDER: Microwave

World's First Commercially Available 5G Phased Array Active Antenna

Anokiwave, Inc. announced the introduction of the first in a family of Phased Array Antenna Innovator’s Kits, the AWMF-0129, driven by the Anokiwave AWMF-0108 28GHz 5G Quad Core IC with...

LISTED UNDER: Microwave

Antenna Aperture Tuners Improve Antenna Efficiency

Skyworks has broadened its antenna tuner portfolio with two new Mobile Industry Processor Interface (MIPI®)-controlled devices that support ultra-low Ron (SKY19247-686LF) and...

LISTED UNDER: Microwave

Antenna Technology for Improved Wi-Fi, GPS and Cellular Performance

Antenna Company announced the availability of new high performance antenna technologies and systems for a wide variety of applications including both indoor and outdoor Wi-Fi, connected home, mobile computing, telematics and IoT applications...

LISTED UNDER: Embedded | Handheld | Microwave

SMD dual antenna includes both inertial navigation and GPS-compassing capabilities

VectorNav Technologies introduced a surface mount version of its market- leading VN-300 Dual Antenna GPS-aided Inertial Navigation System (GPS/INS). The VN-300 surface mount device (SMD) is a miniature MEMS-based inertial navigation module that includes both inertial navigation and GPS- compassing capabilities....

LISTED UNDER: RF & Microwave/Communications | Antennas

Flexible waveguide components suited for satellite applications

ATW Companies Inc. announces that its flexible waveguide and waveguide components, available to the international market, are ideally suited for satellite applications and other airborne and space systems. Products include seamless flexible waveguide, flexible twistable ...

LISTED UNDER: Radar Systems | Microwave | Filters

Antennas designed for consumer devices and Internet of Things

TE Connectivity (Berwyn, PA) introduced two standard antenna extensions — the 5 GHz antenna, which accommodates the new IEEE 802.11ac standard, and the 4G LTE antenna. These new embedded antennas address customers’ increasing needs for ...

LISTED UNDER: RF & Microwave/Communications | Antennas

RFID multiple switch monitor tag is battery free

The X32 from Farsens S.L. (San Sebastián, Spain) is a battery free RFID switch monitor tag capable of transmitting a unique identifier and the status of up to 32 switches to a commercial EPC C1G2 reader without the need of a battery on the sensor tag.

LISTED UNDER: RF & Microwave/Communications | Antennas | RF

Module integrates a BLE 4.1 stack for use with or without a host MCU

Microchip Technology Inc. (Chandler, AZ) announced its first Bluetooth 4.1 Low Energy module.  The RN4020 builds on the Company’s Bluetooth Classic experience and carries both worldwide regulatory certifications and is Bluetooth Special Interest Group (SIG) certified. 

LISTED UNDER: Microwave

802.11b/g/n Wi-Fi System In Package (SiP) module is presented as world’s smallest, most integrated

Econais Inc. (San Jose, CA) announced the EC19W01, positioned as the world’s smallest, smartest and most integrated 802.11b/g/n Wi-Fi System In Package (SiP) module. The EC19W01 offers low power drain and features

LISTED UNDER: Microwave

RF switch attenuators provide up to 6 GHz

Fairview Microwave (Allen, TX) has released a new line of compact hot-switchable variable attenuators. RF attenuators are used to reduce the amplitude of an electronic signature in many common electronic scenarios including lab testing equipment, distributed antenna systems (DAS) and power and signal monitoring systems.

LISTED UNDER: Handheld

Antennas enable cellular coverage inside a building

Pulse Electronics Corporation introduces 3 new low passive inter-modulation (PIM) distributed antenna system (DAS) in-building, ceiling mount omni antennas. With an industry-leading PIM spec of -155 dBc at 2x20 watts, Pulse Electronics' line of PIMinators meets the most demanding requirements of cellular operators....

LISTED UNDER: Handheld

NFC antenna is 28% thinner and meets EMVCo 40mm specification

Pulse Electronics Corporation introduces an ultra-thin near field communications (NFC) ferrite sheet antenna. The antenna is 28% thinner than the previous version and still meets the EMVCo specification of 40mm. It enables NFC connectivity to mobile devices for payment sharing, credential storage and exchange, accessing and controlling data, and wirelessly connecting to tags.

LISTED UNDER: Handheld

Developer kit facilitates fast development of batteryless wireless solutions

EnOcean announced the availability of its new developer kit, EDK 350U, for the North American market. The kit covers the entire product range in 902 MHz, from energy harvesting and wireless modules to ready-made product solutions. The new kit is part of a modular concept with

LISTED UNDER: Microwave

Translucent flex antenna enables innovative industrial designs

Pulse Electronics Corporation introduces the mLUX Translucent Flex Antenna, which enables more innovative, creative, and impressive design effects for mobile devices. The mLUX is an invisible antenna concept. It allows light and color to shine through the translucent device cover, offering multiple options for industrial design.

LISTED UNDER: Handheld

Pages

Featured Companies