The X1GLADIO from Farsens S.L., San Sebastián, Spain, is a battery free RFID switch. These tags are compatible with commercial EPC C1G2 readers and communicate a unique ID and the associated switch status data without the need of battery supply on the sensor tags.
Here at ECN we're always looking for the "next big thing" and this month we're focusing on near-field communications. NFC only seems to be increasing in popularity and usage across the electronics board, but we want to know what's happening in your labs and on your benches.
ADLINK Technology announced the introduction of its PXI-3980, ADLINK’s first quad-core PXI embedded controller featuring the high-performance Intel® Core™ i7-2715QE 2.1 GHz processor, with up to 16 GB of 1333 MHz DDR3 memory, for seamless execution in multitasking environments and reduced test times.
Pulse Electronics Corporation introduces the mLUX Translucent Flex Antenna, which enables more innovative, creative, and impressive design effects for mobile devices. The mLUX is an invisible antenna concept. It allows light and color to shine through the translucent device cover, offering multiple options for industrial design.
Using voice commands to send text messages and emails from behind the wheel, which is marketed as a safer alternative for drivers, actually is more distracting and dangerous than simply talking on a cellphone, a new AAA study found. Automakers have been trying to excite new-car buyers, especially younger ones, with dashboard infotainment systems...
Touchstone Semiconductor announced the TS3300 boost regulator. The TS3300 uses only 3.5µA of supply current, and the TS3300’s efficiency performance is constant over a 100:1 span in output current. No other low power boost converter offers this level of performance.
Harsh environments associated with space applications pose particularly demanding radiation requirements on Radio Frequency (RF) components. The effects of radiation can lead to additional device parameter degradation, performance interruptions or destructive failure modes.
B&B Electronics Manufacturing Company released its iMcV-Giga FiberLinX-III gigabit intelligent Ethernet media converter. This highly anticipated third generation of the company’s successful FiberLinX family is a 10/100/1000Mbps copper to 1000Mbps fiber device, converting existing copper wiring-based networks to fiber optics.
The most recent IDC Predictions 2013: Competing on the 3RD Platform report forecasts the biggest driver of IT growth to once again be mobile devices (smartphones, tablets, e-readers, etc.), generating around 20 percent of all IT purchases....
Forget to turn off the lights before leaving the apartment? No problem. Just raise your hand, finger-swipe the air, and your lights will power down. Want to change the song playing on your music system in the other room? Move your hand to the right and flip through the songs.
Telit Wireless Solutions and Danlaw Incorporated announced that Danlaw’s DL750 includes Telit’s ultra-compact GSM/GPRS cellular module, the GE865-QUAD. The product is a self-contained consumer installable data collection device. Danlaw and Telit who cooperated in a number of products before, are
LORD MicroStrain Sensing Systems introduced Watt-Link, a wireless sensor node positioned to streamline discrete industrial power installations and provide remote energy monitoring and reporting via any web-connected device. Applications include energy management, building automation,
Here’s a rundown of the most read, most popular, most awesome articles on the web. Take a look at what you missed the first time around or check up on an old favorite to see the conversation in the comments. Keep checking out the Lead at www.ecnmag.com....
Linear Technology Corporation announced the LT3055, a high voltage, low noise, low dropout voltage linear regulator offering precision, programmable current limit and diagnostic capability. The device delivers up to 500 mA output current with a 350-mV dropout voltage at full load. It features
NXP Semiconductors N.V. announced the availability of a new family of extreme-broadband amplifiers, applicable for CATV, broadcast TV, satellite systems and general ISM applications – the BGA3012, BGA3015 and BGA3018. Performance characteristics include
Custom MMIC is offering a new device from their growing MMIC library of standard products. The CMD187 is a wideband GaAs MMIC amplifier die for applications from 2 to 20 GHz. This device delivers greater than 22 dB of flat gain with a corresponding output 1 dB compression point of +14 dBm, and a noise figure of 4.5 dB at 20 GHz.
Silicon Labs has expanded its PCI Express (PCIe) timing solution portfolio with new one- and two-output PCIe clock generators that are said to offer the smallest footprint and lowest power in the market. Designed to meet the stringent specifications of the PCIe Generation 1/2/3 standards, the Si52111 and
M/A-COM Technology Solutions extended its strong industry position in diodes with a new family of broadband Shunt PIN Diodes for high-power switching applications. The MACOM Shunt PIN Diode series is designed for customers who need a versatile, low cost, ultra-small Shunt PIN diode element for land mobile radio, wireless infrastructure and test instrument applications.
CETECOM has selected Rohde & Schwarz (R&S) to enhance their over-the-air (OTA) testing capabilities with a new test system that includes LTE multiple-input, multiple-output (MIMO) and 802.11n functionality. The TS8991 test system can perform OTA measurements for LTE MIMO in addition to all cellular 2G, 3G, and 4G technology standards.
NXP Semiconductors N.V. announced the availability of its ultra-wideband Doherty reference design using the BLF884P and BLF884PS – asserted to be the industry’s first wideband Doherty power amplifiers capable of broadband operation (470 MHz to 806 MHz). The new 70-W DVB-T LDMOS designs
The Coilcraft CPS Short Form Catalog is a comprehensive reference to the company’s four lines of RF and power magnetics for critical applications. This 24-page catalog presents detailed specifications on magnetic components for a wide range of applications, including signal generation and processing, RF, power, impedance matching, LED drivers, timing and much more.
Wireless and wired technologies have advanced to the point where automated control systems are routinely networked together. Information can be shared and tasks performed across long distances, via the Internet, linking systems in large industrial spaces, or across remote or rugged areas. Networked control systems (NCS) offer many benefits such as far greater efficiency than manual controls....
Kaltman Creations has introduced a new generation of handheld touch tablet RF Analyzers. The new RF-Vue will be introduced under Kaltman’s Invisible Waves brand at the 2013 InfoComm trade show on June 12-14, in Orlando, FL. The RF-Vue is offered in several versions, but the flag ship model is the RF-Vue T10.
There has been a lot of talk about Google Glass lately, mostly due to the prototype debut, but one interesting aspect of that public viewing is that developers –outside of GoogleLand—can take a crack at coming up with interesting uses for the technology. By allowing new voices into the conversation, the world is seeing even more possibilities for Google Glass.
M/A-COM Technology Solutions introduced a series of GaN in Plastic packaged power transistors for high-performance civilian and military radar and communications systems. The family scales to peak pulse power levels of 100 W, which is asserted to be the