In harsh environments where a sealed enclosure is necessary, baseplate cooling is a simple and inexpensive solution to thermal management of power supplies, says Peter Blyth, XP Power. A new approach using discrete components can make baseplate cooled power supplies smaller, more efficient and more flexible.
WinSystems introduces the PPM-PS397-POE-1, a Power over Ethernet Powered Device (PoE-PD) DC/DC...
Cree continues to showcase the superior performance and reliability of its silicon carbide (SiC...
ITW Linx announces the launch of its SurgeGate™ CAT6-LAN solid state primary surge protector....
The vision of a society in which each inhabitant of the earth manages to consume only 2000 watts has already been around for 15 years. During this time, there has been a steady increase in environmental awareness in the West. Technology has become more efficient and there appears to be very little standing in the way of a sustainable lifestyle.
UltraVolt expanded its line of precision high-voltage amplifiers - the HVA Series - capable of operating in DC, reversible, and amplifier modes. The new line of precision high-voltage amplifiers, the 10 HVA-20 HVA Series, is available with unipolar or bipolar output at 0 to 10 kV, 15 kV and 20 kV. Together with
Murata announced the UDQ series of isolated digitally controlled DC-DC converters developed by Murata Power Solutions. Incorporating a 32-bit ARM7 processor, the 420 Watt regulated UDQ2204/001 model is the first in a series of DC-DC converters from Murata Power Solutions to include a PMBus compatible digital interface.
Vishay Intertechnology added additional 650 V power MOSFETs to its E Series family of devices. These 22 new devices in eight different packages offer an extended on-resistance range from 30 mΩ to 600 mΩ at 10 V and broaden the series' maximum current ratings from 6 A to 105 A.
STMicroelectronics has introduced a generation of energy-efficient power devices that are positioned as reducing the environmental impact of equipment such as telecom or computing systems, solar inverters, industrial automation and automotive applications. STripFET VII DeepGATE MOSFETs are asserted to
KEMET Corporation announced the release of the new Radial Through Hole Ceramic Safety Disc Capacitors. KEMET's 900 Series encapsulated radial through-hole ceramic disc capacitors are specifically designed for interference-suppression AC line filtering applications.
What steps are necessary to keep counterfeit components out of the supply chain? Are more industry standards needed? Stop having unrealistic pricing expectations. Understand and qualify quality vendors of all kinds. Allocations and obsolescence are part of our industry....
NXP Semiconductors N.V. announced the availability of its ultra-wideband Doherty reference design using the BLF884P and BLF884PS – asserted to be the industry’s first wideband Doherty power amplifiers capable of broadband operation (470 MHz to 806 MHz). The new 70-W DVB-T LDMOS designs
B&K Precision expands its DC system power supply offerings with the introduction of the model 9115 multi-range programmable DC power source. The 9115 can deliver up to 1200 W in multiple combinations of voltage up to 80 V and current up to 60 A. With a high density, compact 1U form factor and standard 19" rack-mountable design...
MORNSUN launched its 4200VDC Isolated 20W DC-DC converter URF series which is aimed at applications which require high isolation such as electric power monitoring systems & medical equipment. With high power of up to 20W, the unit satisfies the demand of an extended load in one system with efficiency up to 89%.
The worldwide transition to ever smarter mobile devices, including phones or connected tablets, has obliterated the line that once existed between phones and computing devices. Today’s multitasking devices enable work, finance, entertainment and social interaction on the go like never before.
The Coilcraft CPS Short Form Catalog is a comprehensive reference to the company’s four lines of RF and power magnetics for critical applications. This 24-page catalog presents detailed specifications on magnetic components for a wide range of applications, including signal generation and processing, RF, power, impedance matching, LED drivers, timing and much more.
What’s the key to charging your phone (and other small electronics) in the blink of an eye? Invent a better supercapacitor, according to Eesha Khare, an 18-year-old, from California who was just awarded Intel Foundation Young Scientist Award and $50,000 at the Intel International Science and Engineering Fair for her project...
Announced today by VARTA Microbatteryis the addition of HVCAP35, a Nickel (Ni) based energy storage system to the V-Cap Series. VARTA Microbattery's new Ni based energy storage system is a hybrid technology that combines the high energy density advantage of batteries, with the high power advantage of supercapacitors.
Vincotech, a leading supplier of module-based solutions for power electronics, has introduced a new compact 3x MNPC converter module in a standard flow 1 housing. Designed for 1200 V solar inverters, the flow3xMNPC 1 provides all the components for three-phase applications.
MPD has invented another new CR2032 low profile coin cell battery holder. While other CR2032 holder solutions often rise 8 to 10 mm above the PCB, our new LP2032SM-JJ-GTR rises under 5 mm with an installed CR2032 battery.
Microchip Technology Inc. expanded its 8-bit PIC16F178X enhanced Mid-Range core microcontroller (MCU) family with increased Flash memory densities, intelligent analog and digital peripherals, such as on-chip 12-bit analog-to-digital converters (ADCs), 16-bit
The MPU-400M series, available now from MicroPower Direct, is a family of compact 400W AC/DC power supplies that are certified to EN 60601 3RDedition. These power supplies offer a unique combination of high power, safety features, robust performance and compact construction.
An electrolytic capacitor has two electrodes, one with a dielectric, that relies on electrostatic charge storage. A battery has electrodes that store energy faradaically in electrochemical reactions involving the electrodes and electrolyte. A hybrid capacitor is the combination of two electrodes, one that stores charge electrostatically, and the other storing charge faradaically.
From the small vibrating motors in cell phones to the more complex motors used in household washing machines and air conditioners, motors have become everyday fixtures in the consumer world. The energy consumed by all these motors is significant...
MOSFETs deliver benchmark on-state resistance for improved system efficiency in heavy load applicationsMay 15, 2013 12:31 pm | International Rectifier | Product Releases | Comments
International Rectifier introduced a family of automotive-qualified COOLiRFET MOSFETs delivering benchmark on-state resistance (Rds(on)) for heavy load applications including electric power steering (EPS), braking systems and other heavy loads on internal combustion engine (ICE) and micro hybrid vehicle platforms.
Megger now offer a new series of test leads for use with wind turbines. The unique KC series are long enough to be used for assessing the continuity of lightning protection conductors in wind turbine blades. Developed and designed in conjunction with key wind turbine manufacturers, the KC series is the first commercially available product of its kind to have been specifically designed for wind turbine applications.
Green Watt Power announces the introduction of the GLCD 50 Watt constant current dimmable LED power supplies. The dimming options for the GLCD 50 include 0-10V, PWM and external potentiometer. All models feature a universal 100-277VAC input with nominal output current values of 500mA, 700mA, 1.05A, 1.4A, 1.75A, 2.1A and 2.8A.
Ericsson introduced a new surface-mounted version of its second generation of digital Advanced Bus Converter (ABC) products, called the BMR456-SI. This high-efficiency, digitally controlled DC/DC converter is compliant to full surface-mount manufacturing processes, and
Researchers have created a new tool to detect flaws in lithium-ion batteries as they are being manufactured, a step toward reducing defects and inconsistencies in the thickness of electrodes that affect battery life and reliability. The electrodes, called anodes and cathodes, are the building blocks of powerful battery arrays...