Power
Nickel-based energy storage system provides long life in high temperature
May 17, 2013 4:39 pm | Varta Microbattery | Product Releases | CommentsAnnounced today by VARTA Microbatteryis the addition of HVCAP35, a Nickel (Ni) based energy storage system to the V-Cap Series. VARTA Microbattery's new Ni based energy storage system is a hybrid technology that combines the high energy density advantage of batteries, with the high power advantage of supercapacitors.
Converter module designed for 1200 V solar inverters
May 16, 2013 4:32 pm | Product Releases | CommentsVincotech, a leading supplier of module-based solutions for power electronics, has introduced a new compact 3x MNPC converter module in a standard flow 1 housing. Designed for 1200 V solar inverters, the flow3xMNPC 1 provides all the components for three-phase applications.
Coin cell battery holder rises under 5 mm
May 16, 2013 3:16 pm | Product Releases | CommentsMPD has invented another new CR2032 low profile coin cell battery holder. While other CR2032 holder solutions often rise 8 to 10 mm above the PCB, our new LP2032SM-JJ-GTR rises under 5 mm with an installed CR2032 battery.
MCU family expands to include intelligent analog and core-dependent peripherals
May 16, 2013 3:06 pm | Microchip Technology Inc. | Product Releases | CommentsMicrochip Technology Inc. expanded its 8-bit PIC16F178X enhanced Mid-Range core microcontroller (MCU) family with increased Flash memory densities, intelligent analog and digital peripherals, such as on-chip 12-bit analog-to-digital converters (ADCs), 16-bit
400W AC/DC power supplies certified to EN 60601 3RDedition
May 16, 2013 2:55 pm | MicroPower Direct, LLC | Product Releases | CommentsThe MPU-400M series, available now from MicroPower Direct, is a family of compact 400W AC/DC power supplies that are certified to EN 60601 3RDedition. These power supplies offer a unique combination of high power, safety features, robust performance and compact construction.
Hybrid capacitor characteristics, performance, and applications
May 16, 2013 2:15 pm | by David A. Evans, Evans Capacitor Company, www.evanscap.com | Articles | CommentsAn electrolytic capacitor has two electrodes, one with a dielectric, that relies on electrostatic charge storage. A battery has electrodes that store energy faradaically in electrochemical reactions involving the electrodes and electrolyte. A hybrid capacitor is the combination of two electrodes, one that stores charge electrostatically, and the other storing charge faradaically.
Simplifying BLDC motor control: A tailored solution delivers precision and efficiency
May 16, 2013 2:04 pm | by Wen Chien, Fairchild Semiconductor www.fairchildsemi.com | Articles | CommentsFrom the small vibrating motors in cell phones to the more complex motors used in household washing machines and air conditioners, motors have become everyday fixtures in the consumer world. The energy consumed by all these motors is significant...
MOSFETs deliver benchmark on-state resistance for improved system efficiency in heavy load applications
May 15, 2013 12:31 pm | International Rectifier | Product Releases | CommentsInternational Rectifier introduced a family of automotive-qualified COOLiRFET MOSFETs delivering benchmark on-state resistance (Rds(on)) for heavy load applications including electric power steering (EPS), braking systems and other heavy loads on internal combustion engine (ICE) and micro hybrid vehicle platforms.
Test leads assess lightning protection in wind turbine blades
May 14, 2013 4:03 pm | Product Releases | CommentsMegger now offer a new series of test leads for use with wind turbines. The unique KC series are long enough to be used for assessing the continuity of lightning protection conductors in wind turbine blades. Developed and designed in conjunction with key wind turbine manufacturers, the KC series is the first commercially available product of its kind to have been specifically designed for wind turbine applications.
50 watt dimmable LED power supplies feature a universal 100- 277VAC input
May 14, 2013 2:28 pm | Calex Mfg | Product Releases | CommentsGreen Watt Power announces the introduction of the GLCD 50 Watt constant current dimmable LED power supplies. The dimming options for the GLCD 50 include 0-10V, PWM and external potentiometer. All models feature a universal 100-277VAC input with nominal output current values of 500mA, 700mA, 1.05A, 1.4A, 1.75A, 2.1A and 2.8A.
SMT advanced bus converter promises to save board space
May 13, 2013 2:34 pm | Ericsson Power Modules | Product Releases | CommentsEricsson introduced a new surface-mounted version of its second generation of digital Advanced Bus Converter (ABC) products, called the BMR456-SI. This high-efficiency, digitally controlled DC/DC converter is compliant to full surface-mount manufacturing processes, and
New technique to improve quality control of lithium-ion batteries
May 10, 2013 12:44 pm | by Purdue University | News | CommentsResearchers have created a new tool to detect flaws in lithium-ion batteries as they are being manufactured, a step toward reducing defects and inconsistencies in the thickness of electrodes that affect battery life and reliability. The electrodes, called anodes and cathodes, are the building blocks of powerful battery arrays...
Connector features 16 auxiliary positions & selective mate keys
May 9, 2013 4:23 pm | Anderson Power Products | Product Releases | CommentsAnderson Power Products announces a new addition to their multipole connector selection with the release of the new SB Smart connector. The SB Smart is designed to meet the connection needs for high power storage batteries which are integrated into a larger system or where batteries require monitoring & control circuits.
Benchtop power supply satisfies a wide range of applications between 60V/20A and 20V/50A
May 9, 2013 4:11 pm | Saelig Company, Inc. | Product Releases | CommentsSaelig Company has introduced the QPX1200SP - a 1.2kW DC bench-top power supply featuring PowerFlex regulation, designed to meet the need for flexibility in the choice of voltage and current. It offers voltage and current combinations for a very wide range of applications between 60V/20A and 20V/50A.
Low noise power
May 9, 2013 3:28 pm | by M. Simon, Technical Contributor | Blogs | CommentsI recently designed a low power, low noise, power supply for digital work. The nominal output voltages as designed are +5 volts and +3.3 volts. One hundred and fifty milliamps each. With a lightly regulated five volt supply for powering LED back lights.
Batteries that bend and flex will transform electronics, transportation
May 9, 2013 10:41 am | by EurekAlert! | News | CommentsImagine a TV screen that hangs on the wall like a poster and rolls up like a window shade — or a smartphone that can fold up and fit into a pocket. It may sound like science fiction, but those technological marvels are moving closer to reality, thanks to advances toward development of flexible batteries....
Polypropylene film caps target DC link and high duty-cycle power applications
May 7, 2013 12:27 pm | Illinois Capacitor | Product Releases | CommentsMDCL Series film capacitors from Illinois Capacitor are available in a range of capacitance values from 50 mF to 1,500 mF with high energy density and voltage ratings up to 1,600 WVDC. Packaged in a tubular metal case, this capacitor well suited for energy management applications, where
Power supply, programmable power, high power, 1000V, testing, photovoltaic inverters
May 7, 2013 11:00 am | Ametek Programmable Power | Product Releases | CommentsAMETEK Programmable Power extended its Sorensen SG Series high-power DC power supply line with the introduction of the new SG 1000V, which can supply up to 1,000V DC for applications such as testing photovoltaic (PV) inverters and electric vehicles. The new 1000V DC model of SG Series power supplies
SMT limiter diode targets receiver protection applications
May 6, 2013 12:13 pm | Skyworks Solutions, Inc. | Product Releases | CommentsSkyworks Solutions introduced a surface mount limiter diode for receiver protection applications. The CLA4608-085LF is a low capacitance silicon PIN limiter diode designed for high power applications ranging from 10 MHz to over 6 GHz. The maximum resistance at
Ten-Watt, high Isolation DC/DC converter touts UL 60601 approval
May 6, 2013 12:03 pm | Contech, A Division Of Calex | Product Releases | CommentsConTech announced the “TMR” Series of DC/DC converters, which offer up to 10 W of fully regulated output power in a 2’ x 1’ case with an industry standard footprint. The series offers a 2:1 input range with nominal input voltages of
PFC controller family adds functionality
May 6, 2013 11:28 am | Tdk Corporation Of America | Product Releases | CommentsTDK Corporation announced two new types of the BR7000 Series of EPCOS power factor controllers. The BR7000-T power factor controller offers 15 transistor outputs instead of 15 relay outputs. It is designed for applications that require fast switching operations and enables
3-phase, variable-speed inverter power module enables higher torque systems
May 6, 2013 11:20 am | Fairchild Semiconductor | Product Releases | CommentsFairchild Semiconductor has developed the FTC03V455A1, a 3-Phase, Variable Speed Drive Automotive Power Module. This device, intended for 3-Phase motor control applications under 2kW, allows designers to reduce the overall system cost of higher power applications.
Super-Junction MOSFETs add dedicated control input for increased switching efficiency
May 6, 2013 10:58 am | Stmicroelectronics | Product Releases | CommentsSTMicroelectronics introduced the first MDmesh V Super-Junction MOSFET featuring a new package technology that increases the efficiency of power circuitry in equipment such as white goods, televisions, PCs, telecom, and server switched-mode power supplies. The new TO247-4 4-lead package
Consider IEC61000 EMC performance criteria when selecting your power supply
May 2, 2013 11:30 am | by Lorenzo Cividino, SL Power Electronics, www.slpower.com | Articles | CommentsChoosing the right power supply design is imperative for an overall successful product. With the ongoing goal of increased density, reliability, and efficiencies, power ratings need to be reviewed carefully. Product life, temperature, input voltage, load, and cooling are vital considerations,
ECN's interview with the Wireless Power Consortium
May 1, 2013 4:51 pm | by Chris Warner, Executive Editor | Articles | CommentsThe Qi standard is the only non-proprietary solution for wireless charging available in products today. It works by generating a safe electromagnetic field between a charger and a device through a well-established process called magnetic induction. Qi chargers have a built-in transmitting coil, so any Qi device will work with any Qi charger, now and in the future.
