Anderson Power Products announces a new addition to their multipole connector selection with the release of the new SB Smart connector. The SB Smart is designed to meet the connection needs for high power storage batteries which are integrated into a larger system or where batteries require monitoring & control circuits.
Saelig Company has introduced the QPX1200SP - a 1.2kW DC bench-top power supply featuring PowerFlex regulation, designed to meet the need for flexibility in the choice of voltage and current. It offers voltage and current combinations for a very wide range of applications between 60V/20A and 20V/50A.
I recently designed a low power, low noise, power supply for digital work. The nominal output voltages as designed are +5 volts and +3.3 volts. One hundred and fifty milliamps each. With a lightly regulated five volt supply for powering LED back lights.
Imagine a TV screen that hangs on the wall like a poster and rolls up like a window shade — or a smartphone that can fold up and fit into a pocket. It may sound like science fiction, but those technological marvels are moving closer to reality, thanks to advances toward development of flexible batteries....
MDCL Series film capacitors from Illinois Capacitor are available in a range of capacitance values from 50 mF to 1,500 mF with high energy density and voltage ratings up to 1,600 WVDC. Packaged in a tubular metal case, this capacitor well suited for energy management applications, where
AMETEK Programmable Power extended its Sorensen SG Series high-power DC power supply line with the introduction of the new SG 1000V, which can supply up to 1,000V DC for applications such as testing photovoltaic (PV) inverters and electric vehicles. The new 1000V DC model of SG Series power supplies
Skyworks Solutions introduced a surface mount limiter diode for receiver protection applications. The CLA4608-085LF is a low capacitance silicon PIN limiter diode designed for high power applications ranging from 10 MHz to over 6 GHz. The maximum resistance at
ConTech announced the “TMR” Series of DC/DC converters, which offer up to 10 W of fully regulated output power in a 2’ x 1’ case with an industry standard footprint. The series offers a 2:1 input range with nominal input voltages of
TDK Corporation announced two new types of the BR7000 Series of EPCOS power factor controllers. The BR7000-T power factor controller offers 15 transistor outputs instead of 15 relay outputs. It is designed for applications that require fast switching operations and enables
Fairchild Semiconductor has developed the FTC03V455A1, a 3-Phase, Variable Speed Drive Automotive Power Module. This device, intended for 3-Phase motor control applications under 2kW, allows designers to reduce the overall system cost of higher power applications.
STMicroelectronics introduced the first MDmesh V Super-Junction MOSFET featuring a new package technology that increases the efficiency of power circuitry in equipment such as white goods, televisions, PCs, telecom, and server switched-mode power supplies. The new TO247-4 4-lead package
Choosing the right power supply design is imperative for an overall successful product. With the ongoing goal of increased density, reliability, and efficiencies, power ratings need to be reviewed carefully. Product life, temperature, input voltage, load, and cooling are vital considerations,
The Qi standard is the only non-proprietary solution for wireless charging available in products today. It works by generating a safe electromagnetic field between a charger and a device through a well-established process called magnetic induction. Qi chargers have a built-in transmitting coil, so any Qi device will work with any Qi charger, now and in the future.
Wireless power is slowly evolving to help make charging second-nature to the consumer. In Japan, for instance, several portable devices are available that support wireless charging.As more portable devices that offer wireless charging capabilities enter the market, the need for standards naturally will follow.
B&B Electronics Manufacturing expanded its family of industrial-grade USB 2.0 hubs with the UH104, an affordable, four-port mini USB hub used to connect multiple peripheral devices to a single USB port. Powered exclusively by the host USB port, it provides downstream devices with 100 mA of power and High Speed USB connectivity at 480 Mbps.
Available immediately from MicroPower Direct, the MA600MHI series is a family of compact, 6W DC/DC converters fully approved to both EN 60950 and EN 60601. They are specifically designed to meet the stringent isolation, reinforced insulation and low leakage requirements of medical grade equipment.
The series of constant current (CC) models of the high-voltage output (maximum output voltage up to 280VDC) with IP65/67 design for customers’ choices and with the efficiency up to 91%. This series are built-in two-stage PFC circuit to achieve the EU harmonic interference limited of lighting products requirements....
B&K Precision today announced its new MDL Series, a modular programmable DC electronic load system. The MDL Series comprises six unique modules ranging in power from 200 W to 600 W.
ConTech announced the “TMF” Series of DC/DC converters. The series offers up to 40 W of fully regulated output power with an industry standard 2” x 1” footprint, and a 4:1 input range with nominal input voltages of 24 VDC and 48 VDC. Single outputs are
The new V600ME31-LF operates from 2700 to 5400 MHz with a tuning voltage range of 0-24 Vdc. This octave tuning VCO features a typical phase noise of -107 dBc/Hz @ 100 kHz offset and an average tuning sensitivity of 140 MHz/V.
NIC Components is pleased to announce the addition of UL listed (US and Canada; UL 1449 rev3) radial leaded metal oxide varistors (MOVs) to its circuit protection products offering. The newly released NVR series has large disc MOV construction for fast acting absorption of transient energy (joules) on 50 or 60 Hz power circuits....
BEI Sensors announces expanded input/output electrical options and a new IP69K rating on the highly configurable 9960 series. With the new electrical options, the 9960 can communicate with a wider range of controllers and is now capable of accepting a wide range of input voltages.
Krytar, Inc., announced a new two-way power divider offering desirable performance over the broadband frequency range of 1.0 GHz to 40.0 GHz in a compact package with 14 dB Isolation and ±0.60 dB amplitude tracking. The Model 6010400 two-way divider exhibits
MORNSUN’s brand new WRB_MT-3W series is designed with features of compact SMD package of 19.2*12.9*8.75mm, efficiency up to 83%, low power consumption, short circuit protection and so on.
Applied Power Systems is proud to announce the release of their BAP3012 next generation twelve pulse gate firing board which provides robust and reliable operation of parallel or series connected SCR (Silicon Controlled Rectifier) bridges for high power phase-control and power conversion applications using up to 100mm devices.