ITT Interconnect Solutions has developed a connector that is said to improve signal transmission and reception in wireless handheld devices. The Perfect Wireless Interconnect features
NKK Switches announced the availability of the MB2400 Series of miniature, snap-acting, snap-in mount pushbuttons. With four different bezel styles and seven standard bezel colors to choose from, design engineers can
Analog Devices, Inc. announced today the availability of new RF prescaler circuits for a variety of applications, including point-to-point radios, VSATs (very small aperture terminals) and microwave communication systems. A prescaler is a circuit that generates an output signal related to an input signal by a fractional scale factor.
IMI Sensors – a division of PCB Piezotronics, Inc., announces the release of their model 682A09 ICP In-Line 4-20 mA Vibration Transmitter. Another IMI Sensors industry-first, the model 682A09 installs in line with any industrial accelerometer and converts the vibration signal to a 4-20 mA velocity output...
Maxim Integrated Products introduces the MAX4986, a 2:1/1:2 active multiplexer designed to switch and redrive SAS/SATA signals from one source to one of two destinations. This device integrates four programmable signal-amplitude buffers to protect against unwanted noise at the output.
Master Bond EP17HT-3 one part epoxy sets up in 20 to 30 seconds and snap cures in two to three minutes at 250°F-300ºF. As a one part system, no mixing is required and the epoxy can be cured in sections up to 1/4" thick. Its working life is indefinite because
OKW has developed specific desk/charging stations for its ‘SMART-CASE’ enclosures, which fit the cases exactly, and have a common design theme. The desk stations are
WinSystems introduced the PXM-MiniPCIe, a SUMIT-ISM module that supports PCI Express MiniCards and two expansion USB connectors. It provides support for 802.11 a/g wireless, WLAN, and other high-performance communication functions that have been developed for
Maxim Integrated Products introduces the MAX16072-MAX16074 microprocessor supervisory circuits in a 1mm x 1mm chip-scale package. These low-power devices provide excellent circuit reliability and low cost by eliminating the need for multiple external resistors and adjustments normally required when monitoring nominal system voltages from 1.8V to 3.6V.
All Sensors Corporation introduced a low pressure sensor die for high volume applications requiring pressure measurement to as low as a quarter inch of water full scale. The MEMS Piezoresistive Low Pressure Sensing Die uses
Nuvoton Technology Corp. expanded its next-generation Pro-X (PROgrammable Extended CODEC/SLCC) Series devices with the introduction of the N681622 Subscriber Line Control Circuit (SLCC). Supporting one Foreign eXchange Station (FXS) ports, the N681522 operates
Texas Instruments launched the Stellaris FPGA Expansion Board for the DK-LM3S9B96 development kit. The new board enables developers to evaluate the high bandwidth machine-to-machine (M2M) parallel interface capability of Stellaris MCU’s flexible External Peripheral Interface (EPI). With data widths of
Atego released the Aonix PERC Ultra SMP 5.4 with support for concurrent multi-processor garbage collection (GC) technology. Aonix PERC Ultra SMP addresses the need for multiprocessor and multicore solutions in complex mission-critical embedded and real-time Java applications.
Texas Instruments Incorporated introduced audio codecs and digital-to-analog converters (DACs) for eBooks, mobile Internet devices and portable navigation devices. The highly integrated codecs (TLV320AIC3100, TLV320AIC3110, TLV320AIC3111, TLV320AIC3120) and DACs (TLV320DAC3101, TLV320DAC3100, TLV320DAC3120) reduce component count and system cost...
ACCES I/O Products’Model PICO-II8IDO4A I/O Module is designed for expansion on Pico-ITXe single board computers. The product features eight individually optically isolated inputs, four fully protected solid state FET outputs capable of switching up to 3 A each, and two 16-bit analog inputs. The circuit isolation makes
Crystek has introduced the CCK40 Series Cable Assembly, a new addition to their line of Low-Loss RF coaxial cable assemblies. Designed to operate up to 40GHz, the CCK40 features rugged stainless-steel solder-clamp construction and heavy duty strain reliefs.
Electronics components distributor Digi-Key Corporation, recognized by design engineers as having the industry's broadest selection of electronic components available for immediate shipment, today announced it has stock on Torex's Series XC9235 and XC9236 step-down DC/DC converters.
Dave Jones of the EEVblog destroys some multimeters and shoots some metal with his friend Doug's high energy 4-KV capacitor discharge unit.
Maxim Integrated Products introduces the MAXQ622, a high-performance, 16-bit RISC microcontroller with an integrated USB transceiver. Designed for low-power applications, this microcontroller operates from either an external supply (1.7V to 3.6V) or directly from USB power.
The new report “Batteries, Supercapacitors, Alternative Storage for Portable Devices 2009-2019” is directed towards those developing, marketing and using small electronic and electrical devices, particularly those that are self-sufficient.
Energy harvesting is the process of capturing and accumulating byproduct energy as the energy becomes available, storing the energy for a period of time and conditioning it into a form that can be used later – such as operating a microprocessor with in its limits.
The electronics industry is enjoying what appears to be a generally strong recovery from the brutal business conditions with which we were confronted in 2009. It is interesting to note that although the economic meltdown traumatized almost all sectors of our industry and caused a sharp drop in sales, several basic industry trends continued unabated.
Lasers have been described as the “holy grail” of weapons—who wouldn't want to be like Luke Skywalker? But while researchers have pondered everything from “pain rays” to the “Zeus” anti-IED system, the folks over at LaserMotive are pushing something else entirely—power beaming for UAVs.
A new device from the 3M Electronic Solutions Division provides reliable retention of CompactFlash Type I (CF I) and Type II (CF II) removable memory cards mated with 3M CF II card headers, helping to
WinSystems’ PPC3-G-6.5 is a 6.5-inch open frame, color flat panel PC based upon a PC-104-Plus single board computer (SBC) that operates from -20° to +70°C. The ready-to-mount flat panel display subsystem also includes a resistive touch screen integrated into a chassis approximately 2 inches thick. The open frame chassis (without a front bezel) permits