Industrial
Nickel-based energy storage system provides long life in high temperature
May 17, 2013 4:39 pm | Varta Microbattery | Product Releases | CommentsAnnounced today by VARTA Microbatteryis the addition of HVCAP35, a Nickel (Ni) based energy storage system to the V-Cap Series. VARTA Microbattery's new Ni based energy storage system is a hybrid technology that combines the high energy density advantage of batteries, with the high power advantage of supercapacitors.
Module designed for high-speed data aquisition, generation
May 17, 2013 2:35 pm | Product Releases | CommentsTEWS TECHNOLOGIES announced the introduction of the TPMC685, a standard single-width 32 bit PMC module offering up to 128 bit of TTL I/O arranged in 16 x 8 bit ports. Designed for high-speed data acquisition and generation, the TPMC685 is ideal for applications in process control, simulation, test, transportation, and COTS.
MCU family expands to include intelligent analog and core-dependent peripherals
May 16, 2013 3:06 pm | Microchip Technology Inc. | Product Releases | CommentsMicrochip Technology Inc. expanded its 8-bit PIC16F178X enhanced Mid-Range core microcontroller (MCU) family with increased Flash memory densities, intelligent analog and digital peripherals, such as on-chip 12-bit analog-to-digital converters (ADCs), 16-bit
Dealing with counterfeits in the market
May 16, 2013 2:53 pm | by George Karalias, Director of Marketing & Communications, Rochester Electronics | Blogs | CommentsCounterfeiters are adaptable and constantly incorporating solutions that can void the latest countermeasures adopted by the electronics manufacturers and their supply chain. In some cases, the counterfeits are very hard to differentiate from the original component.
What improvements would you like to see from distributors in the next 12 months?
May 16, 2013 2:29 pm | Articles | CommentsWe asked our industry experts and ECN readers to weigh in on our distributors question: What improvements would you like to see from distributors in the next 12 months? Here is what they had to say about the current state of the industry and hot it needs to be improved...
Precision Resistors: From the drawing board to reality
May 16, 2013 2:18 pm | by Yuval Hernik, Director Application Engineering, Vishay Precision Group (VPG), www.vishaypg.com | Articles | CommentsCommercial and military aircraft manufacturers are promoting the replacement of older hydraulic and pneumatic control systems by lighter and more efficient, electrically-driven systems through a trend known as MEA, or More Electric Aircraft.
Hybrid capacitor characteristics, performance, and applications
May 16, 2013 2:15 pm | by David A. Evans, Evans Capacitor Company, www.evanscap.com | Articles | CommentsAn electrolytic capacitor has two electrodes, one with a dielectric, that relies on electrostatic charge storage. A battery has electrodes that store energy faradaically in electrochemical reactions involving the electrodes and electrolyte. A hybrid capacitor is the combination of two electrodes, one that stores charge electrostatically, and the other storing charge faradaically.
Smart electronics reduce energy consumption and improve performance of piezoelectric ultrasonic motors
May 16, 2013 2:10 pm | by David Henderson, co-CEO, New Scale Technologies, Inc., www.newscaletech.com | Articles | CommentsPiezoelectric ultrasonic motors (piezo motors) are a distinct class of rotary and linear actuators requiring unique driving circuits to achieve practical, reliable, precise and efficient operation. A piezo motor uses the ultrasonic vibrations (greater than 20 kHz) of a “stator” structure that is frictionally coupled to a moving slide or rotating shaft. Piezo motors with operating frequencies from 40 to 700 kHz are commercially available.
Simplifying BLDC motor control: A tailored solution delivers precision and efficiency
May 16, 2013 2:04 pm | by Wen Chien, Fairchild Semiconductor www.fairchildsemi.com | Articles | CommentsFrom the small vibrating motors in cell phones to the more complex motors used in household washing machines and air conditioners, motors have become everyday fixtures in the consumer world. The energy consumed by all these motors is significant...
IDC connectors intended for harsh commercial, industrial, and energy applications
May 16, 2013 12:54 pm | Avx Corporation | Product Releases | CommentsAVX Corporation has introduced the latest iteration of its wire-to-board (WTB) insulation displacement contact (IDC) technology. Designed to provide a gas-tight, plated through-hole WTB termination, the new 9177-600 Series is compatible with the rugged power boards used to handle larger wire gauges and more amps per contact....
Waterproof electronic enclosure family adds four new sizes
May 15, 2013 4:05 pm | Polycase | Product Releases | CommentsPolycase’s NEMA 4X rated WA, WC and WP Series of waterproof electronic enclosures has expanded to include four new enclosure sizes. Ranging from 2.28” x 2.52” to 14.12” x 7.84”, the plastic enclosures now host 17 different size options. The WA, WC, and WP Series are UL listed to UL508-4X and meet
Intelligent sensor hub integrates programmability, precision in a single package
May 15, 2013 3:40 pm | Freescale Semiconductor | Product Releases | CommentsFreescale Semiconductor is introducing a new Xtrinsic intelligent sensor hub that serves as an advanced sensor fusion platform. The Xtrinsic FXLC95000CL sensor hub integrates an on-board accelerometer with capability to manage multiple external sensors. The solution provides
Controller designed for aerospace, industrial, and laboratory applications
May 14, 2013 10:44 am | Highland Technology | Product Releases | CommentsHighland Technology announces the release of the V120 VME PCI Express Crate Controller for aerospace, industrial, and laboratory application. The V120 is a VME bus master crate controller, usable as a crate slot 0 arbiter or as a secondary controller. Each PCI Express cable driver board, in a PC backplane, can drive one or two V120s over standard, flexible PCI Express cable assemblies....
Universal, digital sensor output driver includes 3.3-V sensor supply
May 13, 2013 3:22 pm | Product Releases | CommentsThe icHaus universal digital output driver iC-DX3/DXC3 enables compact sensors to be equipped with NPN, PNP, push-pull, and IO link-compatible output driver options. From an input voltage of 8 V to 30 V an integrated linear regulator provides the sensor electronics with a stable +3.3 V voltage and 10 mA
Encoders and inclinometers have J1939 interface
May 10, 2013 10:52 am | Fraba / Posital | Product Releases | CommentsPOSITAL announced its inclinometers and absolute rotary encoders are available with J1939 communications interfaces. (The J1939 protocol was developed by the Society of Automotive Engineers for use in heavy vehicles such as trucks, buses, fire trucks and construction machinery. The protocol
Mid-power LEDs achieve up to 140 lm/W efficacy
May 9, 2013 11:51 am | Philips Lumileds | Product Releases | CommentsPhilips Lumileds introduced the LUXEON 3535 2D, which combines two LED chips in a package to enable reduction in LED count and cost of designing retrofit lamps, consumer downlights and diffuse industrial lamps. Its efficacy of 140 lm/W is achieved for cool white light at 4000K and minimum 80 CRI. The new
Illuminated pushbutton switches offer RGB color options
May 8, 2013 11:51 am | E-Switch | Product Releases | CommentsE-Switch announced its LP6 Series LED illuminated pushbutton switch includes a color option. The switch is available with either SPST or DPST circuit options, and it is a momentary switch. It offers a 15-mm square sculptured cap with LED color options that now include
Polypropylene film caps target DC link and high duty-cycle power applications
May 7, 2013 12:27 pm | Illinois Capacitor | Product Releases | CommentsMDCL Series film capacitors from Illinois Capacitor are available in a range of capacitance values from 50 mF to 1,500 mF with high energy density and voltage ratings up to 1,600 WVDC. Packaged in a tubular metal case, this capacitor well suited for energy management applications, where
Non-magnetic inductor said to be world’s smallest
May 7, 2013 10:11 am | Gowanda | Product Releases | CommentsGowanda Electronics introduced what is asserted to be the world’s smallest non-magnetic molded RF inductor series, SMG1812. The overall size of the new SMG1812 is more than 40 percent smaller than Gowanda’s SMG3013 Series. The SMG1812 was designed specifically for
PFC controller family adds functionality
May 6, 2013 11:28 am | Tdk Corporation Of America | Product Releases | CommentsTDK Corporation announced two new types of the BR7000 Series of EPCOS power factor controllers. The BR7000-T power factor controller offers 15 transistor outputs instead of 15 relay outputs. It is designed for applications that require fast switching operations and enables
'Going negative' pays for nanotubes
May 3, 2013 2:15 pm | by Eurekalert! | News | CommentsA Rice University laboratory's cagey strategy turns negatively charged carbon nanotubes into liquid crystals that could enhance the creation of fibers and films. The latest step toward making macro materials out of microscopic nanotubes depends on cage-like crown ethers that capture potassium cations.
Ultrasonic sensor equipped with LED status indicators, push-button teach feature
May 3, 2013 12:20 pm | Automation Direct | Product Releases | CommentsAutomationDirect’s ultrasonic sensor offering now includes additional 18mm and 30mm round plastic DC models available with discrete or analog outputs. The sensors are equipped with LED status indicators and a push-button teach feature for configuration of normally-open
On-site asbestos detector offers promise of better workplace safety
May 2, 2013 2:27 pm | by Eurekalert! | News | CommentsAsbestos was once called a miracle material because of its toughness and fire-resistant properties. It was used as insulation, incorporated into cement and even woven into firemen's protective clothing. Over time, however, scientists pinned the cause of lung cancers such as mesothelioma on asbestos fiber inhalation.
Light curing adhesives speed mass production of microelectronics
May 2, 2013 9:14 am | Product Releases | CommentsDELO Industrial Adhesives’ new light curing DELO-KATIOBOND product lineup has been engineered for fast seal-bonding functions in the production of microelectronics including micro switches widely used in the automobile industry. Curing to initial strength in just seconds with
Rugged four-port mini USB hub from B&B Electronics mounts anywhere
May 1, 2013 4:10 pm | B & B Electronics | Product Releases | CommentsB&B Electronics Manufacturing expanded its family of industrial-grade USB 2.0 hubs with the UH104, an affordable, four-port mini USB hub used to connect multiple peripheral devices to a single USB port. Powered exclusively by the host USB port, it provides downstream devices with 100 mA of power and High Speed USB connectivity at 480 Mbps.
