Pepperl+Fuchs has added four new power supplies to the company’s family of K- and H-System intrinsic safety solutions. Single-channel KCD2-STC-Ex.1ES and KFD2-STC4-Ex1.ES transmitter power supplies are assembled to the 35-mm DIN mounting rail with
The MESA 7I69 is a remote 48 point TTL I/O card designed for fast real time PC based control systems. It communicates with the host with a robust RS-422 link with up to 100 ft link length. Standard CAT5 cables are used for wiring convenience. The card is
The new AEGIS Shaft Voltage Test Kit is said to make it easier than ever to measure and document damaging VFD-induced voltages while there is still time to head off bearing damage and equipment downtime. Because the kit is
LCR Electronics now offers the 096C series filters for high current three-phase applications.
CEITEC, a Brazilian company that develops and produces ASICs, announced that it has reached volume production for the first semiconductor device designed in-house.
Power Sources Unlimited announces the Traco Power TEP 150WI series with input filter module.
IDS, a global leader in machine vision technology, has unveiled the UI-2280SE, an all-round camera with USB 2.0 interface and Sony ICX655 CCD sensor providing a 5-Megapixel resolution (2448x2050 pixels).
Binder-USA announced new receptacles with adjustable angular positions as part of the Series 713, 763, 715 and 766 automation product ranges. The panel-mounted receptacles can be rotated during installation to allow a right-angle cordset to connect in a desired angular position. These M12 A- and B-coded connectors are
Master Distributors announces that it carries a broad selection of TE’s Corcom standard power entry modules and power line filters.
International Rectifier introduced the IRS2526DS ‘Mini8’ compact fluorescent lamp (CFL) ballast control IC that offers full programmability, and a high degree of accuracy and control for all lamp types.
RFMD’s new RF3826 is a wideband Power Amplifier designed for continuous wave and pulsed applications such as wireless infrastructure, RADAR, two-way radios, and general purpose amplification.
Fluke Corporation introduced the Fluke 430 Series II three-phase power quality analyzers, which are said to be the first tools to use a patented algorithm to measure energy waste and quantify its cost. The series helps facilities reduce electrical power consumption and improve
Novatech Instruments, Inc. introduced Model 425A, a Precision 350 MHz DDS Signal Generator packaged in a small shielded table top case. The device generates sine wave, LVDS, and LVCMOS output signals simultaneously. The generated sine wave output
Keystone Electronics Corp. offers wide selection of surface mount, automotive blade fuse clips engineered to secure fuses in place even after multiple insertions. Suitable for high-density applications, these new, compact, low profile clips are
Yokogawa Electric Corporation’s DTSX200 Distributed Temperature Sensor (DTS) was released to the global market. The unit is used to monitor temperature and flow in oil/gas upstream unconventional and conventional in-well applications
Supertex, Inc. introduced HV9861A, an open loop, average current mode control, LED driver integrated circuit (IC) designed to drive LEDs using a buck topology. It is suited for a variety of solid-state lighting applications, including
Microsemi Corporation unveiled a new LED driver designed for North American street light installations. The efficient LXMG221D-0700040-D2F LED driver eliminates bulky step-down transformers typically used in street light fixtures in
Mitsubishi Electric is introducing a 5.0” WVGA color TFT-LCD module for industrial use. The product, AA050MG01, features a high brightness of 800 cd/m2. The improved backlight structure reduces the thickness of the module to
Designing and implementing sensor interface designs for nonlinear, temperature-dependent transducers presents some difficult challenges. The advent of dedicated and powerful Sensor Signal Conditioning (SSC) ICs has made the job easier, but choosing the right IC for a particular sensor and application is critical for
Galil Motion Control announced the DMC-300xx, the latest device in their single-axis Ethernet Pocket Motion Controller Series. It combines a high performance motion controller and a 800-W sine drive in a 3.9" x 5.0" x 1.5" package. The DMC-300xx is also available as a controller-only model which can
Cree’s new XLamp MT-G LEDs are asserted to deliver high brightness levels, unparalleled color quality and proven lighting-class reliability. The new MT-G LED can deliver up to
MicroPower Direct’s MPO-200S Series of 200-W open frame AC/DC power supplies are fabricated on a miniature 3” x 5” PC board. Four standard models operate from a universal input of 90 V to 264 VAC, providing
POSITAL’s ACCELENS (ACS) inclinometers are now available in two major product lines. The first of these is designed primarily for industrial environments and features a tough fiber-reinforced PBT plastic housings and fully-encapsulated electronic components. These devices can
Bourns, Inc. announced the availability of a new non-contacting magnetic rotary position sensor which is asserted to help increase product lifespan and reliability of applications that operate in harsh and high vibration environments.
Ironwood Electronics has recently introduced series of high performance BGA socket for high speed probing of the memory chip and processor debugging during the design phase. One such BGA socket is designed for a 1 Gb Mobile DDR2-S4 SDRAM (12 mm x12 mm, 0.5 mm pitch, 168 FBGA Package). The stacked