Temporary manhole-mount explosion-proof LED fixture acts as convenient alternative to traditional string or tank lightsJanuary 13, 2014 12:42 pm | Larson Electronics Llc | Product Releases | Comments
The Larson Electronics MMLP-1MLED 150 watt Temporary Manhole Mount Light Fixture provides operators with a powerful and highly convenient alternative to traditional string or tank lights. LED technology, an innovative 21” man-way support bracket and compact design makes this lamp an excellent lighting solution....
Hubbell Lighting announced the perfect energy efficient luminaire for messy industrial environments—Columbia Lighting’s LXEM LED Enclosed and Gasketed Fiberglass Industrial Luminaire. Built with design flexibility in mind, the LXEM is available in a wide range of lumen packages and offered in three different lengths—all in the same family.
Molex Incorporated recently released the Impact™ 100-Ohm backplane connector, which combines speed and density in a modular package designed for high speed applications. The scalable Impact connector technology provides data rates up to 25 Gbps with excellent signal density up to 80 differential pairs per linear inch when using a 6-pair configuration.
The Larson Electronics EPLC2-HB-2X150LED-RT Explosion Proof High Bay light fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older fixtures.
The Spectroline® PC-9920A UV EPROM/Wafer Erasing System is engineered to meet high-volume production requirements. It has an operating UV intensity that is up to 60% greater than competitors’ systems, according to the company. Its nominal 254 nm irradiance of 70,000 µW/cm² over a 36 x 24 in (91.4 x 61 cm) erasing area ensures fast and complete erasure of programmed memory from every EPROM, chip or wafer — in as little as 90 seconds.
Fairchild Semiconductor’s FSL306 and FSL336 650 V Green Mode AC Buck Switches offer burst-mode operation with the low available operating current (250 µA) that helps to reduce standby mode power consumption for increased energy efficiency. Power scalability from
Global carbon dioxide (CO2) emissions continue to rise – in 2012 alone, 35.7 billion tons of this greenhouse gas entered the atmosphere*. Some of this CO2 is absorbed by the oceans, plants and soil. As such, they provide a significant reservoir of carbon, stemming the release of CO2.
The new ethermVIEW liquid crystal thermographic analysis system provides optical temperature measurements of active PCBs and components. The system uses the color response of thermochromic liquid crystals (TLC) for non-invasive thermal studies. Developed
Ironwood Electronics has recently introduced a high performance SOIC socket for 0.5-mm pitch 10-pin SOIC. The SG-SOIC-3005 socket is designed for 3 mm x 3 mm x 1 mm package size with 5-mm lead tip to tip with exposed pad on the bottom and operates at bandwidths up to 10 GHz with
Intel Corp., the world's largest maker of computer processors, says its processors are now free of minerals from mines held by armed groups in the Democratic Republic of the Congo. It's the first major U.S. technology company to make such a claim about its products. It's the fruit of four years of work by the company to determine the sources of four crucial metals widely used in electronics manufacturing: tantalum, tungsten, tin and gold.
Leviton today introduced its new Humidity Sensor and Fan Control, a state-of-the-art device featuring digital sensing technology to control ventilation in humid or damp areas in the home. The sensor is designed to detect excess humidity and automatically activate the ventilation fan to help reduce the level of condensation.
Primarily used for potting and encapsulation applications, Master Bond Super Gel 9AO is a soft, urethane modified gel-like epoxy that offers thermal conductivity and electrical insulation properties. This two part system is also employed for
MANUFACTURERS of increasingly minute computer chips, transistors and other products will have to take special note of research findings at the University of Huddersfield. The implications are that a key process used to transform the properties of nanoscale materials can cause much greater damage than previously realised.
Schaefer Inc. is proud to introduce our new PB-W (Wall-Mount) Series of three-wire and four-wire active (3x200VAC to 3x480VAC) harmonic filter modular systems that are designed to meet IEEE-519. The Power Balance (PB-W) family is scalable and offers a cost-effective solution for improving power quality for tower buildings as well as automation, wind turbine and a wide range of industrial applications. The Wall-Mount versions are ideal for mounting in small and confined areas, as well as the required “out of reach” locations.
Ingenia Motion Control released a starter kit Input/output expansion board for its Pluto Series miniature servo drives. It allows the rapid evaluation of the motion control capabilities with an easy and direct access the I/O signals available on the servo drive. The module replicates
Texas Instruments introduced its C2000 Delfino 32-bit F2837xD microcontroller (MCU) in the F2837x Series. With dual-core C28x processing capabilities and dual real-time control accelerators, also known as control law accelerators (CLAs), these MCUs provide
International Rectifier introduced the compact AUIR08152S automotive-qualified gate drive IC featuring high output current in excess of 10 A that shrinks system size and is said to boost performance in automotive and industrial high-power switching applications.
Murata announced the MEF1 Series of 1-W regulated DC/DC converters. Suitable for use in industrial, automation and instrumentation applications, these tightly regulated single output converters, rated to better than 1 percent of nominal output voltage...
Power Sources Unlimited announced the F351 Series of a step-up, full-brick DC-DC converter that delivers up to 350 W from a nominal 12-V (11-V to 18-V) input. These converters are suited for battery back-up, transportation, industrial controls and automotive applications.
Absopulse’s DRH-150 wide input range, long-life DC/DC converter for rugged industrial environments is designed for an operating life of up to 30 years. By eliminating optocouplers in the feedback loop and significantly reducing component count...
Richardson RFPD announces availability and full design support capabilities for three new 650V non-punch-through (NPT) insulated-gate bipolar transistors (IGBTs) from Microsemi Corporation (Microsemi). The new devices are the latest addition to Microsemi's family of 45A to 95A IGBTs.
The EXP-LED-HL-DFX Explosion Proof Dual Beam Headlamp is ideal for a wide variety of uses including Industrial Safety, Public Works & Utilities, Law Enforcement, Hardware/Tool, Automotive, Marine, Sporting Goods and Consumer applications.
Rotary Electric Encoders from Netzer are said to provide exceptionally accurate, high resolution, absolute position with miniature to wide diameter hollow shaft and are available with analog or digital outputs. The holistic structure of the encoder provides
Anderson Power Products (APP) introduced the 3 Position Mini PL connector. This compact, environmentally sealed (IP68) connector is capable of 22 A at 600 V (UL). The 3 Position Mini PL connector features a manual release latch to
AVX Corporation expanded its series of single poke home wire-to-board (WTB) contacts with a new family of vertical top and bottom entry contacts. Featuring high spring force, dual beam, phosphor bronze contacts, the new vertical 9296 Series provides maximum mechanical stability and wire retention