MANUFACTURERS of increasingly minute computer chips, transistors and other products will have to take special note of research findings at the University of Huddersfield. The implications are that a key process used to transform the properties of nanoscale materials can cause much greater damage than previously realised.
Schaefer Inc. is proud to introduce our new PB-W (Wall-Mount) Series of three-wire and four-wire active (3x200VAC to 3x480VAC) harmonic filter modular systems that are designed to meet IEEE-519. The Power Balance (PB-W) family is scalable and offers a cost-effective solution for improving power quality for tower buildings as well as automation, wind turbine and a wide range of industrial applications. The Wall-Mount versions are ideal for mounting in small and confined areas, as well as the required “out of reach” locations.
Ingenia Motion Control released a starter kit Input/output expansion board for its Pluto Series miniature servo drives. It allows the rapid evaluation of the motion control capabilities with an easy and direct access the I/O signals available on the servo drive. The module replicates
Texas Instruments introduced its C2000 Delfino 32-bit F2837xD microcontroller (MCU) in the F2837x Series. With dual-core C28x processing capabilities and dual real-time control accelerators, also known as control law accelerators (CLAs), these MCUs provide
International Rectifier introduced the compact AUIR08152S automotive-qualified gate drive IC featuring high output current in excess of 10 A that shrinks system size and is said to boost performance in automotive and industrial high-power switching applications.
Murata announced the MEF1 Series of 1-W regulated DC/DC converters. Suitable for use in industrial, automation and instrumentation applications, these tightly regulated single output converters, rated to better than 1 percent of nominal output voltage...
Power Sources Unlimited announced the F351 Series of a step-up, full-brick DC-DC converter that delivers up to 350 W from a nominal 12-V (11-V to 18-V) input. These converters are suited for battery back-up, transportation, industrial controls and automotive applications.
Absopulse’s DRH-150 wide input range, long-life DC/DC converter for rugged industrial environments is designed for an operating life of up to 30 years. By eliminating optocouplers in the feedback loop and significantly reducing component count...
Richardson RFPD announces availability and full design support capabilities for three new 650V non-punch-through (NPT) insulated-gate bipolar transistors (IGBTs) from Microsemi Corporation (Microsemi). The new devices are the latest addition to Microsemi's family of 45A to 95A IGBTs.
The EXP-LED-HL-DFX Explosion Proof Dual Beam Headlamp is ideal for a wide variety of uses including Industrial Safety, Public Works & Utilities, Law Enforcement, Hardware/Tool, Automotive, Marine, Sporting Goods and Consumer applications.
Rotary Electric Encoders from Netzer are said to provide exceptionally accurate, high resolution, absolute position with miniature to wide diameter hollow shaft and are available with analog or digital outputs. The holistic structure of the encoder provides
Anderson Power Products (APP) introduced the 3 Position Mini PL connector. This compact, environmentally sealed (IP68) connector is capable of 22 A at 600 V (UL). The 3 Position Mini PL connector features a manual release latch to
AVX Corporation expanded its series of single poke home wire-to-board (WTB) contacts with a new family of vertical top and bottom entry contacts. Featuring high spring force, dual beam, phosphor bronze contacts, the new vertical 9296 Series provides maximum mechanical stability and wire retention
To support end users that leverage Ethernet-based industrial networking, WAGO's PROFINET I/O Fieldbus Couplers 750 Series operate as I/O devices in the PROFINET network. The couplers identify connected I/O modules and create local process images for one or more controllers. The device ID can
Honeywell Sensing and Control’s SS360PT and SS460P high sensitivity latching Hall-effect sensor ICs with built-in pull-up resistors are suitable for demanding, cost-sensitive high-volume applications, such as commuting brushless DC motors used for medical equipment and appliances as well as for
Pepperl+Fuchs introduced R2 Series Ultra-Small Sensors - a complete family of ultra-miniature photoelectric sensors available in four sensing modes to suit varied application needs. These sensors feature a 24 mm x 7.5 mm x 11.2 mm housing, industry standard
Measurement Specialties is offering the DO-35 Series thermistor temperature sensor that provides accurate measurements across a wide resistance range of 5K Ohms to 200K Ohms at +25°C. The glass-packaged thermistor enables
Telit Wireless Solutions announced the market introduction of Jupiter SL869 V2, the second generation of one of its top performing positioning products. The new module is based on the low-power MT3333 from MediaTek. The complete multi-GNSS receiver features easy integration and superior battery-life performance....
Richardson RFPD announces availability and full design support capabilities for four new 650V Silicon Carbide (SiC) Schottky diodes from Microsemi Corporation (Microsemi). The new devices are the latest addition to Microsemi's SiC Schottky product family.
TDK Corporation announces the introduction of the TDK-Lambda DRB series of DIN rail power supplies for low power applications that require less space on the mounting rail. Designed to support the growing trend for simple and economic DIN power solutions in industrial, building automation and process control applications...
Diamond Systems unveiled Epsilon-12G2. The rugged, managed Layer 2+ Ethernet switch module offers twelve 10/100/1000 Mbps copper twisted pair ports and two small form factor pluggable (SFP) sockets in a compact COM Express form factor.
Melexis Technologies NV introduced two parts to its programmable digital Hall effect sensor line. The MLX92231 and MLX92211 feature EEPROM memory, allowing magnetic switching thresholds to be configured (including hysteresis). Both are factory pre-programmed to precise Hall effect switch or latch
The EXP-LED-F4W is an intrinsically safe 4 watt LED flashlight that has a very tight, well focused pencil beam of light. The light beam on this LED flashlight reaches 100 feet in distance. With its great runtime on three AA batteries, you won't have to worry about it going dead....
Murata today announced the MEF1 series of 1 Watt regulated DC-DC converters from Murata Power Solutions. Suitable for use in industrial, automation and instrumentation applications, these tightly regulated single output converters, rated to better than 1% of nominal output voltage, are packaged in a fully encapsulated single-in-line through-hole format....
The new 78E Series Ex Encoder from Pepperl+Fuchs is especially designed for applications in hazardous areas. The 78E Series with its “flameproof enclosure” has ATEX and IEC Ex international approval in addition to third-party approval by TÜV. It is designed for the oil/gas, refineries, mining and material handling (agriculture, chemicals) industries.