Schaefer Inc. is proud to introduce their new TER Series of rugged, ultra low-profile ac-dc power supplies designed for heavy industrial applications. All units are uniquely sealed in a heat-conducting potting material and are specifically designed for projects that demand reliable and shock resistant power supplies in the harshest operating conditions.
Vishay Intertechnology introduced three new ± 15 V precision monolithic quad single-pole single-throw (SPST) CMOS analog switches. Built on a new CMOS process, the Vishay Siliconix DG1411, DG1412, and DG1413 offer low on-resistance of 1.5 Ω.
International Rectifier announced the expansion of its family of highly integrated, ultra-compact, patent pending µIPM power modules with the introduction of the IRSM808-105MH and IRSM807-105MH, optimized for high efficiency appliance and light industrial applications with motor power up to 300W.
IXYS Corporation announced today a new high-power phase-leg in the SimBus-F outline with a total Current - Voltage capability of 600 Ampere and 650 Volt. The excellent best-in-class performance of the discrete 650 Volt XPT Trench IGBT products is now also available in module outlines, up to 600 Amperes with the IXYS fast “Sonic” diodes.
Honeywell announced that new 6000, 7000, 8000, and 9000 Series of the HumidIcon combination digital output relative humidity (RH) and thermal sensor solutions are now available. Primarily targeted for medical, HVAC, and industrial applications, these new sensors offer industry-leading long-term accuracy....
Larson Electronics has announced today the release of a new high-bay LED fixture designed to provide better performance than standard HID and incandescent high bay fixtures. The EPLC2-HB-150LED-RT Explosion Proof High Bay Light features high output in a compact size and is a rugged and light weight alternative to bulkier HID units.
I think it’s time to distinguish between an “Internet of Things” and an “Internet of useful Things.” When I’m talking to customers who are looking for remote sensor solutions, there are many fields where the IoT could really solve emerging problems. A service
Texas Instruments (TI) announced the MSP430 USB LaunchPad Evaluation Kit and supporting ecosystem of software and support for its portfolio of USB microcontrollers. The MSP-EXP430F5529LP LaunchPad, based on the low power MSP430F5529 microcontroller (MCU), provides engineers and
The CPC1968 is a single-pole normally open (1-Form-A) solid-state power relay rated for up to 5A continuous load current with a 5°C/W heat sink. The output is constructed with MOSFET switches and photovoltaic die, while the input utilizes a highly efficient GaAIAs infrared LED to provide the optically coupled control.
3D printing has been used for years in larger companies, like the one I work for now. It is incorporated into the mechanical design process as part of the overall development and is optionally tailored out if not necessary or particularly useful. When end customers, as well as designers, see a plastic mock-up of the widgit they desire...
International Rectifier introduced the IRAM630-1562F Intelligent Power Module (IPM) featuring Power Factor Correction (PFC) and inverter stage. The new IPM shrinks and simplifies design of energy-efficient appliance and light industrial motor drive applications including air conditioners and washing machines.
Modbus gateway designed to convert Modbus ASCII or Modbus RTU serial signals into Modbus TCP EthernetOctober 23, 2013 5:02 pm | B & B Electronics | Product Releases | Comments
B&B Electronics has expanded its family of Vlinx Modbus Communications Gateways with the MESP211, a low-cost, compact gateway designed to convert Modbus ASCII or Modbus RTU serial signals into Modbus TCP Ethernet. The MESP211 connects Modbus devices to Ethernet networks....
Larson Electronics has released of a camouflage LED Golight in time for the 2013 hunting season. Featuring high power LED technology and remote control operation, the GL-30814 Camouflage LED Golight Stryker offers excellent power and performance in a rugged spotlight design.
Larson Electronics has announced the release of a powerful high bay LED light designed to provide an easily mounted and adjusted source of explosion proof rated illumination. The EPLC2-HB-150LED-RT explosion proof high bay led light fixture from Larson Electronics offers operators in hazardous locations a powerful, efficient, and more durable alternative....
HARTING has expanded its PushPull device connector family with a new 10 pole PushPull Signal for delivery of analog, low voltage and bus signals in all power ranges. The new PushPull Signal has 10 contacts to transmit rated currents of 5A with conductor wiring gauges of AWG 24 to AWG 18.
The new IGEPv5 is an embedded processor development board based on Texas Instruments OMAP5432 Multimedia Application Device. The OMAP processor is designed to support high performance applications within a low power envelope, preventing the need for fans.
Larson Electronics has announced the release of a new 2 foot long high output explosion proof fluorescent fixture designed for use in areas where flammable vapors and gases may be encountered. The EPL-24-192 Explosion Proof Fluorescent Light Fixture is Class 1 Division 1 approved, paint spray booth approved, and an ideal solution for operators who want high output in a more compact fixture design.
KOA Speer Electronics introduces the latest in precision thick film chip resistors, the anti-sulfur RK73H-RT. Made with a sulfur-proof electrode material, the RK73H-RT resistor features precision tolerances of 0.5% and 1.0% and a resistance range of 10Ω ~ 10MΩ.
Larson Electronics has announced the release of a powerful new LED fixture designed to provide powerful output combined with rugged construction capable of withstanding the rigors of offshore operation. The HAL-24-3L-LED-BMSW Hazardous Area LED Light Fixture features Class 1 Division 2 approvals....
Texas Instruments unveiled what it asserts is the industry’s first inductance-to-digital converter (LDC), a data converter category that uses coils and springs as inductive sensors. This contactless sensing technology can be used to measure the position, motion, or composition of a metal or conductive
Laird announced the release of the CL024 transceiver from its Embedded Wireless Solutions unit. The CL024 transceiver is a Frequency Hopping Spread Spectrum (FHSS) radio designed for license-free operation in the 2.4 GHz Industrial, Scientific and Medical (ISM) band.
Schaefer, Inc. announces the C/B 6600 Series of 30kWatt DC-DC and AC-DC converter modules and battery charger. This highly-reliable, compact and rugged design provides a high density solution for high-power applications in industries such as utility, oil/gas, automation, heavy industrial, military, telecom/datacom...
Linear Technology Corporation introduces the LTC4120, a first for the company in the wireless battery charging space. The LTC4120 combines a wireless power receiver with a constant-current/constant-voltage battery charger, functioning as the receive circuit component in a complete wireless power transfer system....
The Rex DD-4 Digital Durometer is the successor to the popular Rex DD-3. With its impressive list of features, the DD-4 is truly state-of-the-art and is the ideal instrument for lab use. Some of the new features are a new larger LCD display, USB data ports for computer compatibility, a locking feature to prevent accidental erasure of tolerances, automatic shutoff and low battery warning.
Modular connector series addresses the rugged environmental requirements of the defense and commercial aviation marketsSeptember 27, 2013 1:57 pm | Product Releases | Comments
Smiths Connectors announced the rollout of its IDI Dovetail modular connector series. Dovetail, the latest entry in the company’s wide array of interconnect products, is a new and innovative interconnect solution that has been developed to address the rugged environmental requirements of the defense and commercial aviation markets....