NXP Semiconductors today announced the availability of a low-cost, web-enabled development tool platform, LPCXpresso, for the LPC ARM processor family of microcontrollers. The LPCXpresso features an easy-to-use interface and supports the complete product design cycle, providing an end-to-end development solution. NXP is also announcing today the launch of the industry’s first Cortex-M0 design competition, the “LPC1100 Cortex-M0 Design Challenge,” providing free LPCXpresso tools to qualified contestants.
Agilent Technologies Inc. today announced the availability of an NXP Semiconductors' design kit for RF small-signal products within Agilent's Advanced Design System (ADS). The design kit provides NXP's customers with easy access to comprehensive libraries of models within ADS for NXP's RF wideband devices, diodes, junction FET's, dual-gate MOSFET's and MMIC's. With the new design kit, customers can run simulations in ADS prior to moving to prototype. This significantly accelerates project development with NXP's components and speeds time-to-market.
AVX Corporation has expanded its 9159 Series solid-state lighting connector offering to include a miniature, single-sided SMT connector for PCB strip lighting applications. The 5 A connectors provide
Laird Technologies announced its new Q Series Thermostatic Controller for most Thermoelectric Assemblies (TEAs). The Q Series Thermostatic Controller is a microcontroller-based device that adds integrated temperature control to a TEA. The controller functions as a
BEAR Power Supplies has introduced its BE Series external AC/DC power adapters. The units are Energy Star qualified and factory-configurable for commercial, industrial and medical instruments. The BE Series includes wall-mount converters from 5 W to 30 W, and desktop converters from 15 W to 60 W. All have
Elma Electronic Inc. offers Advanced Mezzanine Card (AMC) injector/ejector handles. AMCs are the main boards for MicroTCA designs and are also implemented in some AdvancedTCA applications. The AMC handles feature exceptional quality and precision milling, so that even
Molex Incorporated added the CoEdge to its EdgeLine family of connectors. The one-piece, 25 Gbps connector is configured to meet an industry standard pitch of 0.80 mm (.031”). This low-profile, dual-sided, edgecard connector supports
Cornell Dubilier introduced two snap-in aluminum electrolytic capacitor series with extended voltage rating up to 450 VDC. Designated the Type SLP (105°C) and SLPX (85°C) Series, the capacitors are targeted for next generation
Power Partners’ PIL300U-V Series power modules for LEDs boast 300 W of output power from a wide 90 V to 305 VAC input range. Their design incorporates high PFC, meeting the requirements for EN61000-3-2. Standard output voltages range from
US Conec Ltd. announced the release of its IBC Brand Cleaner ODC. This mechanical cleaning tool uses a dry cleaning strand to remove dust and liquid residue off the end face of plug and socket ODC-Series connectors. This version of the IBC cleaning tools features a
MicroPower Direct’s MPO-75S Series of single output, 75 W AC power supplies include a universal AC input, full safety approvals, robust filtering and compact open frame construction. Four standard models operate from a universal input of 90 V to 264 VAC; providing
TT electronics BI Technologies has developed two SON (aka QFN or DFN) eight-pad packaged sample kits. Designated SFN08AKIT and SFN08BKIT, the sample kits include four or seven ultra-stable thin film resistors configured in isolated and bussed circuits, respectively. Each sample kit contains
Lumex announces the launch of its QuasarBrite UV family of LED technologies. The company asserts the UV LEDs provide a 10 times longer lifespan, tight beam angle, enhanced durability and up to 50 percent cost savings compared to alternative technologies. The family is available in 385 nm, 405 nm and 415 nm wavelengths at
The HPC series from Stackpole is a compact surface mount 5 watt resistor. The HPC Series incorporates four parallel thick film chip resistor elements to accommodate the higher power handling and the anodized heat sink allows for increased heat dissipation into the ambient air. These parallel resistance elements allow the HPC Series to withstand up to 2500 watts for pulse durations of 100 microseconds or less.
Maxon’s RE 50's "heart" is, as with all mechanically commutated maxon motor drives, the ironless rotor, which results in detent-free running and minimized mass inertia. The combination of a two-pole Neodymium permanent magnet with the patented maxon winding technology results in high torque and remarkable acceleration, says Maxon.
VITA, the trade association dedicated to fostering American National Standards Institute (ANSI) accredited open system architectures in critical embedded system applications had several of its specifications reach ANSI recognition in the past year. A total of eight specifications completed the process and reached full recognition under the guidance of the VITA Standards Organization (VSO).
Rochester Electronics, the world's largest authorized manufacturer of discontinued semiconductors, is announcing that it will provide, under a license from Intel, continuing manufacturing and customer support for Intel's IXF1002 Dual Port Gigabit Ethernet Media Access Controller, which facilitates simple network management protocol and remote monitoring management in gigabit Ethernet server environments.
C&K Components, a leading international supplier of tact switches, toggle, rocker and pushbutton switches, and smart card interconnect devices, has expanded its ZMS Series subminiature snap-acting switch line to include right-angle mount configurations. The switches now feature a mounting hole with a locating stud, along with potted wire leads in straight and right angle configurations to meet IP67 sealing specifications.
Statek Corporation announced the release of its ultra-miniature, low-profile CX18 crystal. With overall dimensions of 1.55 mm x 0.95 mm x 0.35 mm, and a typical weight of 1.8 mg, Statek’s CX18 is asserted to be the smallest and lightest surface-mount crystal in the world. The CX18 has a
National Semiconductor introduced three products in its SIMPLE SWITCHER power module family. The LMZ-Series of power modules provide the efficiency of a synchronous switching regulator with the simplicity of a linear regulator, eliminating the
The 6 A OKR-T/6 and the 10 A OKR-T/10-W12 are new additions to Murata Power Solutions' Okami family of non-isolated Point-of-Load (PoL) DC/DC power converters. The SIP packaged though-hole mounting miniature devices combine a wide input voltage range with programmable output voltage to
TURCK Inc. has expanded its Diagnostic Power Conditioner (DPC) system with a single segment redundant backplane that can combine two isolated power supply modules into one FOUNDATION fieldbus segment. The backplane includes an
Stellar Technology’s Model LPS60X AC/AC LVDT is designed for precision displacement and position measurement for quality assurance applications in industrial environments. These high accuracy displacement sensors are
Aeroflex/Metelics has announced the release of a family of surface mount GaAs and Silicon Schottky mixer/detector diodes for high volume pick and place applications. These control devices are delivered in a plastic SMT package with
The Industrial Automation Group of Advantech introduced its UNO-2173A and UNO-2173AF fanless box PCs with 1.6 GHz Atom-based CPUs. These models are equipped with Gigabit Ethernet ports, rich I/Os, one Mini-PCIe socket for WLAN and 3G solutions, and Moblin (Mobile Linux) support. Both have