NuWaves Engineering has expanded their series of High Intercept Low Noise Amplifiers (HILNATM) with the introduction of the HILNATM 3G.
E-Switch announced the KJD17 Series pushbutton switch. This heavy duty switch offers an industrial design and a PVC cap for dust and water protection, equivalent to an IP54 rating. The pushbutton switch has
Diodes has introduced the industry's smallest fully featured single-chip fan driver with high-output drive capability to provide a cost-effective solution for fan and motor drive applications.
TE Connectivity (TE) introduced the HTS DIN rail adapter. This adapter can be snapped onto EN60715 rails (IEC 715) typically used in switch cabinets. Mounting directly onto a DIN rail
Cicoil’s High Flex Unshielded Silicone Cables are designed for applications that require reliability in severe environments. According to the company, this unique silicone extruded cable is unaffected when exposed to extreme temperatures
Solvay Advanced Polymers, LLC has expanded its range of Amodel polyphthalamide (PPA) resins for automotive electronics applications. According to the company, the new Amodel Electronic (AE) grades eliminate
In today's podcast we talk to Todd Hanson of Honeywell on Wireless Industrial Sensors. Wireless switching can save up to 60% compared to traditional wired switching by reducing installation time, conduit, wire, clips and other accessories.
Silego Technology announced the GreenPAK 2, a 2.5 mm x 2.5 mm 12-pin TDFN one-time programmable logic IC with programmable analog components. GreenPAK 2 has been designed to operate as a stand alone IC capable of performing many 4-bit and 8-bit microcontroller applications or
The Mechatrolink Members Association (MMA) announced that its Mechatrolink motion control network meets industry safety standards. Certification was received after an independent third party, TÜV Rheinland, confirmed that these specifications satisfied the requirements of IEC61508 safety integrity level SIL3. A safety system can
Saelig Company introduced a new version of the MSR145 miniature datalogger, now with capability for storing over one billion readings from a number of parameters simultaneously with 12-bit resolution. This mini datalogger, previously
maxon motor’s 70-W flat brushless motor delivers a max. continuous torque of 130 mNm at an efficiency of up to 85 percent. The new motor in its 45 mm diameter is available with Hall sensors and comes in four windings (24, 30, 36, 48 V). It can be
The LPSI/LPS2 Series offered by Servoflo Corporation are ultra low differential pressure sensors measuring from 0.1” to 5” of water in various non-directional or bi-directional calibration ranges. Based on a MEMS thermo-anemometer, the series infers
Micro/sys has released a turn-key single-board-computer development environment for the Xilinx Spartan 6 FPGA aimed at accelerating development of FPGA-based applications for low-power embedded systems. The DK-FPGA1651 provides
When building electronic equipment, it is imperative to understand the coupling mechanisms of electrical noise that creates Electro-Magnetic Interference (EMI). It is also much easier to preplan a method of abatement during the build of a machine rather than try to initiate a resolution once the equipment is built. However, in reality, it’s common to have to improve or otherwise develop procedures to prevent the noise from disrupting intended signals of existing equipment or designs.
The primary selling points for MicroTCA are impressive: an affordable next-generation computing architecture, high communications bandwidth, the latest multi-core processors, support for redundancy and high availability...
OKW have added a fast-action mounting kit for the ‘ART-CASE’ Series of plastic electronic enclosures. This range is used in a very wide variety of applications including detection and monitoring devices, system controllers, home automation, medical
Texas Instruments introduced the first in a new line of integrated three-phase brushless motor pre-drivers. The DRV8301 is said to reduce board space as much as 60 percent compared to the next closest integrated solution. It can drive
The Industrial Automation Group of Advantech launched its BEMG-4110, 4220, 4221, and 4222 fanless energy data concentrators. To manage the energy consumption from a large number energy meters on a campus or group of buildings, these energy data concentrators, with their wide variety of interfaces, include
Allegro MicroSystems, Inc. announced the release of two devices that complement the next generation family of fully-integrated single, full-bridge motor driver ICs. Allegro’s A4952 and A4953 are designed for use in brush DC motor drive applications and are
In today's podcast we talk to Andreas Koller, VP of WW Sales and Marketing at Energy Micro and their Low Energy Sensor Interface (LESENSE).
International Rectifier announced the introduction of a family of 1200-V Insulated Gate Bipolar Transistors (IGBTs) for induction heating, uninterruptible power supplies (UPS) solar and welding applications. The new family of 1200-V IGBTs uses thin wafer Field-Stop Trench technology that
Linear Technology introduced the LTC2991, an eight-channel I²C temperature, voltage and current monitor for 3-V and 5-V systems. This monitoring solution incorporates a 14-bit ADC, 10ppm/°C voltage reference and I²C digital interface to provide
Fast detection of rare signal faults at an extremely high acquisition rate, excellent signal fidelity thanks to low-noise frontends, intuitive user interface for quick work: The R&S RTO for 1 GHz and 2 GHz bandwidth offers all this and much more.
This mixed domain oscilloscope (MDO) from Tektronix delivers the functionality of an oscilloscope and a spectrum analyzer in a single instrument. In this video, Gary Waldo of Tektronix shows off the new MDO.
Avago Technologies announced a high-resolution absolute optical encoder for high-performance servo and motor feedback applications. The AEAT-9000 ultra-precision absolute encoder provides desirable accuracy for