Microchip Technology Inc. announced the SSC7102—a low-power, flexible and turnkey sensor hub that makes implementing sensor fusion easy and provides an extremely large selection of supported sensors. In fact, Microchip directly partnered with multiple industry-leading sensor manufacturers and sensor-fusion specialists to create this solution, enabling faster time to market without the need for sensor-fusion expertise.
Bosch Sensortec announced the BME280 Integrated Environmental Unit, which combines sensors for pressure, humidity and temperature in a single package. This sensor has been developed to support a broad range of emerging high performance applications such as
The Super Awesome Micro Project is a car just like any other, only its made entirely of Legos. Stave Sammartino and Raul Oaida used 500,000 Lego pieces to construct the vehicle which features a car engine made from lego pieces that runs on air.
Here’s the top 10 most popular, compelling, controversial, and highly-trafficked stories from 2013. These were the posts that led the most discussions, excited the most readers (for better or worse), and caught your collective eyeballs. So check out some old favorites, or catch up on a post you may have missed — and find out what all the fuss was about!
Many of our aerial warfare and surveillance operations are now conducted in regions where we might not necessarily have air support operations near-by or they are in countries where we do not want the world to know we are conducting operations. The loss of a pilot is never something an air-wing wants to hear about....
AVX Corporation has further expanded its innovative series of single poke home wire-to-board (WTB) contacts with a new family of vertical top and bottom entry contacts. Featuring high spring force, dual beam, phosphor bronze contacts, AVX’s new vertical 9296 Series provides maximum mechanical stability....
3-D printing is spurring a new industrial revolution that is enabling design engineers to achieve new innovations in design and significant time and cost savings. The technology allows design engineers to build parts that cannot be made via traditional manufacturing, which in turn encourages heightened creativity and innovation.
I have the latest ACC with radar in my car, camera, lane departure warning, and what have you. Still, I need to watch out all the time, analyze the situation, engage, disengage, set a new setpoint, and so on. If I don’t do that, it can still become dangerous or at least uncomfortable, because the still relatively dumb system does not understand all it “sees”.
In this week's episode of the Engineering Update, brought to you by Mouser Electronics: The Royal Navy's newest nuclear-powered ballistic missile submarine — powered by a Rolls-Royce PWR3 nuclear reactor, the Successors are promised to be one of the stealthiest submarines in the world.
When the vision of a smart grid first appeared over a decade ago, it was revolutionary and broadly recognized as being so. Yet even an informal assessment of the facility and technology development necessary to realize that vision made it clear that smart grids would require a lengthy evolution.
Capacitive screens have become fairly ubiquitous in the world of electronics. You can find them in tablets, cell phones, medical devices, and pretty much anywhere else you look. But using capacitive displays in designs can still be challenging. We want to know what you (or your company or your fellow engineer) struggle with when it comes to designing with touchscreens.
Portable devices such as cell phones, MP3 players and tablets have become popular over the years. Most people own at least two of these devices. Each device requires a power adapter to charge and provide power for these portable electronics.
All electrical systems, including computers, entertainment systems, mobile phones, medical instrumentation and automotive electronics, need to be immune from damage due to electrical transients encountered on a day-to-day basis. Electrical transients can come from many sources.
Machine assembly technology for all size orders (especially small sizes) and related advances in stencil printing capability significantly impacted board level assembly in 2013. The auto assembly field has benefited tremendously from this progress. A major driver for these auto assembly changes came from advances in board packaging from active components like semiconductors....
This episode is brought to you by Components Corporation. In this week's Engineering Update: A drone that hijacks other drones, mid-air: The Skyjack seeks out wireless signals of other UAVs and take control of them, even while in flight.
Detecting counterfeit electronic components is not easy — if it was, our industry would not be suffering the $160 billion in annual risk identified by IHS Research. The industry is being forced to take action, with recent federal legislation setting an example for the entire supply chain....
If you're already signed up for Amazon prime for its next-day delivery, you might want to get onboard the drone trend since Amazon says that's the next big thing in sales. The drones would be capable of carrying packages and orders under 5 pounds to any site within 10 miles of a fulfillment center.
Modern CPV equipment consists of a metal pedestal cemented into the ground onto which a large metal frame is mounted on pivoting supports thus enabling it to move on an x-y axis with the help of a gear-drive assembly. Many CPV modules, mounted on the frame, contain a dozen or more highly efficient multi-junction interconnected CPV cells....
This episode is brought to you by SanDisk (http://www.sandisk.com/business). In this week's headlines: Spark-Renault debuts the Formula E car: The all-electric Formula racer by Spark-Renault will soon begin racing in 2014. The 18-rotor electric Volocopter: E-volo's Volocopter resembles a quadcopter with 18-rotors.
A large number of legacy industrial PCs (IPCs) are still deployed in active control and monitoring roles. Most of these IPCs are running older, out-of-support operating systems such as Windows 2000 or XP. Microsoft Windows 2000 support expired July 2010, and Windows XP support ends April 2014.
What’s the best technique for temperature management of sensitive components in extreme environments?November 22, 2013 4:33 pm | Articles | Comments
When it comes to environmental monitoring, most designers focus on temperature sensing for which there are a multitude of options. Few designers consider the benefits of including relative humidity (RH) sensing in their systems, which can be added to temperature sensing solutions without compromising board space and at very little additional cost.
Who says ECN's editors can't have a bit of fun? Enjoy these bumbles, stumbles, and hilarious outtakes from the latest edition of ECN's premier video series, Engineering Update. Thanks to Managing Editor Kasey Panetta for being such a great sport!
Welcome to Engineering Update, brought to you by Mouser Electronics (http://www.mouser.com). I'm Kasey Panetta, managing editor of ECN. In this weeks episode: Daz Fellows has a custom jet luge, which features twin-turbines with a combined output of 537 pounds of thrust and a custom board made from carbon fiber, and next year, he will attempt to reach a speed of 300 mph.
This episode of ECN's Engineering Update is brought to you by SanDisk (http://www.sandisk.com/business). In this week's headlines: Hirobo's HX-1 unmanned electric helicopter: Japan's HX-1 from Hirobo is a personal manned BIT electric micro helicopter.
It's about to be a new year at ECN and we're looking forward to the future with a Brainstorm about alternative energy! It's a hot topic in engineering and around the world as researchers, designers, and politicians try to figure out what the energy of the future will be. This month, we're focusing in on SOLAR POWER with a question for our readers