Imagine a field of small wires—standing at attention like a tiny field of wheat—gathering the Sun’s rays as the first step in solar energy conversion. Researchers have achieved new levels of performance for seed-free and substrate-free arrays of nanowires from a class of materials....
Physicits using a supercomputer have captured fundamental insights about what happens when objects moving freely jam to a standstill. Their approach captures jamming -- objects come together too tightly to move -- by identifying geometric signatures....
Scarce and expensive raw materials, rising energy prices, climate protection, and demographic shifts leave industrial production with a lot to contend with in the coming years. In the “ E3-production” lighthouse project, researchers are laying the groundwork to achieve sustainable production....
The worldwide demand for solar and wind power skyrockets. Since 2009, global solar photovoltaic installations have increased 40 percent a year on average, and the installed capacity of wind turbines has doubled. The dramatic growth of the wind and solar industries has led utilities to begin testing large-scale technologies....
New materials and technologies are making it possible to utilize thermal energy more efficiently. Visit Hall 13 at the Hannover Messe (April 7-11) to find out how researchers from the Fraunhofer Energy Alliance are applying this to heat and cool spaces and industrial processes.
Researchers from ETH Zurich and Empa have succeeded for the first time to produce uniform antimony nanocrystals. Tested as components of laboratory batteries, these are able to store a large number of both lithium and sodium ions. These nanomaterials operate with high rate and may eventually be used as alternative anode materials in future high-energy-density batteries.
Engineers would love to create flexible electronic devices, such as e-readers that could be folded to fit into a pocket. One approach they are trying involves designing circuits based on electronic fibers, known as carbon nanotubes (CNTs), instead of rigid silicon chips.
A waste product from making paper could yield a safer, greener alternative to the potentially harmful chemical BPA, now banned from baby bottles but still used in many plastics. Scientists made the BPA alternative from lignin, the compound that gives wood its strength, and they say it could be ready for the market within five years.
Imagine powering your cell phone by simply walking around your office or rubbing it with the palm of your hand. Rather than plugging it into the wall, you become the power source. Researchers at the 247th National Meeting & Exposition of the American Chemical Society (ACS), the world's largest scientific society, presented these commercial possibilities and a unique vision for green energy.
Sales of electric vehicles (EVs) nearly doubled in 2013, but most won't take you farther than 100 miles on one charge. To boost their range toward a tantalizing 300 miles or more, researchers are reporting new progress on a "breathing" battery that has the potential to one day replace the lithium-ion technology of today's EVs.
As the United States continues to lead the world in the production of natural gas, scientists from the Florida campus of The Scripps Research Institute (TSRI) have devised a new and more efficient method with the potential to convert the major components found in natural gas into useable fuels and chemicals—opening the door to cheaper, more abundant energy and materials with much lower emissions.
America's current energy boom may take a new direction thanks to the discovery of a new way to turn raw natural gas into upgraded liquid alcohol fuel. In the March 14 issue of Science magazine, chemists from Brigham Young University and The Scripps Research Institute detail a process that could reduce dependence on petroleum.
The Energy Department’s National Renewable Energy Laboratory (NREL) has developed a web-based tool to help consumers better understand the energy performance of building-related products. The Technology Performance Exchange™ (TPEx™) is a portal that helps manufacturers and other organizations that measure and test products easily share performance data with product consumers.
A new £20 million three-year programme that will support research to develop new low carbon manufacturing processes and technologies, low carbon cities and offshore renewables in the UK and China was agreed yesterday, Wednesday 5th March 2014.
Vertimass LLC, a California-based start-up company, has licensed an Oak Ridge National Laboratory technology that directly converts ethanol into a hydrocarbon blend-stock for use in transportation fuels. The ORNL technology offers a new pathway to biomass-derived renewable fuels that can lower greenhouse gas emissions and decrease U.S. reliance on foreign sources of oil.
One of the biggest challenges that consumers and service providers will have in the future is maintaining a wide range of sensor and control devices located throughout the smart home. For ease of use and installation, it makes much more sense to have these powered by either batteries or by energy harvesting technologies.
For the past decade or more, as Al Gore and the majority of climate-change scientists have insisted that the world is speeding headlong toward an environmental catastrophe of epic proportions, European countries have adhered to stringent emission controls....
With the explosive growth of bandwidth demand in telecommunications networks, experts are continually seeking new ways to transmit increasingly large amounts of data in the quickest and cheapest ways possible. Photonic devices—which convert light to electricity and vice versa—offer an energy-efficient alternative to traditional copper network links for information transmission.
Being able to charge 30 electric cars at once requires ingenious energy management. Researchers are incorporating renewables into the design of a smart grid for Germany’s largest charging station. The network of charging stations for EVs is becoming more tightly meshed.
Colorful, see-through solar cells invented at the University of Michigan could one day be used to make stained-glass windows, decorations and even shades that turn the sun's energy into electricity. The cells, believed to be the first semi-transparent, colored photovoltaics, have the potential to vastly broaden the use of the energy source.
University of Cincinnati researchers are reporting early results on a way to make solar-powered panels in lights, calculators and roofs lighter, less expensive, more flexible (therefore less breakable) and more efficient. Fei Yu, a University of Cincinnati doctoral student, will present new findings on boosting the power conversion efficiency of polymer solar cells on March 3, at the American Physical Society Meeting in Denver.
Transducers USA (Elk Grove Village, IL) has introduced their new piezo ceramic MLCT (Multilayer Ceramic Transmitter) series. Its unique simple acoustic multi-layer ceramic construction produces a high output of 80 Db with only 16V low driving voltage.
Generating electricity is not the only way to turn sunlight into energy we can use on demand. In a study published last week in the journal Science, Choi and postdoctoral researcher Tae Woo Kim combined cheap, oxide-based materials to split water into hydrogen and oxygen gases using solar energy with a solar-to-hydrogen conversion efficiency of 1.7 percent, the highest reported for any oxide-based photoelectrode system.
Earlier this month, NJIT formalized an agreement with Chinese partners that will advance the university's research on thin-film solar cells, an alternative energy technology with the potential to make buildings and other infrastructure substantially more energy-efficient.
The University of Tennessee, Knoxville, will be part of a national effort, announced today by President Barack Obama, which could lead to more fuel-efficient cars and decreased costs for ships and aircraft. Suresh Babu and a team of faculty will help lead UT's research effort in the $140 million Detroit-based institute....