Megger raised close to $4,000 for Phoenix Children’s Hospital Foundation on Saturday, January 25 at its 13th annual Megger Distributor Golf Event. The outing, which took place at the Lakes of Ahawatukee Golf Course in Phoenix, Arizona, is held each year in honor of 17 year old cancer graduate, Tyler Danner.
If your own organization hasn’t jumped onto the bandwagon and outsourced most or all of its...
I spent some time on the show floor at DesignCon today, and learned about some serious supply...
As processing speeds in electronics continue to rise, and packaging continues to shrink, sensitive internal components are located closer and closer together. Higher clock speeds coupled with increased density of components leads to increasing amounts of electromagnetic interference (EMI) and Radio Frequency Interference (RFI) noise.
Electronic component distributors historically have simply been an outlet from which to source parts. Not so long ago, customers paged through gigantic catalogs searching for specific parts by category. Then, orders were often placed with multiple distributors selected by order type – a single part or a volume order.
The automotive industry is undergoing two major paradigm shifts that each will demand more involvement from the distribution channel. The first of these is the race to more fuel efficiency for vehicles that will be coming down the pike in the future. By 2025, automotive fuel efficiency must reach an average of 54.5 miles per gallon.
Allied Electronics (Allied) and RS Components (RS), the trading brands of Electrocomponents plc announced DesignSpark Mechanical, a new 3D solid modeling and assembly tool that is available to all –free of charge. Developed in conjunction with SpaceClaim, the new easy-to-use DesignSpark Mechanical are intended to...
Like many consumer electronics organizations, HP Digital Camera saw that its people were working hard, but they also knew that they were not meeting deadlines and were not as productive as they needed to be. In the year before implementing the steps necessary to eliminate organizational multitasking, HP Digital Camera had released six different models of digital cameras,
Nearly all of the research on multitasking to date has studied its effects on individuals. Researchers have not yet paid much attention to the effects of multitasking on organizations, but there are good reasons to believe that multitasking has similar effects at an organizational level. After all, people do not typically work independently in organizations
From the corner offices across America to the halls of Capitol Hill, leaders in the public and private sectors are sounding the call for economic reform and job creation. As the U.S. looks to forge a path for sustainable economic growth for the nation, there is a powerful business tool that can help U.S. industry to fuel business performance and drive growth.
“We’re the breath of fresh air the industry needs,” states Jeff Simon, chief executive manager of America Semiconductor. Although the term “start-up” probably isn’t completely accurate, the four-month company represents a new entry to the semiconductor marketplace.
Mouser Electronics is offering an expanded range of Texas Instruments’ ultra-low power MSP430 Value Line Microcontrollers, providing superior 16-bit MCU performance and industry leading ultra-low power consumption for cost-sensitive applications that have traditionally depended on low cost 8-bit microcontrollers.
In 1973, Glenn Smith was just a college kid who went to work part-time in the warehouse of what was little more than a mom and pop electronics catalog start-up in San Diego. Smith was one of a dozen employees. Today, Smith celebrates his 40th anniversary with global distributor Mouser Electronics as the company’s president and chief executive officer.
Mouser Electronics announced it is stocking the new XLamp MK-R LEDs from Cree, which leverage the SC³ Technology next-generation LED platform to deliver up to 200 lumens-per-watt. Cree XLamp MK-R LEDs are built on Cree's revolutionary SC³ Technology platform, delivering up to 200 lumens-per-watt....
Mouser Electronics announced the 40th company anniversary milestone of Glenn Smith, Mouser’s President and Chief Executive Officer. In 1973, Pong was cutting edge in the world of video games, music came on eight-track tapes, TV viewing was limited to three networks and Glenn Smith was a college kid....
Mouser Electronics announced it is stocking the new LUXEON M LEDs from Philips Lumileds, delivering high flux density and high efficacy with Freedom From Binning. Philips Lumileds LUXEON M is an illumination grade LED designed to enable indoor, outdoor, and industrial applications and is optimized either for high efficiency or low cost, where exceptional flux density and uniformity are critical.
We asked our industry experts and ECN readers to weigh in on our distributors question: What improvements would you like to see from distributors in the next 12 months? Here is what they had to say about the current state of the industry and hot it needs to be improved...
Mouser Electronics announced it is stocking the world’s first round LED, the CBT-140 Big Chip Round LEDs from Luminus Devices. This new round emitting aperture provides the most efficient match for circular optical systems and narrow beam projectors.
Mobility continues to be the hottest trend for the semiconductor and electronics industry. As though there were any need for supporting data, the major electronics shows from the first quarter of 2013 displayed and demoed the latest array of mobile devices.
Apple is seeking a patent for an iPhone that has a display that wraps around the edges of the device, expanding the viewable area and eliminating all physical buttons. The patent application reveals that Apple has put some thought into a device that takes advantage of a new generation of displays, which don't have to be flat and rigid like today's liquid-crystal displays, or LCDs.
When to choose a contract assembly source in North America five to seven years ago, the push to off-shore contract assembly was at its peak and with good reason. US demand was up, and volumes were increasing. US labor and raw material costs had risen dramatically. Cheap knock-offs from Chinese companies were flooding the market.
How do you deal with distributors? Distribution is a key aspect of the engineering process, and it's important to choose the right distributor. You need dependibility, reliability and transperency to make the relationship between distributor and manufacturer work.
Making permanent connections is as easy as pie for fans of the credit-card size computer sensation known as Raspberry Pi. Available in full, half and quarter sizes at leading electronics distributor Newark element14, Adafruit’s Perma-Proto for Pi Breadboard PCB kits feature the same labelled breakouts as their Pi Cobbler, assuring a seamless transition.
In early January 2013, the CBC News concluded its investigation about Canada’s new Hercules C-130J aircraft military transport aircraft containing counterfeit Chinese parts in the cockpit instrumentation. The report confirms what a leading U.S. testing lab has known since 2010 — that the parts are fake and could leave pilots with blank instrument panels in mid-flight.
Female professors are almost 50 percent less likely than their male counterparts to be invited to join corporate scientific advisory boards (SABs) and start new companies mainly because of gender stereotyping, says University of Maryland researcher Waverly Ding, an assistant professor of management at the Robert H. Smith School of Business.
Leave it to MIT to come out with 4D printing, just as 3D printing seems to be really hitting its stride. They can’t just leave well enough alone, can they? We’ve talked a little bit about the potential of 3D printing and the pretty amazing things they can do, so now we’re moving on to 4D.
Mention the words "3D printed guns" and you’ve got an instant, increasingly heated debate on your hands. When you consider there were 16 mass shootings—defined as a shooting with multiple, random victims—in 2012 with at least 88 people dead including children, it’s definitely a topic worth discussing. My take? No one needs a 3D printed gun or the ability to create one.
Bottles, packaging, furniture, car parts... all made of plastic. Today we find it difficult to imagine our lives without this key material that revolutionized technology over the last century. There is wide-spread optimism in the scientific community that graphene will provide similar paradigm shifting advances in the decades to come.
- Page 1