In today's podcast we talk to Mike Beunder, CEO of Vector Fabrics on optimization and parallelization of applications for multi-core processors.
WIN Enterprises announces thePL-80320, a fanless box computer for embedded applications powered by VIA Nano/Eden processors.
Ericsson has introduced two sixteenth-brick format DC-DC converters that are asserted to provide designers with quick and reliable board-mounted power solutions, addressing increasing demands for shorter time-to-market. Designed to
PLX Technology, Inc. expanded its PCI Express (PCIe) Gen3 switch family with three new devices compliant with the PCI Express Gen3 r1.0 Specification. The new PLX ExpressLane PEX8749 (48-lanes, 18 ports), PEX8733 (32 lanes, 18-ports) and PEX8725 (24 lanes, 10 ports) PCIe Gen3 switches promise
The Tinker's Toolbox - McObject CEO Steve Graves on Database Systems and Distributed Embedded SoftwareSeptember 19, 2011 5:47 am | Podcasts | Comments
In today's podcast we talk to McObject CEO Steve Graves about database system management and distributed embedded software.
The DFI Technical Group today released the preliminary DFI 3.0 specification defining an interface protocol between DDR memory controllers and PHYs. The new specification enables the development of chips to support the emerging DDR4 memory standard.
AVX Corporation has developed a broadband inductor that offers low insertion loss up through 40 GHz. Featuring a pyramid shape and rugged powdered iron core, the GL Series broadband inductor provides
Unlike human-to-human gesturing, human-machine gesturing does not have a foundation of thousands of years of history to use as a context. This poses a challenge for human interface system designers. If a user performs a gesture, how does the machine know how to react in a manner that is commensurate with the user’s intentions?
STMicroelectronics has worked with Microsoft to enable ST’s NFC solution support for the upcoming Windows 8 operating system. ST will demonstrate its NFC solution at the Microsoft BUILD conference
Power Integrations introduced HiperLCS, a family of high-voltage LLC power supply ICs that incorporate the controller, high- and low-side drivers, and both MOSFETs into a single package. These ICs offer the flexibility to optimize designs either for high
Micro/sys has released a turn-key single-board-computer development environment for the Xilinx Spartan 6 FPGA aimed at accelerating development of FPGA-based applications for low-power embedded systems. The DK-FPGA1651 provides
The primary selling points for MicroTCA are impressive: an affordable next-generation computing architecture, high communications bandwidth, the latest multi-core processors, support for redundancy and high availability...
The Industrial Automation Group of Advantech launched its BEMG-4110, 4220, 4221, and 4222 fanless energy data concentrators. To manage the energy consumption from a large number energy meters on a campus or group of buildings, these energy data concentrators, with their wide variety of interfaces, include
Semtech’s SC5010 eight-channel white LED driver with PWM phase-shift dimming control uses very low-profile inductors, allowing LED drivers to be built directly into the LCD panel in Ultrabook PCs and ultra-mobile PCs (UMPC) for displays as thin as 4 mm. It also enables
Allegro MicroSystems, Inc. announced the release of two devices that complement the next generation family of fully-integrated single, full-bridge motor driver ICs. Allegro’s A4952 and A4953 are designed for use in brush DC motor drive applications and are
Sparked by Apple Inc.’s adoption of accelerometer technology in its iPhone and iPad lines, the market for motion sensor devices in smartphones and tablets is set to nearly double during the next five years, according to a new IHS iSuppli MEMS & Sensors Special Report from information and analysis provider IHS
Comchip Technology has developed a 3.3-V unidirectional four-line electrostatic discharge (ESD) protection diode array that meets the immunity requirements of IEC 61000-4-2 level 4 (±20 kV air, ±15k V contact discharge)
I'll admit to having been a software engineer in the late 1970s and early 1980, coding for 4,8 and 16 bit processors respectively.Thirty years on, and the embedded software revolution has transformed design engineering.
The HyperSpeed Plus cores have been proven to process complex data streams in continuous real-time at data rates in excess of 52 Giga samples per second for a 2048 point FFT implemented on a Xilinx Virtex-6 FPGA device.
Linear Technology introduced the LTC2991, an eight-channel I²C temperature, voltage and current monitor for 3-V and 5-V systems. This monitoring solution incorporates a 14-bit ADC, 10ppm/°C voltage reference and I²C digital interface to provide
Analog Devices introduced a 200-MHz version of its ADSP-BF592 Blackfin embedded processor that delivers 400-MMAC performance for $1.99 each (in 1,000-unit quantities). The 200 MHz version achieves
Microchip Technology Inc. announced a Power-Line Modem (PLM) PICtail Plus Daughter Board Development Kit (part # AC164145) that is compliant with the utility frequency band and enables products to communicate using
The Pittman family of slotless brushless DC servo motors are used to power a wide range of applications for the medical/biotech, semiconductor processing, business and computer equipment, and automation industries. The motor’s
The HPC12 from Stackpole is a high power handling SMD resistive device. It is rated for 5 W of power in free air, but can handle 12 W continuously with 400 lfm air movement on standard recommended solder pads with
Pickering Interfaces is expanding its range of LXI switch solutions with the introduction of the 60-590 high density matrix. The matrix can be provided in configurations of 40x40 or 40x20 and has provision for loop thru connections and