What’s the best technique for temperature management of sensitive components in extreme environments?November 22, 2013 4:33 pm | Articles | Comments
When it comes to environmental monitoring, most designers focus on temperature sensing for which there are a multitude of options. Few designers consider the benefits of including relative humidity (RH) sensing in their systems, which can be added to temperature sensing solutions without compromising board space and at very little additional cost.
The advancement of the ultra low resistance Polymer Positive Temperature Coefficient (PTC)...
3D printing has been used for years in larger companies, like the one I work for now. It is...
Here at ECN we're always looking for what's going to change the world of electrical design. This month we're focusing on board-level assembly. From adhesives to thermal gap pad management, we want to know what's happening in your lab and on your benches! We know our readers have varied opinions and valuable experiences...
Here at ECN, we love hearing from our own readers about different trends and new technologies you guys are working with! We like it so much we're devoting an entire issue to what our readers think about the impact of different technologies on their jobs and projects. Our forth and final category is automotive technology.
Here at ECN we're always looking for what's going to change the world of electrical design and make life better for our engineers. For November 15, we're focusing on Temperature Management. We know our readers have varied opinions and valuable experiences – now here’s a great opportunity to showcase them.
Paul Kierstead, Director of Marketing, Cree SiC Power With its proven ability to sustain high power densities in smaller devices, silicon carbide (SiC) material based power devices are now poised to replace silicon (Si) components, creating the potential to revolutionize energy efficiency and system performance in many types of power electronics systems.
Here at ECN we're always looking for what's going to change the world of electrical design and make life better for our engineers. For November, we're focusing on circuit protection. We know our readers have varied opinions and valuable experiences – now here’s a great opportunity to showcase them.
Here at ECN we're always looking for what's going to change the world of electrical design and make life better for our engineers. This month we're focusing on Time-to-Market strategies. We're looking at it a little bit differently and discussing the issues from the viewpoint of 3D printing and rapid prototyping.
Mike Kabala, ECN Reader The next advance in NFC will be in the area of multi-factor authentication. The current forerunner in this area is the Yubikey Neo, which contains both USB and NFC interfaces. Further advancement should eliminate the need for the USB connection, allowing a contact-free way of generating a one-time password for use in authentication.
V.Kadal Amutham, Reader: Already many countries are implementing mobile payment for ticketing in the bus / train and purchases at stores avoiding credit cards.Another possibility for this technology is as follows. The mobile phone will store any personal data like, size of cloth, preferred brand of many household items.
The biggest challenge is that LED chips are quickly approaching their theoretical limits for efficient light output. As they do, incremental improvements to the LED die are providing diminishing returns on investment. Fortunately, innovations in optical silicone packaging materials are introducing new, more cost-effective ways to enhance efficiency (lm/W), as well as cost (lm/$) and light density (lm/cm2).
Adeline Chan, product marketing manager, Cree, Inc.: LED technology has been evolving rapidly over the years. From a performance perspective, lumen output and efficacy numbers have been improving. Other “areas” of the LED technology have also progressed such as thermal properties, substrate materials, light distribution pattern,
Here at ECN we're always looking for what's going to change the world of electrical design. This month we're focusing on new material technology. From adhesives to thermal gap pad management, we want to know what's happening in your lab and on your benches!
What feature or trend will become hot technology in automotive infotainment the next year? (Part II)June 13, 2013 3:37 pm | by Kasey Panetta, Associate Editor | Blogs | Comments
What feature or trend will become hot technology in automotive infotainment the next year? Tullio Cettolin: Consumers love the world of apps and instant Internet connectivity, and now they want it in their cars, too. Maybe they want to listen to their favorite Hawaiian music station via Tune-In during their daily commute on the U.S. continent.
What feature or trend will become hot technology in automotive infotainment the next year? The next wave of innovation in automotive infotainment will center around connectivity and personalization. As more cars are enable to connect to cloud based applications via the internet, more features will be added allowing passengers to engage with their social network, update location and access specific content.
Here at ECN we're always looking for the "next big thing" and this month we're focusing on near-field communications. NFC only seems to be increasing in popularity and usage across the electronics board, but we want to know what's happening in your labs and on your benches.
What steps are necessary to keep counterfeit components out of the supply chain? Are more industry standards needed? Stop having unrealistic pricing expectations. Understand and qualify quality vendors of all kinds. Allocations and obsolescence are part of our industry....
We asked our industry experts and ECN readers to weigh in on our distributors question: What improvements would you like to see from distributors in the next 12 months? Here is what they had to say about the current state of the industry and hot it needs to be improved...
With Google's self-driving car hitting the road and all sorts of driver-assistance features hitting the showroom, it's a crazy time for drivers and designers alike. Cars are practically overflowing with (good and bad) attempts to integrate outside technology (smartphones, weather apps, virtual assistants) into vehicles interfaces.
How do you deal with distributors? Distribution is a key aspect of the engineering process, and it's important to choose the right distributor. You need dependibility, reliability and transperency to make the relationship between distributor and manufacturer work.
We asked our industry experts to weigh in on our Smart Grid question: What home energy technology do you expect to see as a breakthrough in the next 12 months?
Our energy and Smart technology experts weigh in to answer our smart grid question for this month: What home energy technology do you expect to see as a breakthrough in the next 12 months?
Reader's Response: What energy management technology will generate the most buzz over the next 12 months?March 22, 2013 12:31 pm | by Kasey Panetta, Associate Editor | Articles | Comments
We wanted the lowdown on Smart Grid and the future of the engineering, so we asked our readers to answer a question: What energy management technology will generate the most buzz over the next 12 months?
How would you stop counterfeiting? One of the hottest topics in electronic components--and basically every other industry-- is how to deal with the issue of counterfeiting. So we put it to the readers to come up with the best solutions for the counterfeiting crisis.
Q: What role will sensors and controls play in emerging solid state lighting applications? Solid-state lighting technology is a natural fit in our digital, wireless world. Adaptive control and wireless sensor networks are the key to ever more sophisticated LED lighting schemes including dimming,
Q: What role will sensors and controls play in emerging solid state lighting applications? Where will the Internet of Things make its big commercial debut? Probably a few feet above your head. Intelligent sensing systems — installed and configured in overhead lighting systems and combining motion, temperature and light sensors with microprocessors, imagers and LEDs
We know ECN readers have varied and valuable opinions – now here’s a great opportunity to showcase them. Send us an answer to the question below and if we think yours is the best, we’ll feature your response in the April print issue. Plus, you’ll get a $15 Starbucks gift card simply for sharing your thoughts.
- Page 1