PREMO enlarges its SDTR1103 family with the new SDTR1103-HF series. This new SMD antenna is suitable for signal´s reception at 2MHz and/or 13,56MHz Tx/Rx for NFC applications. The antenna has a high surface resistance NiZn ferrite core material (>10Mohm/mm) and low initial permeability to work at high frequency.
TÜV Rheinland and GreenSoft Announce Partnership, Aiding Manufacturers to Meet Environmental RequirementsJune 22, 2011 9:57 am | News | Comments
TUV Rheinland has entered into an agreement with GreenSoft Technology, where the global certification company will have access to GreenSoft’s environmental compliance data collection service, including its multi-million-part database, to provide RoHS and REACH services to its clients.
RLE Technologies, announces the release of the SeaHawk™ LD2100. The LD2100 is an update to the SeaHawk™ LD2000 controller and expands on its existing technology by improving several capabilities and introducing advanced new features.
Vislink announced that on 2nd June 2011 it acquired the entire issued share capital of Gigawave Limited for a cash consideration of £3.75 million.
Murata Power Solutions has introduced the OKI-T/36W series of SMT point of load (PoL) DC-DC converters to its popular Okami range. Offered in the same DOSA standard SMT pinout as the company's OKY-T/3 and -T/5, the 24Vin OKI-T/36W series further extends Murata Power Solutions' point of load product offering.
WAGO Corporation’s 750-880 “ETHERNET 2.0” Programmable Fieldbus Controller packs 1MB data memory and SD port for up to 8GB of extra memory. Third in WAGO’s new “ETHERNET 2.0” platform, 750-880 increases intelligence and high-frequency processing — up to 1000 instructions within 235? — for industrial Ethernet applications.
Molex recently released the ClipLok interconnect clip, an electomechanical connection that easily attaches to secure a membrane switch or FPC tail firmly to a printed circuit board, eliminating the need for mating connectors at each point.
Libelium announces the completion of its Smart Cities platform. A new sensor board measures noise pollution, dust quantities, structural health and garbage levels.
XP Power announces two additions to its range of ultra compact high power density AC-DC power supplies. New products include the introduction of the encapsulated single output ECE series, and multiple output models of the existing ECL family.
ComNet has been approved by Code Blue of Holland, MI to supply fiber optic media converters and EoVDSL modems for use with their line of IP-Compatible phones and emergency call boxes.
Endevco ISOTRON Piezoelectric Accelerometer Supports High-reliability Vibration Measurement RequirementsJune 22, 2011 7:51 am | Product Releases | Comments
Meggitt Sensing Systems, a Meggitt group division, has introduced the Endevco® model 25A, the world’s smallest ISOTRON® (IEPE-type) piezoelectric accelerometer, designed to support high-reliability vibration measurement requirements on very small structures and objects.
Further expanding national distribution channels for its patented mobile app platforms, MacroSolve announced a distribution agreement with Ad Giants.
Molex Incorporated recently released the ClipLok™ interconnect clip, an electomechanical connection that easily attaches to secure a membrane switch or FPC tail firmly to a printed circuit board
Sensortechnics’ new KMA series measures gage pressures of corrosive and aggressive gases and liquids in ranges from 500 mbar to 100 bar (7 to 1450 psi).
XP Power announced today two additions to its range of ultra compact high power density AC-DC power supplies. New products include the introduction of the encapsulated single output ECE series...
Miniaturization is one of the biggest trends in medical device development today. Ensuring that these devices, as they get smaller, are still able to be connected reliably and securely is no simple task. This presentation discusses the miniaturization trend in the medical...
The affordable NEW TCS 1200 is a highly accurate and portable dry block calibrator featuring a temperature range up to 1200°C.
The process of power supply design can be an over-whelming task from understanding the complexity of your circuit to the challenge of getting help from the chip distributor. As an applications engineer by trade, this article is not going to work in my favor!
LeCroy Corporation will showcase the most comprehensive and only protocol-aware suite of test and debug solutions for the PCI Express 3.0 (PCIe 3.0) specification at the PCI-SIG Developers Conference in Santa Clara, CA, June 22-23.
Developers of new systems ideally should make decisions regarding clocking requirements early in the design process. Although clocking rates are critical parameters that should be known in advance, determining these rates sometimes requires experimentation and re-evaluation.
Globalstar announced that the second launch of six new Globalstar satellites is scheduled for July 11, 2011 from the Baikonur Cosmodrome in Kazakhstan.
The Spectroline® CellBlaster™ is the world’s first universal UV cell phone sanitizer
Disaster Relief Contractor Partnership for Response and Recovery Inspections Uses RFID to Track Inspection Kit AssetsJune 22, 2011 5:24 am | News | Comments
Disaster relief contractor Partnership for Response and Recovery Inspections, a joint venture of Dewberry & Davis and URS, put RFID technology’s ability to track government assets to the test in the aftermath of tornadoes, storms and floods that struck the southeastern United States in April 2011.
Cree 1200V Z-Rec Family of Silicon Carbide Schottky Diodes Offers Higher Performance at Lower Cost for Power Conversion ApplicationsJune 21, 2011 12:55 pm | Product Releases | Comments
Cree announces a new family of seven 1200V Z-Rec silicon carbide Schottky diodes optimized for price and performance and available in a range of amperages and packages.