Advertisement
Products

Boards & Modules

LISTED UNDER: Boards Kits PCBs Terminals

3U CompactPCI processor blade presents high reliability for railway services

ADLINK Technology announced availability of its new 3U CompactPCI processor blade, the cPCI-3620, which runs on a low power, quad-core Intel Atom System-on-Chip (SoC) carrying up to 4GB DDR3L-1333 ECC soldered memory and providing…

Chassis platform maximizes computing density with full redundancy

Vadatech, Inc.

VadaTech (Henderson, NV) now offers a 1U MicroTCA chassis platform with several unique design features that allow more slots in a front-to-rear cooled solution while maintaining full redundancy. The VT840 employs several design concepts to maximize computing density....

Motion controllers expand their program memory

Galil Motion Control

Galil Motion Control (Rocklin, CA) announced more program memory for the DMC-40x0 and DMC-41x3. This release doubles the program memory from 2000 x 80 characters to 4000 x 80 characters and increases the total array elements from …

Computer Peripherals & Networking Devices

LISTED UNDER: Computers

3U CompactPCI processor blade presents high reliability for railway services

ADLINK Technology announced availability of its new 3U CompactPCI processor blade, the cPCI-3620, which runs on a low power, quad-core Intel Atom System-on-Chip (SoC) carrying up to 4GB DDR3L-1333 ECC soldered memory and providing…

ITAR-free OpenVPX rugged mission computer targets compute-intense applications

Curtiss-Wright Controls

Curtiss-Wright Corporation (Ashburn, VA) announced that its Defense Solutions division has introduced a new fully integrated, ITAR-free compact mission computer, the MPMC-9365 Multi-Platform Mission Computer (MPMC). The compact, SWaP-optimized MPMC-9365 supports up to...

COTS card performs data acquisition, signal processing and storage in XMC form factor

4Dsp, Inc.

4DSP’s (Austin, TX) FM788 FPGA-based COTS card is designed to perform in a variety of applications, including beamforming, direction finding, RADAR, and satellite communications. This XMC module is based on Xilinx’s Virtex-7 and features …

Cooling & Thermal Management

AC & DC axial fans available for harsh environments and IP56 rated

Qualtek Electronics Corp.

Qualtek (Mentor, Ohio) introduces its series of high-performance, low-cost HPLC series, AC and DC axial fans tested to withstand harsh environmental conditions, including dust and water. The axial fan series, with sizes ranging from 172mm to 280mm, have met or exceeds the international standard IEC 60529....

2014 IMPACT Award Winner: JARO Thermal wins for Cooling and Thermal Management

Jaro Thermal

The Three-Phase (wired) “Motor-to-DC”, sensorless, brushless, low-vibrating, high-efficiency, UL/ CUL & CE certified fans from JARO Thermal (Boca Raton, FL) uses significantly less power than most standard, single-phase wired fans. Available with an optional water-protected IP 55 rating ...

Thermal controller designed to operate with thermoelectric modules

Oven Industries, Inc.

Oven Industries’ (Mechanicsburg, PA) Model 5R7-350/347 is an economical thermal controller especially designed to operate with thermoelectric (Peltier effect) modules. Most of these modules may be operated in either a cooling mode or a heating mode depending on current direction....

Electromechanical/Mechanical Devices

Relay includes contact rating of 10A@250VAC

Cit Relay & Switch

The CIT Relay & Switch (Minneapolis, MN) J107E1 series is the industry standard 10amp featuring 12 and 24 volt coil. The rugged J107E1 is low in cost and offers solutions in a variety of applications. Small in size and robust, this high performance relay is cUL listed....

Switch rated for 120V AC and 350 VDC power

Hsi Sensing

HSI Sensing (Chickasha, OK) has released the HSA-12115 reed switch, its most powerful bi-stable latcher to date. Engineered specifically for the demands of float sensing, liquid level sensing, and liquid measurement applications in the oil and gas industry ...

Buck controller supports new levels of flexibility for high-current designs

Intersil Corporation (Milpitas, CA) announced the ISL78268 55V synchronous buck controller with 3A integrated high-side and low-side drivers. The most versatile high voltage buck solution available, the ISL78268 buck controller provides very high step-down efficiency....

Enclosures & Backplanes

UV-stable handheld enclosures suit outdoor electronics

Okw Enclosures

OKW (Bridgeville, PA) has launched DATEC-COMPACT, a brand new range of UV-stable IP65 (NEMA 4) handheld enclosures for outdoor electronics. These modern and ergonomic cases are the first from OKW to feature integrated contacts as an option – providing…

2014 IMPACT Award Winner: OKW Enclosures wins for Enclosures

Okw Enclosures

OKWs SOFT-CASE series of hand held enclosures is now available from stock molded in BIOGRADE bioplastic material. For most applications, this bioplastic material can be used instead of the fossil plastics, such as ABS, which were used until now. Features include ...

Handheld enclosures include integrated cable glands

Okw Enclosures

Integrated cable glands are available as standard on OKW’s SMART-CASE range of handheld enclosures. They help to protect the cable as well as further enhance the aesthetics of this popular range. Integrated cable glands can be specified for

ICs

Wide input DC/DC regulators target smart grid and industrial applications

Renesas Technology America, Inc.

Renesas Electronics America (Santa Clara, CA) announced 16-V input capable synchronous buck regulators that deliver up to   continuous current to loads at voltages as low as 0.8 V. The new power supply ICs are appropriate for ...

Pre-driver IC targets automotive high-current DC motor applications

Melexis

Melexis (Nashua, NH) introduces the MLX83100 N-FET pre-driver IC. Offered in a compact 28-pin package, with four digital inputs, this pre-driver IC provides a very flexible, inexpensive and space-saving solution for high current N-FET DC motors. The MLX83100 has the capability to simultaneously drive ...

600V ultra-fast trench IGBTs optimized for welding applications

International Rectifier

International Rectifier (El Segundo, CA) announced the introduction of the IR66xx series of high-performance 600V ultra-fast Trench-gate Field Stop insulated-gate bipolar transistors (IGBTs). The new rugged, reliable family of devices features extremely low conduction....

Optoelectronics & Displays

LED light fixture provides 17,215 lumens of illumination

Larson Electronics Llc

The GAU-48-160W-LED from Larson Electronics (Kemp, TX) is a general-use high bay LED linear integrated light fixture that provides 17,215 lumens of illumination in a 160° wide flood beam spread. This low profile, highly efficient LED light fixture is a direct replacement....

Explosion-proof LED light fixture intended for applications requiring Group B approvals

Larson Electronics Llc

Explosion proof lighting specialists Larson Electronics (Kemp, TX) have announced the release of a Group B approved temporary manhole mount LED light fixture, the MMLP-1MLED-B-24OD-12P, that provides operators with a powerful and highly convenient alternative....

Remote-controlled spotlight mounted atop a 6’ light pole

Larson Electronics Llc

The FPM-72-GLS fixed pole-mounted, remote-control work light from Larson Electronics (Kemp, TX) is designed to provide convenient and secure lighting for operators working from within the utility vehicle or when away from the vehicle. This pole mounted light has a 65 watt remote control light head....

Packaging & Interconnects

LISTED UNDER: Connectors Couplers

Termination is suited to demanding environments

The new AMCOL-1-T medium-power coaxial termination from Link Microtek (Hampshire, UK) is suitable for use in HF and VHF systems that are deployed in demanding environments where ...

Plenum-rated cable features smaller diameter of 0.265 inches

Superior Essex (Atlanta, GA) announces it has decreased the diameter of its 10Gain XP CAT 6A plenum-rated cable to 0.265 inches, making it the smallest Category 6A UTP cable available. The smaller diameter provides an improved cable pathway fill ratio....

Wire-to-board connector system offers wides range of mechanical and electrical options

Molex Incorporated

Molex Incorporated (Lisle, IL) solves common design challenges faced by electronic engineers with its CLIK-Mateä1.50mm Wire-to-Board Connector System, which offers a variety of circuit sizes, mounting styles and wire gauges to meet next-generation power and signal needs....

Passive & Discrete Devices

Thin-film chip resistors offer resistance values from 24.9 ohms to 100K ohms

Stackpole Electronics, Inc.

The RNCF Series thin film chip resistors from Stackpole (Raleigh, NC) offer a wide resistance range in tight tolerance and low TCR precision. Resistance values from 24.9 ohms to 100K ohms are available in the 2010 and 2512 sizes in 0.01% tolerances and +/- 5 ppm TCR....

TVS diode array series combines ESD protection with common-mode EMI filtering

Littelfuse, Inc.

Littelfuse, Inc. (CHICAGO, IL) has introduced the SP5001, SP5002, and SP5003 Series TVS Diode Arrays (SPA Diodes). These highly integrated Common-Mode Filters (CMF) provide both electrostatic discharge (ESD) protection and common-mode EMI filtering....

Chip-current sense resistor features a 1 watt power rating

Koa Speer Electronics, Inc.

KOA Speer Electronics (Bradford, PA) introduces the TLR2BW metal plate chip current sense resistor, featuring a 1 watt power rating in a 1206 chip size, and a low resistance of 1 mΩ ~ 20 mΩ. The metal alloy of the TLR2BW provides superior corrosion and heat resistance....

Power Sources & Signal Conditioning Devices

GaN power amp delivers 16 dB of flat gain

Custom MMIC (Westford, MA) announces the addition of the CMD216, a new 14-18 GHz GaN power amplifier in die form, to their expanding product line. The CMD216 delivers 16 dB of flat gain across the entire 14 to 18 GHz bandwidth, an output 1 dB compression point of +37 dBm ...

Dual-output DC/DC controller operates with 0.25 milliohm sense resistance

Linear Technology Corporation

Linear Technology Corporation (Milpitas, CA) announces the LTC3882, a dual-output multiphase synchronous step-down DC/DC controller with a serial digital interface. The LTC3882 uses leading-edge modulation voltage-mode control for excellent transient response....

Amplifier module draws only 300mA from a +8 to +14.5 volt supply

Rfmw Ltd

RFMW, Ltd. (San Jose, CA) announces design and sales support for P1dB’s P1-AMP00010-1-SMA, a DC to 10 GHz, 1 Watt, amplifier module. The P1-AMP00010-1-SMA is commonly used as a general purpose, broadband amplifier in test and measurement applications....

RF & Microwave/Communications

Crystal comes in ultra-miniature size

CTS Corporation announced the smallest member of its quartz crystal products, Model 402. The product is housed in a 2.0-mm x 1.6-mm seam sealed ceramic four-pad surface mount package – providing …

VCO includes control voltage range of 0.5V~4.5V

Crystek Crystal

Crystek's (Fort Myers, FL) CVCO55FL-0200-0239 VCO (Voltage Controlled Oscillator) operates from 200 MHz to 239 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -123 dBc/Hz @ 10KHz offset and has excellent linearity....

Two-channel DDS function generator features maximum frequency of 50MHz

Saelig Company, Inc.

Saelig Company, Inc. (Fairport, NY) has a launched two-channel version of their TG5011 function/arbitrary/pulse generators. The new TG5012A features a maximum frequency of 50MHz. Both channels provide the full performance and specification, along with entirely independent operation when required....

Sensors & Actuators

LISTED UNDER: Actuators Sensors

Accelerometers designed to measure both vibration and acceleration

Silicon Designs, Inc., (Kirkland, WA) announced the global market introduction of the Model 1410. Model 1410 is a family of digital pulse density output MEMS variable capacitive (VC) accelerometers, designed to reliably measure both vibration and acceleration, with very low power consumption....

Low-power sensor hub designed for smartphones, tablets, wearables, and the Internet of Things

Hillcrest Labs

Hillcrest Labs announced it has designed a new sensor hub product to change how consumers use their smartphones and other portable electronics. Sensor hubs are a separate class of chips designed to offload sensor management from the main processor....

Current-sensor ICs designed for use in low-power applications

Allegro Microsystems, Inc.

Allegro MicroSystems, LLC (Worcester, MA) announces two new current-sensor IC devices that are true ±5 A sensor ICs or uni-directional 10 A sensor ICs for use in low-power applications that require higher output swings at lower current....

Software

LISTED UNDER: Designing Engineering

Software makes significant FPGA design productivity gains

Microsemi Corporation

Microsemi Corporation (Aliso Viejo, CA), a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, today announced the release of its updated Libero System-on-Chip (SoC) version 11.4 comprehensive design software....

Mentor Graphics and Digi-Key bring professional EDA software to the engineering masses

Digi-Key

Digi-Key Corporation has collaborated with Mentor Graphics Corporation to create a unique concept-to-prototype design tool targeted for green-field projects before transition to production. Available from Digi-Key, the Designer Schematic product from Mentor Graphics addresses escalating demand from professional engineers for Electronic Design Automation (EDA) software at an affordable price point for new R&D projects, while facilitating access to the latest parts.

Mentor Graphics and Digi-Key bring professional EDA software to the engineering masses

Mentor Graphics Corporation

Digi-Key Corporation has collaborated with Mentor Graphics Corporation to create a unique concept-to-prototype design tool targeted for green-field projects before transition to production. Available from Digi-Key, the Designer Schematic product from Mentor Graphics addresses escalating demand from professional engineers for Electronic Design Automation (EDA) software at an affordable price point for new R&D projects, while facilitating access to the latest parts.

Test & Measurement

Transmitters and converters provide fast response time and low temperature drift

With selected devices featuring HART 7 technology, the entire 3000 series of compact best-in-class temperature transmitters and converters from PR Electronics (San Diego, CA) provides high accuracy, fast response time, and low temperature drift....

Test probe cable assemblies designed for the inspection of high-frequency circuits

GradConn (Boca Raton, FL) has launched a new range of low-cost co-axial test probe cable assemblies for the inspection of high frequency circuits. Suitable for testing Hirose MS-156 and Murata MM8030 sub miniature coaxial switch connectors ...

Four-slot, rugged CompactDAQ controller integrates an Intel Atom processor and high-accuracy measurements

National Instruments

NI (Austin, TX) announced the CompactDAQ four-slot controller. By integrating the processor, signal conditioning and I/O into a single CompactDAQ system, engineers and scientists can reduce overall system cost and complexity while increasing

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading