Advertisement
Products

Boards & Modules

LISTED UNDER: Boards Kits PCBs Terminals

Wireless power transfer demonstration kit delivers 35 W and Operates at 6.78 MHz

Efficient Power Conversion

Efficient Power Conversion Corporation (El Segundo, CA) announced the immediate availability of a complete demonstration wireless power transfer kit. The system is capable of delivering up to 35 W into a DC load while operating at 6.78 MHz (the lowest ISM band).

Rugged 6U VPX radar solution is SWaP-optimized

Adlink Technology

ADLINK Technology, Inc. (San Jose, CA) announced the VPX6000, a rugged 6U VPX blade featuring a dual processor design based on quad-core 4th generation Intel Core i7-4700EQ processors.

COTS card performs data acquisition, signal processing and storage in XMC form factor

4Dsp, Inc.

4DSP’s (Austin, TX) FM788 FPGA-based COTS card is designed to perform in a variety of applications, including beamforming, direction finding, RADAR, and satellite communications. This XMC module is based on Xilinx’s Virtex-7 and features …

Computer Peripherals & Networking Devices

LISTED UNDER: Computers

ITAR-free OpenVPX rugged mission computer targets compute-intense applications

Curtiss-Wright Controls

Curtiss-Wright Corporation (Ashburn, VA) announced that its Defense Solutions division has introduced a new fully integrated, ITAR-free compact mission computer, the MPMC-9365 Multi-Platform Mission Computer (MPMC). The compact, SWaP-optimized MPMC-9365 supports up to...

COTS card performs data acquisition, signal processing and storage in XMC form factor

4Dsp, Inc.

4DSP’s (Austin, TX) FM788 FPGA-based COTS card is designed to perform in a variety of applications, including beamforming, direction finding, RADAR, and satellite communications. This XMC module is based on Xilinx’s Virtex-7 and features …

Fanless quad-core embedded PC features extended temperature operation

Winsystems

WinSystems (Arlington, TX) is introducing a fanless quad-core Intel AtomE3845 based industrial computer. The SYS-405Q includes USB, dual Ethernet, mini-PCIe and serial ports housed in a rigid aluminum alloy enclosure.

Cooling & Thermal Management

AC & DC axial fans available for harsh environments and IP56 rated

Qualtek Electronics Corp.

Qualtek (Mentor, Ohio) introduces its series of high-performance, low-cost HPLC series, AC and DC axial fans tested to withstand harsh environmental conditions, including dust and water. The axial fan series, with sizes ranging from 172mm to 280mm, have met or exceeds the international standard IEC 60529....

2014 IMPACT Award Winner: JARO Thermal wins for Cooling and Thermal Management

Jaro Thermal

The Three-Phase (wired) “Motor-to-DC”, sensorless, brushless, low-vibrating, high-efficiency, UL/ CUL & CE certified fans from JARO Thermal (Boca Raton, FL) uses significantly less power than most standard, single-phase wired fans. Available with an optional water-protected IP 55 rating ...

Thermal controller designed to operate with thermoelectric modules

Oven Industries, Inc.

Oven Industries’ (Mechanicsburg, PA) Model 5R7-350/347 is an economical thermal controller especially designed to operate with thermoelectric (Peltier effect) modules. Most of these modules may be operated in either a cooling mode or a heating mode depending on current direction....

Electromechanical/Mechanical Devices

Fully integrated 802.11a/n/ac FEM offers 13dB

Rfmw Ltd

RFMW, Ltd. (San Jose, CA) announces design and sales support for a fully integrated 802.11a/n/ac FEM, with bypass LNA + T/R SPDT switch from TriQuint. The TQL1600 incorporates an LNA with high-gain/low gain mode. When gain is required, the FEM offers 13dB....

Fully integrated 802.11a/n/ac FEM offers 13dB

Triquint Semiconductor

RFMW, Ltd. (San Jose, CA) announces design and sales support for a fully integrated 802.11a/n/ac FEM, with bypass LNA + T/R SPDT switch from TriQuint. The TQL1600 incorporates an LNA with high-gain/low gain mode. When gain is required, the FEM offers 13dB....

Two-in-one LED driver features adjustable current and voltage

GlacialPower (Taipei, Taiwan) announced a new dual-mode LED driver powering LED lighting from 7 W to 20 W. Featuring either constant current or constant voltage operation, the LED driver mode and power output can be easily adjusted to fit a variety of lighting and signage applications.

Enclosures & Backplanes

2014 IMPACT Award Winner: OKW Enclosures wins for Enclosures

Okw Enclosures

OKWs SOFT-CASE series of hand held enclosures is now available from stock molded in BIOGRADE bioplastic material. For most applications, this bioplastic material can be used instead of the fossil plastics, such as ABS, which were used until now. Features include ...

Handheld enclosures include integrated cable glands

Okw Enclosures

Integrated cable glands are available as standard on OKW’s SMART-CASE range of handheld enclosures. They help to protect the cable as well as further enhance the aesthetics of this popular range. Integrated cable glands can be specified for

Push button box offers NEMA rating and plastic option for corrosion resistance

Bud Industries, Inc.

Bud Industries (Willoughby, OH) has introduced its PBB Push Button Box, giving customers a low price alternative within its existing line of NEMA plastic enclosures for automation. Plastic push button boxes offer high corrosion resistance in

ICs

DC – 50 GHz LNA offers wideband performance

Custom MMIC (Westford, MA) announced the addition of the CMD206, a DC-50 GHz distributed low noise amplifier in die form, to its product line. Applications for the CMD206 include…

Security MCU offers high RF integration

Texas Instruments

Texas Instruments (Dallas, TX) introduced the RF430F5978 microcontroller (MCU) and accompanying evaluation module (EVM). Building on Tithe company’s CC430 product family, the RF430F5978 MCU is a highly integrated RF solution with desirable read zone and battery performance for…

Forty-Watt radiation-hardened 120-V Input DC/DC converters target satellite power systems

International Rectifier

International Rectifier, IR (El Segundo, CA) announced the introduction of the M3G120 Series of 40-W radiation-hardened (RAD-Hard) 120V input DC/DC converters for a wide range of digital and analog satellite power systems requiring up to 15 years or more of mission life.

Optoelectronics & Displays

LED light draws only 320 watts at 12.53 amps

Larson Electronics Llc

The LED10WSA-320 LED light released by Larson Electronics (Kemp, TX) produces 29,446 lumens of light output while drawing only 320 watts at 12.53 amps from a 12 volt electrical system. These LED lights are ideal replacements for fragile and hit running 400 watt metal halide lamps....

300-watt explosion-proof LED light fixture provides 24,000 lumens

Larson Electronics Llc

The EPL-HB-2X150LED-RT Explosion Proof High Bay light fixture from Larson Electronics (Kemp, TX) provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. LED technology and compact design makes this lamp a replacement upgrade option....

LED replacements for incandescent lamps aim to increase the lamp life by 10 times

VCC (Poway, CA) has enhanced its series of LED replacements for traditional incandescent lamps. Providing a complete drop-in replacement solution, the company’s expanded offering of LED replacement lamps and holders combine simple and fast assembly with…

Packaging & Interconnects

LISTED UNDER: Connectors Couplers

High-speed, backplane connector system is presented as future-proof

Molex Incorporated

Molex (Lisle, IL) announced today its Impel backplane connector system is available for use with the company’s Backplane Pin Map Configurator. This connector solution provides equipment manufacturers with the ability to have systems operate at today’s data-rates and costs, while providing…

Microwave assemblies deliver the lowest insertion loss before and after installation

W.L. Gore & Associates

W. L. Gore & Associates, Inc. (Landenberg, PA) has introduced new GORE-FLIGHT Microwave Assemblies, 6 Series – lightweight cable solutions that deliver the lowest insertion loss before and after installation, ensuring reliable performance for the life of the system....

Ethernet cables provide high data rate in lightweight package for aerospace applications

W.L. Gore & Associates

W. L. Gore & Associates, Inc. (Landenberg, PA) introduces GORE Ethernet Cables to meet the military and civil aerospace markets' emerging need for higher data rate cables in a lightweight, flexible, and routable package. Featuring the unique cable jacket material found in GORE 1394b FireWire Cables ...

Passive & Discrete Devices

TVS diode arrays offer 60 percent lower clamping voltages than alternative technologies

Littelfuse, Inc.

Littelfuse, Inc. (Chicago, IL) has introduced the SPHV (unidirectional) and SPHV-C (bidirectional) Series 200W Discrete TVS Diode Arrays (SPA Diodes) that are designed to protect sensitive equipment from damage due to electrostatic discharge (ESD) and other overvoltage transients far better than earlier technologies....

NTC chip thermistors come in compact sizes with high temperature ratings to +150°C

Ametherm

Ametherm (Carson City, NV) introduced four new series of NTC chip thermistors for high-accuracy temperature measurement. The STC0134-X, STC0138-X, STC0143, and STC0144-X Series devices are available in a variety of compact sizes, while providing…

Multilayer ceramic chip inductors suit telecom, networking, medical, and industrial applications

Pulse Electronics

Pulse Electronics Corporation (San Diego, CA) has extended its inductor product offerings with a new line of high frequency multilayer ceramic chip inductors. These RF ceramic inductors have low DC resistance, high Q values at higher frequencies, high self-resonant frequency, and high reliability.

Power Sources & Signal Conditioning Devices

DC-DC converter provides a full 108W of 12V power

Semiconductor Circuits, Inc.

Semiconductor Circuits, Inc. (Atkinson, NH) introduces the CPE9B36 “Cool Power Technologies” 12V, 9A wide input range 8th brick DC-DC converter. This open frame module provides a full 108W of 12V power @ 55C & 200lfm of airflow – ideal for bus converter or distributed power architecture applications....

Industrial grade filters for AC/DC power supplies are offered in 10-A and 20-A versions

Schaefer Power Inc

Schaefer, Inc. (Hopkinton, MA) has introduced 10-A and 20-A industrial filters for its TER Series of low profile, AC/DC power supplies. The TER-10ASF and TER-20ASF are designed to attenuate high frequency noise on AC lines thereby reducing the level of conducted emissions.

Encapsulated PCB mount AC/DC linear supply offers tight regulation

Calex Mfg. Co., Inc. (Concord, CA) announced the Model 3.15.5-115, a low noise linear power supply which provides outputs of +/-15 VDC at 100 mA and 5 VDC at 500 mA. The 3.15.5-115 is powered by 115 VAC.

RF & Microwave/Communications

VCO operates from 1000 MHz to 2000 MHz

Crystek Crystal

The CVCO55BE-1000-2000 VCO (Voltage Controlled Oscillator) from Crystek (Fort Myers, FL) operates from 1000 MHz to 2000 MHz with a control voltage range of 1.0V~20V. This VCO features a typical phase noise of -95 dBc/Hz @ 10KHz offset and has excellent linearity....

Rotary joints accommodate signal transmission between rotating RF devices

Fairview Microwave, Inc. announced a line of single-channel/single-axis and single-channel/multi-axis RF Rotary Joints. These rotary joints are needed wherever RF signals have to be transmitted between stationary and moving parts of a system.

RF subsystem operates over the E-band frequency spectrum from 71- 86 GHz

Ducommun Technologies, Inc.

DLT (Carson, CA) has announced the release of E-band Radio link RF subsystem. This subsystem operates over the E-band frequency spectrum from 71- 86 GHz. One of its applications can be found in the E-band multi-gigabit wireless communication system, which offers local area networks....

Sensors & Actuators

LISTED UNDER: Actuators Sensors

NTC chip thermistors come in compact sizes with high temperature ratings to +150°C

Ametherm

Ametherm (Carson City, NV) introduced four new series of NTC chip thermistors for high-accuracy temperature measurement. The STC0134-X, STC0138-X, STC0143, and STC0144-X Series devices are available in a variety of compact sizes, while providing…

Image sensor targets traffic, surveillance, medical imaging and industrial inspection

On Semiconductor

ON Semiconductor (Phoenix, AZ) is enhancing its charge-coupled device (CCD) image sensor portfolio with new technology for industrial applications. The new KAI-08051 Image Sensor provides improved light sensitivity, reduced read noise, and improved color accuracy compared to the previous generation...

RFID light detector is battery-free

The SHADOW from Farsens S.L., (San Sebastián, Spain), is a battery free RFID ambient light detector tag. These tags are compatible with commercial EPC C1G2 readers. It features a LPRS N5AC501085 Light Dependent Resistor (LDR) to detect exposure to light or darkness.

Software

LISTED UNDER: Designing Engineering

Mentor Graphics and Digi-Key bring professional EDA software to the engineering masses

Digi-Key

Digi-Key Corporation has collaborated with Mentor Graphics Corporation to create a unique concept-to-prototype design tool targeted for green-field projects before transition to production. Available from Digi-Key, the Designer Schematic product from Mentor Graphics addresses escalating demand from professional engineers for Electronic Design Automation (EDA) software at an affordable price point for new R&D projects, while facilitating access to the latest parts.

Mentor Graphics and Digi-Key bring professional EDA software to the engineering masses

Mentor Graphics Corporation

Digi-Key Corporation has collaborated with Mentor Graphics Corporation to create a unique concept-to-prototype design tool targeted for green-field projects before transition to production. Available from Digi-Key, the Designer Schematic product from Mentor Graphics addresses escalating demand from professional engineers for Electronic Design Automation (EDA) software at an affordable price point for new R&D projects, while facilitating access to the latest parts.

Fully integrated hardware/software platform designed for for THz materials characterization

Lake Shore Cryotronics

Lake Shore’s (Westerville, OH) new 8500 Series THz system is a fully integrated hardware/software platform for characterization of electronic, magnetic and chemical materials. The system uses non-contact THz-frequency energy and an integrated low-temperature, high-field cryostat....

Test & Measurement

Eight-channel Type K thermocouple amplifier signal conditioner suits industrial applications

The Sensor Connection (Troy, MI) has expanded its line of measurement and control instrumentation with the addition of the model TCA-MS-K-8-A4.  This eight-channel Type K Thermocouple Amplifier Module converts the low output voltage signal from 8 Type K thermocouple probes to eight…

Test solution designed for characterizing USB 3.1 receivers

Agilent Technologies

Agilent Technologies (Santa Clara, CA) announced an accurate test solution for characterizing USB 3.1 receivers. Using the Agilent USB 3.1 receiver test set, design and test engineers in the semiconductor and computer industry can now accurately characterize and verify USB 3.1 receiver ports in ASICs and chipsets....

Data loggers features wireless two-way communication with pulse input

Omega Engineering

Omega’s (Stamford, CT) new series of wireless pulse data loggers features wireless two-way communication with pulse input for monitoring wind speed, energy or flow rate. The data logger has a digital display that shows data in real time, a battery life indicator and audible and LED alarm indicators.

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading