Product Releases
Advertisement

Chip Filters Intended for Cellular Band Applications

Thu, 12/16/2010 - 7:59am

Chip FiltersTaiyo Yuden’s latest lines of chip filters optimize the performance, while minimizing the size, of mobile phones. The exceptionally compact EIA 0603 size multilayer dual low pass filter is designed for use with multi-band smartphones, while two new optimized EIA 0805 size multilayer diplexers were developed for use with mobile phones. Taiyo Yuden chip filters for the cellular band field are based on the company’s experience with and development of multilayer filters and chip antennas for non-cellular band applications, such as wireless LAN, Bluetooth and GPS.

One of the smallest chip filters in its class, the EIA 0603 size dual low pass filter FI168D087018 measures just 1.6mm x 0.8mm with a maximum height of 0.45mm. To ensure a wide coverage area without service disruption, today’s multi-band handsets are designed for use at multiple frequency ranges. In the past, mobile phones have required a low pass filter for each frequency band to prevent disruption occurring due to busy frequency bands. With the introduction of Taiyo Yuden’s FI168D087018, two differing frequency band low pass filters (the GSM telecommunication standard low band and a high band) are successfully combined into a single part. This reduction in parts and surface mount area contribute to a smaller overall device size. Smartphones equipped with dual low pass filter technology meet the wireless communication standards that are required to achieve high-speed data transmission.

Taiyo Yuden’s new EIA 0805 size FI212P089208 and FI212P089213 (2.0 x 1.25 x 0.90mm each) multilayer diplexers are optimized for the RF send/receive systems of multi-band mobile phones. To meet the growing demand for multiple frequency band support, a multi-antenna method is often utilized. Two antennas for different frequency bands are used for sending and receiving RF signals, with a diplexer that performs the required multiplexing and demultiplexing operations. This often results in a higher component count and increased mounting space requirements. However, employing their component design technology, multilayer ceramic technology, high frequency component materials and simulation technology, Taiyo Yuden produces compact multilayer diplexers that drastically reduce the required space for a multi-antenna system. Custom solutions are also available to meet customer specific demands.

The acquisition of Fujitsu Media Devices Limited by Taiyo Yuden has increased the company’s offering to include both the FI212P089208 and the FI212P089213, as well as other high-frequency components for cellular band applications.
The dual low pass filter FI168D087018 sample price is $0.50/unit.

The multilayer diplexers FI212P089208 and FI212P089213 sample price is $0.50/unit.

Dual low pass filter FI168D087018 pass band frequencies:

Ordering Code

Frequency Band

Pass Band Frequency

Application

FI168D087018

Low band

824 to 915MHz

GSM850, GSM900

High band

1710 to 1910MHz

DCS, PCS

Multilayer diplexers FI212P089208 and FI212P089213 pass band frequencies*:


Ordering Code

Frequency Band

Pass Band Frequency

Application

FI212P089208
FI212P089213

Low band

824 to 960MHz

GSM 850, GSM900, CDMA2000

High band

1710 to 2170MHz

DCS, PCS, W-CDMA, AWS

Topics

Advertisement

Share this Story

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading