Gigabit Ethernet Module

May 2, 2013

Gigabit Ethernet Interface Module for IEEE 802.3ab single-port applications. Has autotransformer for enhanced EMI performance.

Gigabit Ethernet Module

May 2, 2013

Gigabit Ethernet interface module for single-port IEEE 802.3ab applications. Operating temperature 0 - 70C. 1500 Vrms isolation.

Gigabit Ethernet Module

May 2, 2013

1000BaseT interface module takes little board space. Smallest single-channel interface module available. Connected between the Ethernet cable and interface chip, module eliminates noise from the signal. RoHS: Lead-Free. PCA P/N: EPG4033JE-LF

Photoflash Flyback Transformers

April 25, 2013

Transformer series designed for use in power supplies built for photo flash tubes. May be used with Linear Tech. LT3420 and other SMPS power supply chips.

Low Profile Gate Drive Transformer

April 25, 2013

Low profile transformer operates above 50 KHz. Used to drive MOSFET gates in SMPS power supplies. EPA4271GE-LF

RS-485/RS232 Low Profile Driver Transformer

April 25, 2013

Low profile package design. Designed for use with Maxim MAX 253 or 845, isolated RS-485/RS-232 data interface devices. Power up to 1 watt. Uses UL1446 Class H (Class 180) insulation system. Package is UL 94-V0. Operating temperature -40 to +85C.

10/100Base-TX Filter for NIC/Switch Applications

April 24, 2013

Ethernet Filter for NIC/Hub/Switch applications. Small package for mounting behind RJ-45 connector. Transfer-molded.

Power over Ethernet Flyback Transformers

April 24, 2013

Designed for Power over Ethernet applications using SMPS DC-DC converters. Built with UL recognized 94V0 materials and UL 1446 Class B insulation system. Operating temperature -40 to +85C.

Flyback Transformer for High Power PoE Applications

April 24, 2013

Flyback transformer designed for use with Linear Tech. LTC4278 converter provides 25 Watts for Power over Ethernet applications. Uses UL recognized 94-V0 materials. Operating temperature 0 to 70C. Class 130C insulation system.

RS-485/RS-232 Driver Transformer

April 24, 2013

Designed for use with Maxim MAX 253 or 845, isolated RS-485/RS-232 data interface devices. Power up to 1 watt. Uses UL1446 Class H (Class 180) insulation system. Package is UL 94-V0. Operating temperature -40 to +85C.

PWM Power Controller

April 23, 2013

Pulse Width Modulated power controller is useful as a lamp dimmer. Voltage range: 5 to 15 VDC. 7.0 Amps maximum load. Duty cycle from 1 - 99% in 3 wire configuration, 1 - 98% in 2 wire configuration. Works with both incandescent and led lamps. Will operate as a motor controller with addition of a diode. Smallest package available. Will fit in the same space as an on/off switch. Package size: .535 x .525 x .450".

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading