Advertisement
Product Releases
Subscribe to ECN Magazine Product Releases
View Sample

FREE Email Newsletter

ECN Daily

Camera flash LED driver delivers up to 1.2A

September 2, 2014 1:42 pm | Micrel | Comments

Micrel, Inc. (San Jose, CA) introduced the MIC2873/MIC2874, an ultra-compact, camera flash LED driver that integrates a 1.2A boost converter and LED driver circuit into a small 9 pin, 1.3mm by 1.3mm chip scale package. Operating from 2.7V to 5.5V and featuring up to 92 percent efficiency ...

TOPICS:

Battery analyzers simplify the testing of mission critical battery backup systems

September 2, 2014 1:21 pm | Fluke Corporation | Comments

The new 500 Series Battery Analyzers from Fluke (Everett, WA) simplify the workflow of testing stationary batteries and battery banks through an intuitive user interface that provides quick, guided test setups ensuring technicians are capturing the correct data....

TOPICS:

Thin film chip resistors address precision resistor requirements of automotive applications

August 28, 2014 4:40 pm | Nic Components | Comments

The NTRA series of automotive-grade thin-film chip resistors from NIC Components addresses precision resistor requirements of automotive applications. The NTRA series products are AEC Q-200 qualified and supported from TS-16494 certified ...

TOPICS:
Advertisement

Dual low-side driver IC designed for SMPS applications

August 28, 2014 4:15 pm | International Rectifier | Comments

International Rectifier (El Segundo, CA) introduced the automotive-qualified AUIRB24427S high-current dual low-side driver IC for Switched Mode Power Supply (SMPS) applications used in Hybrid Electrical Vehicles (HEV), Electric Vehicles (EV) ...

TOPICS:

System-on-a-chip supports vehicle-to-vehicle technology

August 28, 2014 4:02 pm | Renesas | Comments

Renesas Electronics Corporation (Santa Clara, CA) announced the availability of its R-Car V2H, the company’s newest system-on-a-chip (SoC) implementing state-of-the-art image recognition technology to support high-resolution surround viewing in advanced driver assistance systems....

TOPICS:

VCO operates at 1680 MHz

August 28, 2014 3:03 pm | Comments

Crystek’s (Fort Myers, FL) CVCO55CC-1680-1680 VCO (Voltage Controlled Oscillator) operates at 1680 MHz with a control voltage range of 0.5 V to 4.5 V. This VCO features a typical phase noise of -117 dBc/Hz at 10 kHz offset and has desirable linearity....

TOPICS:

Ethernet I/O module features 4 analog outputs, 5 digital inputs, and 5 digital outputs

August 28, 2014 2:41 pm | Comments

ICP DAS USA, Inc. (Lomita, CA) introduces ET-7024, a multifunctional Ethernet I/O module with 4 analog outputs, 5 digital inputs, and 5 digital outputs. Each analog output can be configurable to put out current or voltage. It supports a variety of selectable analog output types....

TOPICS:

LED power supply offers optional dimming

August 28, 2014 11:52 am | Comments

Stadium Power has launched a range of LED drivers for indoor and outdoor use in LED-based lighting and signage applications. The new range includes the LDP Series, offering 24-, 36- and 48-V constant current outputs over …

TOPICS:
Advertisement

Current sensor IC is designed with differential output and externally adjustable gain

August 28, 2014 11:30 am | Comments

Allegro MicroSystems, LLC (Worcester, MA) introduced a new current sensor IC for industrial, commercial, and communications systems. Allegro’s ACS726 is said to be the first current sensor IC to include a ...

TOPICS:

Inclinometers include Modbus RTU interface

August 28, 2014 10:41 am | Fraba / Posital | Comments

POSITAL (Hamilton, NJ) has added support for the Modbus RTU communications protocols to its TILTIX family of inclinometers (tilt sensors). The new Modbus RTU models, like other TILTIX inclinometers based on micro-electronic mechanical systems MEMS technology, are ...

TOPICS:

RFID multiple switch monitor tag is battery free

August 28, 2014 10:10 am | Comments

The X32 from Farsens S.L. (San Sebastián, Spain) is a battery free RFID switch monitor tag capable of transmitting a unique identifier and the status of up to 32 switches to a commercial EPC C1G2 reader without the need of a battery on the sensor tag.

TOPICS:

Entry level DSO offers several measurement functions with 100 MHz bandwidth and 1 GSa/s

August 28, 2014 9:09 am | B&K Precision Corporation | Comments

B&K Precision (Yorba Linda, CA) introduced its 2190D bench digital storage oscilloscope (DSO). This compact dual-channel DSO offers several measurement functions with 100 MHz bandwidth and 1 GSa/s sampling rate.

TOPICS:

40-nm MCUs target HEV/EV motor control applications

August 28, 2014 9:03 am | Renesas Technology America, Inc. | Comments

Renesas Electronics Corporation (Santa Clara, CA) announced the new RH850/C1x Series of 32-bit microcontrollers (MCUs), designed for motor control in hybrid electric vehicles (HEVs) and electric vehicles (EVs). Based on the…

TOPICS:
Advertisement

Chassis and modules are compliant to MicroTCA.1 spec for air-cooled rugged applications

August 28, 2014 8:58 am | Vadatech, Inc. | Comments

VadaTech (Henderson, NV) offers chassis and modules that are compliant to the MicroTCA.1 specification for air-cooled rugged applications. The MicroTCA.1 specification uses ...

TOPICS:

Crimp style, wire-to-board, subminiature connector targets LED applications

August 27, 2014 4:49 pm | Jst Corporation | Comments

The new LEN Series wire-to-board, crimp style, disconnectable connectors recently introduced by JST Corporation (Waukegan, Il) offer subminiature size, design flexibility, and reliable contact construction for high density LED light applications.

TOPICS:

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading