Advertisement
Product Releases
Subscribe to ECN Magazine Product Releases

Next Generation Software for Cable Test System

May 22, 2007 5:48 am | Comments

A software upgrade has been released by CAMI Research for the CableEye cable and wire harness tester. The new software displays multiple, independent connector graphics with live video graphics to help easily visualize complex wiring. Users may drag connector images to the desired position on the left or

Nineteen I/O Modules and Datalogging Software Added to Data Acquisition Platform

May 22, 2007 5:45 am | Comments

National Instruments nearly tripled the number of I/O modules available for NI CompactDAQ, adding several key measurements and capabilities to the USB-based modular data acquisition system. Additionally, every CompactDAQ chassis is shipped with the company’s LabVIEW SignalExpress data-logging software

Signal Source Analyzer with 10X Throughput Over Its Predecessor

May 22, 2007 5:43 am | Keysight Technologies | Comments

Agilent Technologies introduced an enhanced model of what is said to be the world's fastest signal source analyzer, the Agilent E5052A. It features a tenfold improvement in measurement throughput and more precise analysis functions than its predecessor, as well as desirable performance in clock jitter measurement with a very low jitter noise floor

Advertisement

System Monitor Eyes “Feel-good Data”

May 22, 2007 5:41 am | Comments

The new system monitor from Elma monitors and controls power supply voltages, temperatures and fan speed values. After the associated Eurocard (3U, 100 mm × 160 mm) has been integrated in the system, it can be accessed from anywhere in the world via the Internet and instructed to carry out commands. Owing to its platform independence, the unit can monitor VME, VME64x and CompactPCI. As it is designed as an open system, users can

Interconnect Provides Vertical PCB Connections with Laminations Instead of Plated-Thru-Holes

May 22, 2007 5:35 am | Comments

Endicott Interconnect Technologies announced HPC-Z interconnections which provide signal connections only where desired, with functional isolation for single or double side surface mount partitions. The HPC-Z interconnect solves thick board drilling and wire density problems, and meets the need for functional isolation, with

LED Panel Mount Indicators

May 21, 2007 6:42 am | Comments

Dialight Corporation expanded its line of LED panel mount indicators with the addition of its 612 and 616 series for easy front panel mounting in 12 mm (0.492") and 16 mm (0.642") holes and panel thicknesses of up to 6.3 mm (0.236"). The RoHS-compliant indicators are designed for a variety of applications, including main/remote power indication, status indication, maintenance/warning indication and

“Sunlight-Readable” LCD Modules for Industrial Applications Used in High-Ambient-Light Environments

May 21, 2007 5:34 am | Comments

NEC Electronics America, Inc. introduced four amorphous-silicon thin-film-transistor (TFT) liquid crystal display (LCD) modules featuring the company’s super-transmissive natural light TFT (ST-NLT) technology. The products include two

Reflective Sheets to Improve Clarity and Efficiency of Lighting Fixtures

May 21, 2007 5:15 am | Comments

Furukawa America Inc. announced microcellular PET reflective sheet that was first deployed in backlight systems for LCD TV and fluorescent illuminated signboards to produce brighter, clearer images. The white MCPET sheets reflect blue light with wavelengths of 400 nm and red light with wavelengths of 700 nm

Advertisement

Modbus TCP Compatible I/O Cubes

May 17, 2007 12:22 pm | Comments

United Electronic Industries (UEI) has announced its UEIModbus Cube, a compact Ethernet-based data acquisition and control interface that communicates with a host computer or PLC over Modbus TCP. The cube functions as a Modbus slave that is easily accessed by any software client acting as a Modbus master. HMI software supports the Modbus protocol. The UEIModbus 600 cube is 4" × 4" × 5.8", and it supports

Silicon CMOS Switch Matrix for LNB with Tone/Voltage Decoder

May 17, 2007 10:17 am | Comments

Skyworks Solutions, Inc. announced a 4 x 2 switch matrix combining a digital decoder with the RF switching network and tone/voltage detect designed for European- and Asian-market applications including Direct Broadcast Satellite (DBS) Low Noise Block (LNB) – the SKY13292-365LF. DBS is a service that allows

Miniature Absolute Magnetic Shaft Encoder

May 17, 2007 6:00 am | Comments

The MA3 from US Digital is a miniature absolute magnetic shaft encoder that provides shaft position information over 360° of rotation with no stops or gaps. The encoder is available in two output versions, analog and pulse width modulation (PWM). The analog version outputs a voltage that is proportional to the absolute shaft position. PWM output is available in 10-bit (1024 positions) and 12-bit (4096 positions) resolutions and

Sensors for Part Inspection

May 16, 2007 12:47 pm | Comments

Cognex Corporation announced the next-generation of its Checker inspection sensors. The Checker 200 series  inspection sensors offer built-in lighting, variable working distance, and high-speed inspection capability at rates faster than 6000 parts per minute. Even on the fastest production lines, Checker can inspect multiple part features and deliver reliable, precisely timed, pass/fail results

Metal Oxide Resistors Rated up to 240°C

May 16, 2007 5:29 am | Comments

TT electronics IRC Wire and Film Technologies Division introduced the CMO Series resistors  available in both standard and miniature sizes, with power ratings from 0.25W to 9W at 70°C, and a maximum operating temperature of 240°C. Supplied with a  flame retardant coating, the resistors are

Advertisement

5.5V Coin Cell Supercapacitors

May 16, 2007 5:04 am | Comments

The Cooper PowerStor  KR series coin cell from Cooper Bussman offers high capacitance in industry-standard horizontal, vertical and cylindrical package styles. Parts are available in six capacitance values from 0.1F to 1.5F with a working voltage of 5.5V and a surge voltage capability of

EDGE Power Amp Module for 3G Phones, PDAs, and Wireless PC Cards

May 15, 2007 6:33 am | Comments

ANADIGICS, Inc. introduced a quad-band Linear EDGE (Enhanced Data rate for GSM Evolution) power amplifier module for 2.75G and 3G cell phones, PDAs, and wireless PC cards that use the globally-accepted GSM/EDGE cellular standard.  The AWT6172 supports operation in the GSM850, GSM900, DCS, and PCS bands, and it delivers efficiencies of up to 55 percent in GMSK mode for longer talk-time, with a linearity of

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading