Advertisement
Product Releases
Subscribe to ECN Magazine Product Releases

Generator Offers 10 nS Resolution

September 5, 2008 10:27 am | Comments

Operating on 8 channels of delay and width, Berkeley Nucleonics Corporation’s Model 505 pulse and digital delay generator displays 10 nS edge resolution on all 16 edges. The entry-level device targets users who need multiple

Fastener Thread Adds 30° Wedge Ramp

September 5, 2008 9:04 am | Comments

Mating with standard 60° male fasteners, Spiralock Corporation’s Spiralock self-locking fastener thread offers a 30° wedge ramp at the root of the female thread to allow spinning relative to female threads until tension is created in the male fastener. The crests of the standard male thread form are drawn against the wedge ramp to reduce

Voltage Supervisors Use 160 nA

September 5, 2008 5:27 am | Comments

Running on a supply current from 1.8 V to 5 V, Intersil’s ISL88001/2/3 3-lead voltage supervisors consume 160 nA of power on a 1.8 V supply current. The SC-70- or SOT-23 packaged devices offer a voltage threshold accuracy of ±1.2% for reset assertion and precision monitoring, a 200 ms power-in reset timeout function and 54 potential

Advertisement

Digital Front End Delivers 1,450-W Peak Output

September 4, 2008 12:55 pm | Comments

Addressing the demand for low-profile configurable power solutions for broadcast, instrumentation, medical equipment, ATE, and other demanding applications, the NV-Power family of AC/DC digital front-end supplies can deliver a 1,450-W peak output for as much as 10 seconds.

TOPICS:

Enclosure Targets Radios

September 4, 2008 10:36 am | Comments

Using a universal mounting system with tamper-proof plugs and feed-throughs, ARC Wireless Solutions’ ARC IES Generation II (Gen II) enclosure performs in radios using broadband Wi-Fi, WiMAX and MIMO. The RoHS-compliant device demonstrates compatibility with many of ARC Wireless’ dual polarization, embedded, bolt-on

IC Employs Timing Generators for SETS Apps

September 4, 2008 9:19 am | Comments

Providing hitless reference and master/slave switching support with a SyncLink cross-couple data link, Connor-Winfield’s STC5230 synchronous clock IC uses 2 independent timing generators, T0 and T4, that include a digital phase-locked loop (DPLL) in Freerun, Synchronized, and Holdover modes with programmable loop bandwidth of each DPLL from 90 mHz to 107 Hz. The ITU-G.813- and Telcordia GR1244 and

Dual Band Antennas Handle 50 W

September 4, 2008 7:44 am | Comments

Utilizing a RG58 cable with a U/V stable polypropylene radome and 3M VHB Series 2-sided adhesive gasket, Astron Wireless Technologies’ LP8319H, LP8615H, LP8619H, LP9119H and LP9219H dual band antennas present a power handling capability of 50 W. The 4.50” OD × 1.06” H devices offer vertical polarization with a

Foot Switch Eliminates Stress

September 4, 2008 5:19 am | Comments

Having a cast aluminum cover, Linemaster Switch’s Linemaster Junior foot switch is said to eliminate lower leg stress and pain after many hours of usage while standing or sitting. The device is suitable for applications including communication equipment, conveyors, terminal application equipment, computer software programs and

Advertisement

MCU Yields Low Current Consumption

September 3, 2008 11:35 am | Comments

Running off of a 32 kHz oscillator, Freescale Semiconductor’s MC9S08QE32 8-bit MCU demonstrates current consumption of less than 7.3 mA on an operating voltage range from 1.8 V to 3.6 V. The device exhibits 2 low-power stop modes, low-power run and wait modes, clock gating registers to disable clocks or unused peripherals and

Air Flow Sensors Utilize Digital Display

September 3, 2008 9:49 am | Comments

Verifying flow rate, direction and output condition, Panasonic Electric Works’ FM-200 Series SUNX air flow sensors integrates a two-color dual digital display to show this data. The devices offer bi-directional flow detection of

Transformers Perform in Harsh Environments

September 3, 2008 7:51 am | Comments

Meeting international specifications for harsh environments, Datatronics’ 4283-1200 and 4283-1250 Series transformers operate in line and portable medical devices, such as defibrillators, industrial lasers, ion generators for powder coating and painting equipment, cathode ray tube transformers and traveling wave tube transformers. The flyback

TOPICS:

Video Capture Card Targets Surveillance Systems

September 3, 2008 5:12 am | Comments

Storing multiple input video feeds for later review and analysis, BVM Limited’s MP-6010 mini-PCI and PCI video capture card works in security and surveillance video systems. The component offers 4-channel video and audio inputs with independently-configurable compression parameters, a single video and audio output channel, and programmable

VCO Presents Low Phase Noise

September 2, 2008 11:22 am | Comments

Running in frequency ranges from 200 MHz to 239 MHz, Crystek’s CVCO55FL-0200-2039 VCO exhibits a typical phase noise of -123 dBC/Hz at 10 KHz offset. The 0.5” × 0.5” SMT-packaged component offers typical output power of 9 dBm, input voltage of 5 V and a control voltage range from 0.5 V to 4.5 V. The oscillator

Advertisement

Backplane Uses Star Routing Topology

September 2, 2008 9:32 am | Comments

Complying with VITA 41.0 specifications and the VITA 38 specification for system management, Elma Bustronic’s 8-slot VXS backplane utilizes a Star routing topology and backplane simulation for signal performance. The 6U-high device includes

Load Switches Demonstrate Voltage Protection

September 2, 2008 6:34 am | Fairchild Semiconductor | Comments

Operating with an input voltage range from 1.8 V to 5.5 V, Fairchild Semiconductor’s FPF22xx Series IntelliMAX load switches include undervoltage lockout (UVLO), thermal shutdown and current limiting. The J-STD-020- and RoHS-compliant components offer

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading