Advertisement
Product Releases
Subscribe to ECN Magazine Product Releases

Isolator Bases Protect 1,500 V

August 15, 2008 8:02 am | Comments

Targeting accelerometers, Wilcoxon Research's SF21, SF22, SF23 and SF24 isolater bases protect a vibration sensor from up to 1,500 V for as long as one minute and withstand temperatures up to 120ºC. The SF21 and SF22 are both 1" (25 mm) across the flats with a 0.820" (20-mm) mounting pad that can accommodate up to

Relay Yields 5 A Current

August 15, 2008 5:04 am | Comments

Measuring 0.62” × 0.43” × 0.44”, Hasco Components International’s SPDT Hasco relay switches a current of 5 A with a less expensive 2-A option. The device exhibits a coil voltage range from 3 to 48 VDC with a sensitive version for drawing less current. The relay offers a maximum switching voltage of 60 VDC or 120 VAC and switching

Power Amplifier Targets Mobile WiMax Applications

August 14, 2008 11:52 am | Comments

Having IEEE 802.16e and WiMAX Forum specification, SiGe Semiconductor’s SE7262L 2.5-GHz power amplifier targets battery-powered applications, including USB accessories, PC cards and embedded cards for laptop computers, for mobile WiMax. The 4 × 4 × 0.9-mm device delivers more than 20% efficiency at output

Advertisement

Baffle/Filler Boards Redirect Airflow

August 14, 2008 9:08 am | Comments

Fitting into empty slots in MicroTCA chassis, Elma Electronic’s AMC air baffle and filler boards redirect or contain airflow to keep the cool air within critical parts of the enclosure to improve overall thermal performance. The devices prevent open slots and help protect the chassis from outside elements, such as dust. The components

Timing Platform Integrates PTP and SETS Device

August 14, 2008 7:35 am | Comments

Semtech’s ToPSync (Timing Over Packet Synchronization) ACS9510 device combines IEEE1588v2 precision time protocol (PTP) with the SONET/SDH synchronous equipment timing source (SETS) solution. The device enables IP networks to provide time alignment between base station nodes or network switches and facilitates the move from traditional leased lines to the use of public IP networks to provide the

Vibration Switches Offers USB Programmability

August 14, 2008 5:18 am | Comments

Offering designs for 24/7 continuous protection, IMI Sensors’ Series 686B USB-programmable smart vibration switches have a remote reset capability and USB-programmable delays to avoid false trips. The hermetically-sealed devices require two wires and can replace legacy switches for additional cable runs. The switches perform in

DC/DC Converters Exhibit 2,250 VDC Isolation

August 13, 2008 12:41 pm | Murata Power Solutions Inc. | Comments

Presenting isolation to 2,250 VDC, Murata Power Solutions’ UCE Series eighth-brick DC/DC converters deliver output power up to 100 W and output current of 40 A over output voltages from 1.50 to 12 V. The 58.40 × 22.90 × 10.16-mm

Security Dongle Interfaces With Any USB

August 13, 2008 9:08 am | Comments

Including a hard-coded FTDIChip-ID number burnt in, Future Technology Devices' USB-Key security dongle performs with any USB host or hub to deliver application software access control or as part of a key-based physical access control. The USB 1.1 and USB 2.0-specified device implements encryption techniques such as

Advertisement

SMT Crystals Boast Smallest Package Available

August 13, 2008 4:20 am | Comments

With package dimensions of 2.0 x 1.6 x 0.5 mm, the R2016 Series of SMT crystal oscillators from Raltron Electronics are presented as the smallest devices of their type. Targeting small wireless and portable-device applications, the crystal is available in a fundamental frequency range from 20.000 to 80.000 MHz

Tactile Switches Come on Tape and Reel

August 12, 2008 10:53 am | Comments

Measuring 6 × 3.5 mm in actuator lengths of 4.3 or 5 mm, CIT Relay & Switch’s CL1101 Series of SMT tactile switches have availability on a tape and reel in 1,500 pieces. The devices exhibit a tested electrical life of 100,000 cycles with an electrical rating of 50 mA at 48 VDC and dielectric strength of 1000 Vrms minimum

TOPICS:

Cases Offer Different Operating Options

August 12, 2008 5:50 am | Comments

Coming in heights of 1U, 2U or 3U and depths of 203, 330 and 457 mm, Hammond Electronics’ RM family of aluminum rack cases operate while mounted in a 19” rack or as a desktop enclosure. The units consist of an extruded

Storage Controller Offers Sustained Recording and Playback

August 11, 2008 12:32 pm | Comments

Using a data interface system for the PCI Express bus, Conduant’s StreamStor Amazon Express storage controller exhibits more than 7 hours of sustained recording and playback performance at 600 MB/s. The full-sized PCI Express card installs into any PC with open PCI Express slots and supports up to 16 SerialATA disk

Convection-Cooled Supplies Deliver 100 W

August 11, 2008 5:42 am | Comments

Having a convection-cooled operating temperature range from -25°C to ~50°C, PowerGate’s TRACOPOWER TOP-100 Series of open-frame power supplies deliver 100 W of power in industrial, consumer market and

Advertisement

Analysis Tool Shows Real-Time Behavior

August 8, 2008 7:59 am | Comments

Operating with ThreadX RTOS, Express Logic’s TraceX V3.1 embedded development analysis tool collects a database of system and application “events” on the target system including thread context switches, preemptions, suspensions, terminations and system interrupts. Events are logged in the database by ThreadX

Tantalum Caps Handle Military Apps

August 8, 2008 6:39 am | Comments

Targeting Mil/Aero and other hi-rel applications, Vishay's Tantamount Hi-Rel COTS T97 Series of solid tantalum chip capacitors are presented as the first of their kind with a 63-V rating and a capacitance of 22µF in the "F" case size. The part addresses the long-standing issue of derating, allowing designers to incorporate solid surface-mount tantalum capacitors into their hi-rel +28-V power supply designs.

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading