Product Releases
NAND/NOR Flash Programming System
August 2, 2007 7:04 am | CommentsBPM Microsystem’s Flashstream offers flash programming of NAND and NOR flash memory at speeds as low as 2.5 percent over the theoretical programming minimum. The company’s Vector Engine uses a proprietary co-processor design to hardware accelerate flash memory waveforms during the programming cycle. Faster speeds are achieved through synchronous operations that eliminate the dead times when the DUT waits on the programmer. The result is
Hybrid Power Switch Offers Power Switching at High Amperages and High Ambient Temperatures
August 2, 2007 7:00 am | CommentsWatlow’s patent pending E-SAFE II hybrid power switch provides reliable and accurate power switching for the foodservice industry. The E-SAFE II is fully RoHS compliant by design and mercury-free. It offers a switching life of millions of cycles at 35A at a high ambient temperature rating of 70°C (158°F) in applications such as conveyor and convection ovens, grills and fryers. The inherent fast cycle time provides a complimentary product for time proportioning PID controllers. Patent-pending NO-ARC technology allows it to switch millions of cycles while decreasing noise and increasing temperature accuracy
Universal Linear Replacement Adapter Line Meets CEC Requirements
August 2, 2007 6:55 am | Phihong | CommentsPhihong has developed a series of replacement products for non-compliant linear adapters. Designated the PLA Series, the universal input California Energy Commission (CEC)-compliant products are said to be very close in cost to linear adapters while meeting the latest energy regulations. The adapter uses one primary control circuit, and the devices are available as fixed wall plugs (1.3W, 2W, 3W, 5W). Features include high efficiency, double insulation and short circuit protection with auto recovery. The devices have a
DC/DC Module is Environmentally Friendly
August 2, 2007 6:51 am | Ericsson Power Modules | CommentsEricsson Power Modules’ PKR-PI is aimed at customers who do not require SMT modules and prefer conventional, through-hole assembly methods and the deployment of pinned modules. The product is suitable for a range of applications such as ICT (information and communication technology), industry, transportation, process control and others. Based on an optimized platform that reduces environmental impact, simplifies the manufacturing process and reduces costs, the PKR-PI is
DC/DC Converter Helps Reduce Global Energy Consumption
August 2, 2007 6:40 am | Ericsson Power Modules | CommentsEricsson Power Modules introduced three PKD-E products: the PKD4218LE SI providing 1.2V at 20A, the PKD4218HE SI providing 1.5V at 14A, and the 3.3V at 15A-rated PKD4510E SI. The products are aimed at existing PKD customers seeking cost-optimization programs, low building height applications requiring surface-mount DC/DC modules and a wide range of applications -- such as process control -- that use 48V distributed power architectures.
Web Camera Processor for Web 2.0 Applications
August 2, 2007 6:40 am | CommentsVimicro launched its VC0336 web camera processor, targeting attachable web cameras and laptop-embedded cameras. The device offers an array of functions for enhancing web camera multimedia experiences such as HD (high definition) video recording, audio recording, auto focus and audio noise cancellation. This web camera processor is said to enhance the experience of Internet users in the era of Web 2.0, allowing the everyday Internet user to create and share video content freely and conveniently. The VC0336 provides
CEC/Green Power Compliant, 24-48W Desktop Power Supplies
August 2, 2007 6:35 am | CommentsAPS released its APS42EG Series of Desktop Switching Power supplies offering 24W to 48W of Power and measuring 4.33" × 2.28" × 1.27". These external/desktop power supplies are appropriate for applications in any mobile electronic application and feature Universal AC Input with single outputs ranging from 12V to 24V DC. They consume >0.256W of input power under no load conditions to comply with CEC/Green Power initiatives. Other standard features including two- and three-prong AC inlet options; over-voltage protection; over-current protection;
Efficient, 4:1 Wide Input, 100W Quarter-brick DC/DC Converters
August 2, 2007 6:30 am | CommentsC&D Technology’s UQQ family of converters with a wide 4:1 input range is suited for industrial, medical and telecom applications and is capable of supplying up to 100W of usable power. Available models are 3.3V/25A, 5V/20A, 12V/8A, 15V/7A and 4V/4A with basic grade I/O isolation voltage of 2,250V. With an overall height of 0.43" the UQQs readily install on PCBs with half-inch card spacing. Input ranges are 9V to 36V (12V and 24 Vin nominal) and 18V to 75V DC (24V and/or 48 Vin nominal
AC/DC SMPS Series Provides 160W Output
August 2, 2007 6:15 am | CommentsDigital Power’s HD160 Series of high-density AC/DC switch-mode power supplies delivers up to 160W, approximately twice the power currently available in the industry standard 2" × 4" footprint, according to the company. These supplies are suited for low profile/1U high applications with a height of 1.06". The HD160 Series
AC/DC Power Modules Offer Ready-to-Use Power Conversion to 5W
August 2, 2007 6:11 am | CommentsSynergistic Technology Solutions (STS) introduced a family of board mount AC/DC converter that provides regulated and fault-protected power up to 5W. The BlueCube power module family, is available in two series, the LX3i (3W) and LX5i (5W). They offer an immediate drop in AC/DC solution with a footprint of (1.8" × 0.92") and require no additional external components. All BlueCube modules operate over
Low Power Converters Added to Sixteenth-brick Series
August 2, 2007 6:03 am | CommentsNetPower Technologies added two low-current families to its high efficiency Sixteenth-brick SRS Series. The 25A Series of sixteenth-bricks output power in the 25W to 60W range, and the 15A Series targets applications requiring power from 15W to 45W. Many customers are using 15A sixteenth bricks to replace traditional 1" × 2" converters, thereby gaining more power at higher efficiency in a smaller space. These two sixteenth brick series share
RoHS-compliant Oxygen Sensor
August 2, 2007 5:44 am | Commentse2v’s EC410 is said to be the only RoHS-compliant oxygen sensor on the market. The lead-free device is guaranteed leek free and has a longer life expectancy than comparable lead-based sensors, according to the company. The lightweight EC410 features low power consumption; is a simple circuit application for easy installation; and it has standard industrial miniature body sizes.
30W CEC-Compliant Adapter with Interchangeable Plugs
August 2, 2007 5:14 am | Phihong | CommentsPhihong USA announces the expansion of its adapter line with a 30W version designed for worldwide use. Designated the PSC30R Series, the 30W adapter is available with four interchangeable clip adapter plugs for use in virtually any power outlet around the world. This worldwide adapter allows a single part number to be used, simplifying inventory controls and approvals. This series of adapters is suitable for applications involving point-of-sale equipment, test equipment, network equipment and battery chargers. The adapter is
Reciprocating Machinery Protector for Continuous Vibration Monitoring and Protection of Reciprocating Compressors
August 1, 2007 10:33 am | CommentsThe IMI Sensors Division of PCB Piezotronics’ Model 649A01 Reciprocating Machinery Protector (RMP) uses next-generation impact monitoring technology. This two-wire, loop-powered, 4-20 mA transmitter detects impacts from mechanical shock events, which typically occur in or near a machine’s cylinder assembly. This technology is appropriate on reciprocating machinery where these high frequency impacts are often overlooked, or when trending overall vibration levels. The hermetically sealed design can be easily interfaced with existing alarm, control and monitoring systems such as PLCs, DCSs and SCADA systems.
Backlight Controllers for Notebook Computer LCD Displays
August 1, 2007 10:15 am | Microsemi Corporation | CommentsMicrosemi added two backlight controllers for notebook computers, additions to its portfolio of devices that power CCFLs in LCD displays. Designated the LX1693 and LX1697, the backlight controllers are optimized for the wide input voltage range found in notebook display applications and support Intel's Display Power Saving Technology that adjusts brightness as a function of video content. The advanced architecture of the LX1693 includes all the support components needed to integrate
