Using a QMEMS crystal chip, Epson Toyocom’s RX-4571BD and RX-8571BD real-time clock modules come in a 3.400-mm × 1.700-mm × 1t-mm 10-pin SON package. The RX-4571BD supports a 3-wire serial interface and consumes a standby current of 0.320 µA at 3 V, while the I²C-Bus-compliant RX-8571BD has 128-bit user RAM and
Having primary output voltages from 12 V to ~48 V and a secondary output of 5 V at 4 A, PowerGate’s PowDec BSL600 Series switching power supplies offer 600 W of output power. The 9” × 3.7” × 1.6” instruments exhibit a universal AC input with active PFC; end-mount ball-bearing fans, remote sense, remote on/off control, power good signal, and
Consisting of capacitive ceramic pressure cells in stainless-steel construction, Sensortechnics’ KTE2000CS Series submersible pressure sensors offer hydrostatic low-level measurement from 50 mbar (0.5 water column) Full Scale. The transmitters are calibrated and temperature compensated from -20°C to 70°C while providing a 4-mA to 20-mA output signal. A cable with an integrated vent tube allows a true reference pressure to the
Providing full-color output in a 3-W package, Lumex’s AstraLED RGB LED demonstrates a light intensity of 8 lm, 25 lm, and 20 lm, respectively, at 300 mA (red) and 350 mA (green and blue). The 10-mm × 16-mm × 3.30-mm (0.39” × 0.63” × 0.13”) device operates in a temperature range from -30°C to 85°C, withstands reflow soldering temperatures of
Offering a power density of 0.85 W/cm³, Murata Power Solutions’ MEV and MEA Series isolated 1-W DC/DC converters achieve a typical efficiency of 84%. The 0.770” × 0.236” × 0.394” SIP 7-packaged instruments present load regulation performance of <5%, input voltages of 5 V or 12 V, output voltages from 5 V to 12 V, toroidal magnetics, ceramic
Visible to the system as 2 independent SATA drives, Curtiss-Wright Controls’ XMC/PMC-550 NAND Flash solid state drive provides up to 32 GB of disk space. The component delivers data transfer rates of up to 30 MB/s for raw read and write access and up to 40 MB/s with software RAID support. The device exhibits hardware write protection, up to
Functioning in a TLM832D package, Central Semiconductor’s CTLM3410-M832D (NPN), CTLM7410-M832D (PNP), and CTLM3474-M832D (complementary NPN/PNP) dual TLM transistors have a typical VCE(SAT) of 20 mV (NPN) and
Using a highly-integrated digital PWM controller, the 100-W BMR450 voltage regulation module (VRM) from Ericsson Power has a component count up to 50% smaller for a higher power density (120 A/in2) than a similar analog product. Further performance advantages are realized using the device’s embedded dynamic and adaptive controls.
Retrofitting and replacing common GE ET-16 sockets, DDP’s PowerLine PL16 Pilot 16-mm LED pilot light includes a solid-state, bayonet-based LED lamp and a Lexan lens that resists impact in industrial plants and utilities. The device uses a shunt resistor to reduce transient current and prevent a false positive indication by the LED. The product comes in 24-V, 48-V, or 120-V designs with thermoplastics, an operational lifetime of up to 100,000 hours, and
Coming with surface-mounted signal leads and through-hole ground tails, Samtec’s Mini HDMI (MHDMI) Series I/O receptacles are comprised of 19 contact positions with 5 signal pairs and 4 power lines. The mating cable plug (HPSTP Series) exhibits a micro-shielded twisted pair of 30 AWG cable, to prevent EMI interference from
Protecting sensitive datacom and telecom equipment from transient surge voltage damage from lighting strikes and equipment switching operations, Tyco Electronics’ R Series gas discharge tubes (GDTs) exhibit capacitance values as low as 0.5 pF. The SMT components offer a voltage range from 75 V to 600 V, sizes from 3 mm to 8 mm, 2- or 3-
Delivering power of 100 W (dual), 300 W, and 400 W, Chroma ATE’s 63600 Series DC electronic loads can draw a typical rated current of 80 A under a voltage of 0.4 V. The instruments simulate dynamic loading applications with programmable load levels, slew rates, duration, and conducting voltage. The devices exhibit an audio frequency
Requiring only eight pins and traces compared to as many as 26 in similar dual-channel devices, a pair of four-channel 12-bit analog-to-digital converters (ADCs) Analog Devices use up to 50 percent less printed-circuit-board surface area than other ADCs in their class. Requiring a single 1.8-Vin, the 250-MSPS (mega-sample-per-second) AD9239 incorporates a packetized output scheme, while the 210-MSPS AD9639 supports a JESD204-compliant output.
Providing an interface between USB and RS232-based devices, the USB-RS232-WE cable from Future Technology Devices has a small PCB encapsulated into the USB connector with an FTDI FT232R serial UART IC interface plus a RS232 level shifter. Supporting data transfer rates up to 1 Mbaud, the cable has LED indicators
Performing in portable and wireless applications, ON Semiconductor's NCP2991 Class AB audio amplifier offers a power supply rejection ratio (PSRR) of -103 dB. The 1.450-mm × 1.450-mm × 0.600-mm µBump-packaged component demonstrates selectable start-up time between 15 ms and 20 ms, current consumption of 20 nA, total harmonic