The ZXLD132X Inductive DC/DC Converter Series from Zetex drives single or multiple LEDs with currents from 700 mA to 1.5A, in buck, boost and buck/boost configurations. The driver’s 3 mm × 4 mm DFN package is said to reduce the circuit footprint of existing designs by up to 50 percent. A variable “on/off” time-control scheme, with an adjustable peak switch current limit, makes chips simple to control. Both LED current and peak inductor current can be set accurately and independently.
SICK STEGMANN’s DFS 60 Incremental Encoders are available in blind hollow shaft versions. These blind hollow shaft encoders are designed to reduce the potential for contamination, making them suitable for use in dirty or dusty environments with water washdown cleansing. DFS60 blind hollow shaft encoders deliver from 1 to 65,536 ppr with reliable operation
MtronPTI introduced the XO5120 Series OCXO, an industry standard 1” x 1.4” single OCXO that offers desired phase noise combined with stability over a wide range of operating temperatures. The series offers phase noise capabilities at -155 dBc and performance at 10 kHz offset at 10 MHz nominal frequency. This series also provides +/- 2 ppb stability performance over commercial temperatures and +/- 3 ppb over industrial temperatures
Phoenix Contact introduced the FKCN 2.5 spring-cage plug connectors and compatible CCDN 2.5 base headers. The innovative push-in spring-cage technology allows rigid and flexible wires with ferrule to be connected quickly without any tools. The connector has a large wire entry so that it can safely support flexible wire ferrules. Wires can be disconnected easily using the orange actuation levers
CIT Relay & Switch introduced its J860 Series monostable, high dielectric relay with 2.5 kV surge strength that conforms to FCC Part 68. The J860 is DPDT with coil voltage choices of 3V, 4.5V, 12V and 24V DC. This relay measures in at 15.0 mm × 7.5mm × 9.5 mm. The relay is UL/CUL recognized and RoHS compliant, featuring cadmium-free contacts.
Aitech Defense Systems offers a high-performance, single-slot single board computer (SBC) that allows the user to initiate different power-saving options, depending on application requirements. Designed for mission-critical space environments, the 3U CompactPCI radiation-tolerant S950 uses as little as 13.5W in full operation, less than 8W in nap mode and less than 10W with limited performance for less intense processing requirements
ROAL Electronics announced their MultiLINQ DC Power Splitter, designed to address service life of the LED lighting system. The device eliminates the need for multiple Class 2 power supplies within the sign, and relocates the power to an easily accessible location. It is a non-dissipative device with no wear-out mechanism
Powerex has added four products to its line of fast diode modules. The devices feature a blocking voltage of 3300V, a recovery time of 1.2 µs max and an isolation voltage of 6000V. Options include a choice of the standard dual or common cathode configuration and a choice between Aluminum Nitride or Alumina isolation materials, offering low thermal impedance.
Audience Semiconductor announced a voice processor based on the intelligence of the human hearing system and began sampling these chips to mobile handset manufacturers. By understanding the entire audio pathway - from the cochlea to the brainstem to the thalamus and cortex - the company can offer a
International Manufacturing Services, Inc. (IMS) introduced the B-Series Therma-Bridge thermal management device. It uses a thermally conductive Aluminum Nitride chip with metalized terminals to transport heat from one location to another, enhancing overall board performance.
The Bel Power division of Bel Fuse Inc. announced the 0RQB-C0U Series of open-frame isolated DC/DC converters. Housed in the industry standard ¼ brick package, the low-cost series provides up to 100W of output power from a nominal 48V input. It features a 4-to-1 input voltage range to accommodate both a 24V and 48V standard input voltage in the same module, it is engineered with built-in input and output filtering to further minimize part counts
Satori Technology announced the ST265 extending dynamic range USB power meters up to 26.5 GHz. The ST series are complete miniature RF and Microwave power meters. All measurement data and settings are sent via a USB interface to and from a PC or laptop. This gives the concept of using a computer as the user interface in classic microwave power measurement.
Molex Incorporated’s Impact backplane connector system is designed to meet the next generation requirements of telecommunications and data networking equipment. They provide up to 80 differential pairs per linear inch in less than 2 mm total width. The system offers two compliant pin design options so customers can balance their electrical and mechanical application needs. Additional features include; broad-edge coupled, hybrid shielding design, providing low cross-talk
Omron Electronic Components LLC announced an addition to its B6TS application-ready touch sensing IC family; 8-channel and 16-channel LF versions are now available. This family of products measures floating capacitance through most insulating touch panel materials. Therefore, they are suitable for use in appliance, medical, commercial, fitness, consumer, and other products that must be able to withstand long life, cleaning, and be easily operated by personnel wearing thin polymer surgical or food service gloves.
Keystone Electronics Corp. announced a series of advanced, miniaturized, high speed USB plug and socket interconnects which accommodate accelerated wideband applications for computer and electronic devices. With data transfer speeds up to 480Mbps, these universal serial bus connectors interface with peripherals at 3 to 5 times the speed of parallel types plus 20 to 40 times faster than serial port connections for: Mouse/Keyboards, MP3 Players, Digital Cameras, DVD Players, Cable Modems, LAN’s, and Audio Visual Equipment.