Advertisement
Product Releases
Subscribe to ECN Magazine Product Releases

OCXOs Exhibit Small Footprint

December 11, 2008 9:20 am | Comments

Coming in hermetically-sealed and SMT packaging, respectively, Vectron International’s OX-500 and OX-501 oven-controlled crystal oscillators (OCXOs) measure 9 mm × 14 mm. The OX-500 presents a temperature stability of better than ±25 ppb in military, wireline, wireless, and test and measurement applications. The OX-501 offers temperature stability better than ±30 ppb (SC-Cut version) and ±100 ppb (AT-Cut version) in

Connectors Transmit Data at 12.5 Gb/s

December 11, 2008 8:43 am | Comments

Coming in orthogonal and backpanel configurations, FCI’s ZipLine connectors demonstrate data transmission speeds of up to 12.5 Gb/s. The products exhibit density of up to 101 signal pairs per linear inch at a column pitch of 1.5 mm, press fit termination, and similar signal integrity to FCI’s AirMax VS products. The interconnects use hard

Application Kit Enables SMB Protocol

December 11, 2008 8:14 am | Comments

Using a Windows or Linux server as a networked file storage device to build and test an embedded system, Rabbit’s SMB (Server Message Block) network storage application kit allows a RabbitCore RCM4010 module to use the SMB protocol. The product includes the Dynamic C integrated development environment with debugger, linker,

Advertisement

Desktop Power Adapters Achieve CEC Compliance

December 11, 2008 7:03 am | Comments

Exhibiting output overvoltage, overload, and short-circuit protections, Tumbler Technologies + TRUMPower’s TRM24 Series desktop power adapters comply with Class I and Class II medical standards and CEC efficiency level IV regulation. The 1.69” × 4.16” × 1.18” devices accept a universal input from 90 V to 264 V, have voltage

TOPICS:

Spectrum Analyzers Feature Large-signal Immunity

December 11, 2008 6:32 am | Comments

Featuring a DANL of less than -148 dBm (1 Hz) at 13 GHz and less than -144 dBm (1 Hz) at 30 GHz, as well as a third order intercept of 15 dBm, two signal and spectrum analyzers (13.6 GHz and 30 GHz) from Rohde & Schwarz feature large-signal immunity. With a removable hard drive and USB interfaces

OLED Module Consumes Less Power than LCDs

December 11, 2008 6:26 am | Comments

With power consumption at typically 30%-50% less than similar sized TFT-LCD technology, the OSD0760WVGA-T from OSD Displays is a 7.6" diagonal 800xRGBx600 (SVGA) Active Matrix OLED module. Intended applications include industrial controls panels, medical monitors and, high-end consumer products, such as

TOPICS:

Distribution Transformers Manage up to 75 kVA

December 11, 2008 6:01 am | Comments

Provided as an unshielded alternative to the ET series of shielded low-voltage dry-type distribution transformers, a family of general-purpose distribution transformers for commercial, institutional and industrial applications from SolaHD is available in versions rated from 15 kVA to 75 kVA. Features of the stainless-steel-enclosed devices include NEMA TP-1 compliance and optional weather shields to meet UL-3R requirements

Encoders Offer Resolution/Bore Diameter Options

December 11, 2008 5:57 am | Comments

Suiting DC motors, actuators, and motion control applications, CUI’s AME, BME, and LME Series modular incremental encoders demonstrate different resolution and bore diameter options, depending on model. The 2-channel AME Series exhibit resolutions from 100 ppr to 1024 ppr and bore diameters from 3 mm to 8 mm. The 3-channel BME Series includes an index pulse, resolutions from 100 to 1,024 ppr (2-channels and no index for 1,000-ppr and

Advertisement

Coaxial Multi-position Switches Work to 40 GHz

December 11, 2008 5:12 am | Comments

Including K-type connectors, Ducommun Technologies’ QK Series coaxial multi-position switches exhibit frequencies from DC to 40 GHz. The SP3T-SP6T devices present a nominal RF impedance of 50 Ohm and an operating life of >1,000,000 cycles over an ambient operating temperature range from -35°C to 85°C. The MIL-E-5400- and Mil-S-3928-compliant units demonstrate a max. switching time of 15 ms in a break-before-make switching

Design Kits Calibrate Optoelectronic Devices

December 10, 2008 10:15 am | Comments

Mounting optoelectronic devices directly or remotely via a connectorized configuration, OPTEK Technology’s OCB100 Series auto-calibration design kits enable engineers to calibrate optoelectronic devices. The systems regulate reflective, interruptive, and special opto sensors to produce a consistent output, and can set internal

PCMA Benders Displace in Millimeter/Micrometer Range

December 10, 2008 9:58 am | Comments

Containing buried internal electrodes in a monolithic ceramic housing, Morgan Electro Ceramics’ line of co-fired piezo ceramic multi-layer actuator benders (PCMA benders) provides controllable and repeatable displacement in the millimeter and micrometer range. The devices offer lengths from 10 mm to 30 mm, widths from 3 mm to 20 mm, thicknesses from

TOPICS:

USB Load Cell Handles up to 5,000 lbs

December 10, 2008 9:24 am | Comments

Available with USB output and metric threads, the redesigned LCF400 Tension & Compression Load Cell from FUTEK Advanced Sensor Technology is offered in versions capable of handling from 500 lbs to 5,000 lbs. The device provides a variety of voltage- or current-driven outputs to ease systems integration

Circular Connector Includes Secondary Locking Mechanism

December 10, 2008 9:17 am | Comments

Capable of withstanding harsh and wet-area environments, an APD (Automotive Product DIN) circular connector from ITT Interconnect Solutions features a secondary locking mechanism. The connector has 19 contacts, with the option of increasing to 27 contacts. For applications requiring a larger load capacity

Advertisement

Illuminated Tact Switches Contain Independent LED Leads

December 10, 2008 9:17 am | Comments

Offering multiple LED color options, E-Switch’s TL1240 Series illuminated tact switches have through-hole termination and independent LED leads. The units exhibit an electrical life of 100,000 cycles, an operating force of 160 ± 50 gf, max. contact resistance of 100 mOhm (initial, from 2 VDC to 4 VDC), min. insulation resistance of 100 MOhm, dielectric strength of 250 VAC, and an operating temperature from -20°C to 70°C. The devices’

TOPICS:

ESD Protection Diodes Possess 0.18-mm² Footprint

December 10, 2008 9:11 am | Stmicroelectronics | Comments

Matching the 0201 outline, STMicroelectronics’ ESDALCxx-1U2 family of ESD protection diodes have a footprint of 0.3 mm × 0.6 mm. The ESDALC3V9-1U2, ESDALC6V1-1U2, and ESDALC14V2-1U2 units offer a breakdown voltage of 3.9 V, 6.1 V, and

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading