Offering 480 × 272 resolution and 24-bit color, OSD Displays’ OSD43FNKD222 4.3” WQVGA TFT utilizes a single FPC flex interconnect for a touchscreen interface, LED backlight power supply, and data display. The white LED backlight is rated for a minimum service life of 20,000 hours with a typical power requirement of 317 mW. The initial brightness of the four-wire resistive touchscreen is typically 220 cd/m². The product offers an overall size of 105.50 mm ×
Intended for angular tilt detection in reference to gravity, a dual-axis inclinometer from TURCK can be mounted at ±10°, ±45°, ±60°, and ±85° angles for more flexible deployment. The product incorporates a micro-electro-mechanical capacitive element that utilizes two parallel plate electrodes, one stationary and one attached to a spring-mass system. Movement causes acceleration that
Presenting a control voltage range from 0.1 V to ~16 V, Crystek’s CVCO55CC-4267-4442 VCO operates from 4,267 MHz to 4,442 MHz with an input voltage of 8 V. The 0.5” × 0.5” SMT oscillator exhibits a typical phase noise of -104 dBc/Hz at an offset of 10 KHz, typical output power of 5 dBm, and a maximum current consumption of 40 mA. The component
Offering control-loop functionality in a DIN-rail mounted package, the EZ-ZONE RM configurable multi-loop temperature/process controller from Watlow can be used as a PID temperature/process controller, an over/under limit controller, or an integrated controller.
Targeting enclosures, Tellurex Corporation’s four new models of plug-and-play cooling engines include matching temperature controllers for thermal management applications. The lineup consists of two air-to-air engines for cooling/heating enclosure air, rated at 22 W and 45 W, and two cold-plate models for direct contact cooling, rated at 30 W and 60 W. The instruments
Using a hot-swap switch, fan fail indicator, and handles, Elma Electronic’s 3U Microslim 19” rackmount enclosure utilizes cooling units in a push/pull airflow configuration exhibiting 42 ft³/min. of airflow each. The chassis offers 12 AdvancedMC (AMC), 2 MicroTCA
Presenting input between 9.5 W and 24 W, GlacialLight’s LED-T8 LED light tubes demonstrate a brightness range from 480 lm at a flux of 60 lm/W to 2,560 lm at a flux of 80 lm/W. The products offer input voltages from 90 VAC to 240 VAC, power consumption from 9 W to 24 W, lengths from
Comprised of five monochrome and four color models, GiantDragon Gigabit Ethernet (GigE) machine vision cameras from Toshiba Teli leverages the AIA GigE Vision open standard to deliver high-bandwidth streams of non-compressed data over CAT-5e and CAT-6 cables without specialized interface hardware or frame grabbers.
This achievement not only speeds us forward in the development of real-world solid-state lighting, it demonstrates that LED-based tech is not the only game in town.Delivering a light yield of over 60 lumens/watt, an organic light-emitting diode (OLED) white light emitter from BASF and Osram Opto Semiconductors also meets international Energy Star SSL Standard with regard to color requirements.
Including Hypervisor Software 2.0 from Real-Time Systems, congatec AG’s conga-QA Qseven embedded PC module lets any two operating systems to be run in parallel independently from one another and with real-time capability. The component supports Intel hyper-threading and virtualization since it is based on the Intel Atom Z530 processor and the Intel System Controller Hub US15W. The individual CPUs, devices, memory, and I/O ports are directly
Working in high-speed I/O ports and systems requiring 30-kV contact discharge protection when tested to IEC61000 specifications, OnChip Devices’ OC-ESD-DK1 ESD protection diode designer kit comes with 12 different ESD protection diode products. The box consists of TVS devices, I/O port-specific products, 30-kV contact ESD protection diodes, and
Enhancing the company’s SV01 Series, Murata Electronics’ SV3H Series SMT rotary position sensors achieve a rotational life of 10 million cycles. The component is appropriate for automotive applications, such as angular detection (steering wheel, seat position, gear-shift, and pedal positioning, as well as adaptive front lighting systems), selector switches
Functioning in severe operating conditions, C&K Components’ DTC family of switches suit industrial controls, farm machinery, and off-road vehicles. The ESM and DSM single- and double-switch modules are protected from dust, water, oil, and solvents via silicon rubber caps and sealing to IP65 when mounted. The RS bi-directional and QS quadrant switches offer tactile feedback and positive snap-point action in front panels and
Plugging into TBvision, a module within the LDRA tool suite, the TBsecure plug-in from LDRA includes the Carnegie Mellon Software Engineering Institute (SEI) CERT C secure coding standard. Enabling developers to see how the source code performs against security vulnerabilities, fault-detection, and adherence
Certified to work in conjunction with the DisplayMark technology for Digital Signage Systems, the SVH-1920 LCD Controller from Digital View supports high-resolution LCDs up to 1920 x 1200. The validation information is sent via an RS-232 protocol. The controller provides full screen buffering, and multi-panel support