Advertisement
Product Releases
Subscribe to ECN Magazine Product Releases

White LEDs Implement Advanced Materials, Packaging

December 17, 2008 7:50 am | Comments

Providing a thermal resistance of 25K/W and available in power levels from 5,600 mcd to 14,000 mcd, the VLMW84xx Series of SMT white LEDs is presented as the first InGaN/TAG on sapphire devices of their type to come in a CLCC-2 flat ceramic package. The 0.75 x 3.3 x 3.4-mm emitters have a service life of up to 50,000 hours, with a typical luminous flux of 27,000 mlm

Power MOSFETs Exhibit High Package Current Rating

December 17, 2008 6:52 am | International Rectifier | Comments

Offering TO-220, D2PAK, and D2PAK-7 packaging options, International Rectifier’s new range of trench HEXFET power MOSFETs provide a package current rating of up to 195 A (TO-220 and D2PAK) and 240 A (D2PAK-7). The N-channel components demonstrate on-state resistances from 2.5 mOhm to 22 mOhm, voltages from 60 V to 200 V, and Qg from 73 nC to 200 nC. The RoHS-compliant devices qualify to

16-bit DAQ Cards Offer Simultaneous Sampling and Streaming

December 17, 2008 6:36 am | Comments

Designed for PCI Express, Strategic Test’s 16-input UF2e-4731 and 8-input UF2e-4730 500-kS/s 16-bit data acquisition cards exhibit 128 MS memory and 120 MS/s continuous streaming to host PC. Each channel has its own 500-kHz ADC for true simultaneous sampling, together with voltage ranges from ±50 mV to ±10 V, a programmable

Advertisement

Motor Controller Powers Brushless DC Fans and Motors

December 17, 2008 6:10 am | Comments

Integrating a Hall sensor and amplifier, digital control circuitry, and a full-bridge output driver, Diodes Incorporated’s AH5792 smart motor controller drives low-power, single-coil brushless DC fans and motors. The SOT553-packaged component presents an operating voltage range from 1.8 V to 5 V, a 400-mA peak current-rated bi-directional H-bridge output stage, a pair of push-pull output drivers to source and sink current, and

Power Supplies Demonstrate High Full-Load Efficiency

December 17, 2008 5:57 am | Comments

Yielding input voltages from 90 VAC to 264 VAC, Autec Power Systems’ SP-75 Series AC/DC power supplies offer a typical full-load efficiency of 82%. The 2” × 4” × 1.2” devices exhibit output voltages from 5 VDC to 48 VDC (in 1-V increments) with 20-ms hold-up time. The UL60950-, cUL-, and TUV-approved units deliver

Adapter Kit Serves On-Site Antenna Installations

December 17, 2008 5:45 am | Comments

Coming in a zippered leather case, Bomar Interconnect Products’ ADPT4RP 42-piece adapter kit contains the parts most often required by technicians in on-site antenna installations. The product comprises of 2 male and 2 female Type N, BNC, UHF, TNC, TNC-RT (reverse thread), TNC-RP (reverse polarity), SMA, and SMA-RP (reverse polarity) 50-Ohm coaxial parts, as well as 8 universal adapters and 2 flat wrenches. The parts are

Camera Delivers Fast Image Signal Output Rates

December 17, 2008 5:34 am | Comments

Adding to the FireDragon line, Toshiba Teli America’s CCSFU15CC18 UXGA-resolution (1600 × 1200) color camera incorporates FireWire-B (IEEE-1394.b) technology, resulting in image signal output rates of 800 Mbps. The 44-mm × 29-mm × 44-mm instrument exhibits full-frame color transfer rates up to 15 frames per

Connector Offers Touch for Hazardous Voltage Applicatons

December 17, 2008 5:25 am | Comments

Providing power contacts rated up to 110 A, the SBS75x Connector from Anderson Power Products is recommended for use with DC voltages in systems operating from 50 V to 600 V. The housing accepts up to four auxiliary contacts for applications requiring signal capability. The male signal contacts (6.4 mm to 9.3 mm) are available

Advertisement

Serial Adapters are Software Configurable

December 17, 2008 5:17 am | Comments

With an operating temperature range of 0°C-70°C, two embedded USB-to-serial adapters from Sealevel Systems are software configurable for RS-232, RS-422, or RS-485. All configuration and electrical interface selections are handled through the driver software. The serial ports on each SeaLINK adapter appear as standard COM ports

Handheld Computer Performs in Rugged Environments

December 17, 2008 5:16 am | Comments

Coming in a case molded from Cycoloy, Two Technologies’ Safari IP-65-rated handheld computer resists against dust, water, chemical substances, and optimal drop and shock. The 14-oz device consists of a 240 × 320 QVGA transflective display with integral touch screen, a 26-key or a 41-key alpha-numeric keypad, 128-MB SRAM, 128-MB internal Flash, a user-accessible SD card slot. The product uses the Microsoft Windows

Resistors Target RF Power Combiners

December 17, 2008 4:57 am | Comments

Offering bolt-down or solder-down packaging with silver contacts, Innovative Power Products’ IPP-RB201LC, IPP-RB203LC, IPP-RB205LC, IPP-RB206LC, and IPP-RB213LC Series BeO ceramic flange resistors operate in RF power combiners. The IPP-RB201LC components exhibit power of 20 W and parasitic capacitance of

LCD Touchmonitor Exhibits Wide Viewing Angle

December 16, 2008 10:49 am | Comments

Suiting high-traffic casino gaming, video-game entertainment, and self-service kiosk environments, Elo Touchsystems’ 2240L 22” open-frame LCD touchmonitor uses a LCD panel with a viewing angle of 178° × 178° horizontal and vertical. The 500-mm × 332-mm × 80-mm device demonstrates Intellitouch SAW technology or surface capacitive technology and dual serial and USB connectivity. The product presents an

Choke Coil Suits HDMI Transmission Line Interfaces

December 16, 2008 10:29 am | Comments

Coming a EIA-1210 case size package, Taiyo Yuden’s CM01H900 wire-wound common-mode choke coil targets HDMI transmission line interfaces in flat-screen TVs, Blu-Ray disc recorders, PC video output interfaces, and other high-definition digital imaging devices. The unit offers min. common-mode impedance of

Advertisement

Distribution Boxes Connect Sensors and Actuators

December 16, 2008 10:13 am | Comments

Avoiding the use of parallel cabling and installation involving control units or switch cabinets, ERNI Electronics’ M8/M12 line of passive I/O distribution boxes allow for the direct connection of sensors and actuators. The UL- and CSA-approved devices are designed for IP65/IP67 protection, and are built for use in harsh and humid

Magnetic Field Sensor Delivers Direct Analog Output

December 16, 2008 9:52 am | Comments

Working on pneumatic cylinders, TURCK’s new WIM45 magnetic field sensor provides a direct analog output for determining the position of a piston magnet. The device detects the position of a piston on standard pneumatic cylinders by utilizing a series of Hall elements, which sense the piston magnet and send a signal back to

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading