Advertisement
Product Releases
Subscribe to ECN Magazine Product Releases

Cameras Contain Gigabit Ethernet Interface

November 6, 2008 8:20 am | Comments

Targeting industrial inspection, general machine vision, and microscopy, Prosilica’s GS Series periscope-type CCD cameras present a gigabit Ethernet interface (GigE vision) to allow cable lengths of up to 100 m using conventional network cables and up to tens of km using fiber optics. Functions consist of snapshot/globalshutter, pixel binning, area of interest readout, external

Digital Delay Generator Exhibits 10 ns Edge Resolution

November 6, 2008 6:58 am | Comments

Having 8 timing channels with programmable logic, Berkeley Nucleonics’ Model 725 multi-trigger digital delay generator demonstrates edge resolution of 10 ns. Up to 8 trigger inputs can be logic signals, switches, transducers, interlocks, sensors, computer commands, and

Resistors Show Wide Resistance Range

November 6, 2008 6:18 am | Comments

Offering sizes from 0402 to 2512, Stackpole Electronics’ HGC Series thick-film chip resistors exhibit resistance values from 1 KOhm to 2 TOhm. The components present tolerances from 20% down to 0.25%, TCRs ranging from 200 ppm down to 25 ppm, and VCR characteristics of <1 ppm/V. Applications include voltage drivers for test instruments, meters, and

Advertisement

Step Motors Suit Multi-axis Apps

November 6, 2008 5:35 am | Comments

Based on the MotionChip DSP control technology, Technosoft’s IS23x-MA intelligent step motors adapt to distributed motion control applications with integrated intelligence. The 61 mm to 96 mm × 57 mm × 57 mm units embed a stepper motor, power electronics, a controller, and an interface with basic local digital and analog I/O signals, and PLC functionalities. The ready-to-run steppers offer permanent output torque from 1 Nm to 1.8 Nm, a single power supply from 12 V to 48 V, and high resolution

Controller ICs Target Capacitive Touch Apps

November 6, 2008 4:07 am | Comments

Adding to the PureTouch family, Leadis Technology’s LDS6003, LDS6005, LDS6023, LDS6025, and LDS6028 touch controller ICs perform in mobile and non-mobile capacitive touch applications. The 0.8 mm thick components operate at 1.8 V with power consumption of <200 µW, Strongest Touch Selection (STS) for inadvertent touch prevention; Threshold Individually Programmed (TIP), and Automatic Ambient Compression (AAC) for environmental response

LED Lighting Creates Beam Angles

November 5, 2008 11:17 am | Comments

Powering via a 24 VDC Class 2 power supply, DDP’s Emerge LED CoveWash customizable linear LED lighting utilizes a linear parabolic reflector and thin-film diffusers to create various beam angles. The Energy Star-compliant product consumes 3 W/ft while providing upwards of 145 lm/ft and efficacy of 40 lm/W when combined with DDP’s SSLD technology. The UL-certified lighting

Temperature Controllers Use Dual LED Display

November 5, 2008 10:47 am | Comments

Accepting a variety of thermocouple and RTD inputs, Omega Engineering’s CN740 Series 1/16 DIN temperature controllers show process value and set-point value simultaneously on a dual LED display. The CE-compliant products offer single output control, either simple ON/OFF or full PID, two alarm outputs, and indication of auto-tuning, engineering units (°F or °C), and alarm status on

Motherboard Utilizes Quad Processor

November 5, 2008 10:15 am | Comments

Possessing the Intel Q45 Express chipset with Intel I/O controller hub 10 DO, ITOX’s EL330-DR micro-ATX form factor motherboard supports the 45-nm Intel Core 2 Quad processor Q9400 with up to 6 MB of shared L2 cache and up to 1,333 MHz front side bus (FSB). The component protects against software-based attacks, and safeguards the confidentiality and integrity of data stored or created on an embedded system via Intel Trusted Execution Technology (TXT) support. The device integrates

Advertisement

DC/DC Converter Delivers 3.3 VDC

November 5, 2008 9:33 am | Comments

Using 200 LFM airflow, Power-One’s SSQE48T25033 sixteenth-brick DC/DC converter supplies 3.3 VDC at 25 A with 100% of full-rated power available at 55°C and 22 A at 70°C. The 22.9 mm × 33 mm × 9.5 mm devices offer ±3% combined line, load, and temperature regulation; efficiencies of up to 93%, an input range from 36 VDC to 75 VDC, the capability to

Field-Replaceable SMAs Offer Improved VSWR

November 5, 2008 9:02 am | Comments

Rated for maximum dielectric withstanding voltage (DWV) of 1000 V RMS at 60 Hz and sea level, a line of field-replaceable SMAs from San-tron feature VSWR of 1.07:1 from DC to 18 GHz, and 1.25:1 or better through 26.5 GHz. The connector families include models for mating with 0.012-, 0.015-, 0.018-, and 0.020-in center pins. The 50-O SMAs feature passivated 303 stainless-steel bodies

BGS Sensors Exhibit Automatic Crosstalk Protection

November 5, 2008 8:26 am | Comments

Delivering a sensing range of up to 350 mm, Pepperl+Fuchs’ ML7 background suppression (BGS) sensors present automatic crosstalk protection, enabling multiple sensors to be mounted side-by-side without inter-unit interference. The 31 mm × 11 mm × 23 mm devices use LED indicators for provide power and output status, and diagnostic information. The instruments utilize the 4-in-1 output for detecting the connected load and sink or sources as needed. The units suit

Connection System Works in 22 A Apps

November 5, 2008 7:53 am | Comments

Based on the 1.5 mm width ISO blade-type terminal system, Molex’s MX150 cable-sealed 1-by-2 connection system supports low-level signal and power applications up to 22 A. The product offers sealing for SAE wire gauges from 14 AWG to 22 AWG and metric-sized wires, and

Servo Motor Controller Possesses CANopen

November 5, 2008 6:55 am | Comments

Configuring for peer-to-peer master or slave, QuickSilver Controls’ QCI-D2-IG-J1 OEM servo motor controller uses CANopen to share I/O and registers with other CANopen-enabled SilverDust controllers or third-party CANopen devices. The component supports CAN in Automation (CiA) CANopen drives and motion control profile 402 for allowing master devices to

Advertisement

CPU Board Features Accelerated SDRAM

November 5, 2008 6:12 am | Comments

With a clock rate of 733 MHz, and accelerated DDR SDRAM (266 MHz, + 33 percent), the PowerPC-based Rugged Conduction-Cooled CP3210 from Kontron is an updated version of the company's PowerEngineC7. The CP3210 incorporates a thermal sensor for health monitoring and thermal management. The board features onboard user memory of 512 MB

Surge Protector Passes European Test Requirements

November 5, 2008 6:00 am | Comments

Based on thyristor overvoltage protection technology, Bourns’ TISP4310T3BJR-S TISP surge protector meets European ITU-T K.21 testing requirements, which call for 600 Vrms, 600 Ohm, 1 A test for 1 second. The UL-approved component operates in a voltage protection window from 269 VDRM to 310 V(BO) in modems to ensure that the heating effect of

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading