Advertisement
Product Releases
Subscribe to ECN Magazine Product Releases

Power Supply Design Software Supports Switcher ICs

January 7, 2009 6:04 am | Power Integrations | Comments

Including design functionality for offline SSLDs, Power Integrations’ PI Expert Suite v7.1 power supply design software provides support for the LinkSwitch-CV and LinkSwitch-II families of primary-side-control switcher ICs. The PI Expert program takes a designer’s power supply specifications and automatically generates the

R-C Protection Devices Target 3G Handset LCD Interfaces

January 7, 2009 5:37 am | Comments

Operating in frequencies from 1.8 GHz to 2.5 GHz, Semtech’s EClamp237xK family resistor-capacitor (R-C) protection devices serve high-resolution color LCD interfaces in GSM- and CDMA-based 3G handsets. The RoHS- and WEEE-compliant units exhibit a C(in) value of 20 pF, series resistance of 100 Ohm, and min. attenuation of

Clamp Connectors Offer Configuration Options

January 7, 2009 5:15 am | Comments

Adding to the Mini-Clamp connector line, 3M’s Right Angle Surfacemount Socket connectors come in 3-pin and 4-pin wiremount configurations in socket, panelmount socket, and plug versions. The units offer boardmount socket configurations, including a 3- and 4-pin single row-socket connector; a 6- and 8-pin dual-row socket connector; and

TOPICS:
Advertisement

Pulse Pattern Generator Exhibits Low Jitter

January 7, 2009 4:57 am | Comments

Performing in a frequency range from 2 MHz to 1.5 GHz, Simptronik Technologies’ SK-1500ULJ pulse pattern generator creates digital clock and data signals with rms jitter of <0.5 ps. The instrument demonstrates 5-digit frequency resolution, a rise/fall time of 180 ps, an amplitude range from 100 mV to 3 V, and a touch-screen control interface. Built-in PRBS or customer data patterns are available. The 1.6" × 3.8" ×  7.3" device is

Pulse Airflow Sensors Perform in Embedded Apps

January 7, 2009 4:40 am | Comments

Designed for in-situ airflow sensing, Degree Controls' AccuSense F600 Series pulse airflow sensors function in board-mounted, embedded, and electronics cooling applications, such as telecom, HVAC and environmental monitoring system equipment. The RoHS Level 6-compliant devices provide response to fan failure or airflow blockage prior to component temperature rise and subsequent failure. The NEBS-compliant products are

Rugged Rocker Switch Handles Industrial Apps

January 7, 2009 3:36 am | Comments

Available in both single-pole and double-pole configurations, the e-series rocker switch from Phaseda has an IP54 rating for protection against dust and moisture. The RoHS-compliant switch offers single- and double-throw operation as well as momentary actuation, and can handle up to 20 A at 125 VAC. The switch is constructed of

Breadboard Contains Complete Linux PC

January 6, 2009 6:52 am | Comments

Consisting of a Quad-band GRPS module and a SiRF3 GPS module, Round Solutions’ AarLogic C10/3 breadboard presents a complete Linux PC on a surface of 104 mm × 63 mm. The component includes interfaces for USB, RS232, and Ethernet components, as well as an SD-card reader to enable the expansion of the standard

Low-Side MOSFET Incorporates Self-Protection

January 6, 2009 6:32 am | Comments

Coming in a 2.3-mm × 2.8-mm “flat” SOT23F package, Diodes Incorporated’s ZXMS6004FF IntelliFET low-side MOSFET integrates ESD, overvoltage, overcurrent, and overtemperature protection. The unit exhibits on-state resistance of 500 mOhm, continuous current rating of 1 A, load dump transient tolerance of 60 V, and a logic level

Advertisement

Coaxial Isolator Handles 50 W

January 6, 2009 6:20 am | Comments

Including SMA female connectors, Raditek’s RADI-3.6-4.2-S3-30WR-c 3.60-GHz to 4.20-GHz coaxial isolator is capable of handling 50 W of forward and reverse power. The device demonstrates insertion loss of 0.40 dB, isolation of 20 dB, and VSWR of 1.25:1 in a temperature range from 0°C to 60°C. The coaxial isolator measures

SPDT Relays Receive Class 1 Division 2 Approval

January 6, 2009 6:01 am | Comments

Coming with screw clamp termination, Weidmuller’s five new MICROSERIES single-pole double-throw (SPDT) relays achieve Class 1 Division 2 approval for use in hazardous locations. The five new options include the following versions: 12 VDC, 24 VDC, 24 VUC, 120 VUC, and 230 VUC. The VUC versions accept AC and DC input signals. The RC version demonstrates inductive kickback protection through an integrated RC circuit at

DIN Rail Power Supplies Exhibit Wide Power Ratings

January 6, 2009 5:26 am | Comments

Serving flat control panels typically found in building automation applications, Power Sources Unlimited’s Tracopower TBL Series DIN Rail power supplies demonstrate power ratings from 15 W to 150 W. The EN55022 Class B-compliant devices offer single output voltages of 5 VDC, 12 VDC, or 24 VDC, which are adjustable to

LEDs Target SSL

January 6, 2009 5:17 am | Comments

Created to address solid-state lighting (SSL) applications, the ASMT-Ax00 family of 1-W LEDs from Avago Technologies has a 130-degree viewing angle and comes in a variety of colors, including white. Delivering up to 76 lm at 350mA, the emitters have a maximum allowable junction temperature of 125°C

Filler Materials Cover Multiple Apps

January 6, 2009 5:10 am | Comments

Designed to cure in place once applied to enclosures or castings, Chomerics Europe’s CHOFORM 1122V, CHOFORM 5550, and CHOFORM 5545 silicone-based filler materials serve consumer, industrial, and military/aerospace applications. The 50 shore A CHOFORM 1122V uses a silver/aluminum conductive filler to provide a

Advertisement

PC-Controlled Optometer Holds 36 Light Detectors

January 6, 2009 4:37 am | Comments

Designed for a customized radiometric and/or photometric application requiring multiple detection and monitoring capability, Gigahertz-Optik’s P-9802 PC-controlled optometer enables a user to add from 2 to 36 light detectors. The unit offers fully-automated data processing and remote control operation via PC through its RS232 interface, as well as

Capacitor Series Features Large Current Discharge

January 5, 2009 1:36 pm | Comments

Featuring large current discharge ranging from 3.3 V to 0 V, the XH311HG capacitor series from Seiko Instruments comes in a 3.8 mm x 1.1 mm package. The series is Pb-free reflowable, and has 0.02-F Capacitance. The capacitors are RoHS compliant. Intended application is as backup energy for real-time clocks (RTC) and SRAM in

TOPICS:

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading