Advertisement
Product Releases
Subscribe to ECN Magazine Product Releases

Software Application Adds Decoding to Test Pods

February 11, 2009 6:38 am | Comments

Running on the complete line of USBee test pods, CWAV’s USBee Suite logic analyzer and oscilloscope software application provides serial bus decoding for I²C, SPI, Async, 1-Wire, CAN, and USB. The product includes in-line graphical bus decoding, automatic measurements of waveform data, graphical bus setup, and importing and exporting capability. The suite captures samples at up to 24 Msps and lets users

NOR Flash Memory Uses 45-Nanometer Process

February 11, 2009 6:16 am | Comments

Based on StrataFlash memory architecture, the first multi-level cell NOR flash memory products from Numonyx using 45-nm process technology extends beyond its 65-nm predecessor and is presented as the most advanced memory of its kind available. The 1-Gb monolithic device is drop-in compatible with the company’s existing

Reflective Object Sensor Detects to 1 Inch

February 11, 2009 4:53 am | Comments

Coming in a 0.300" × 0.160" × 0.114" SMT package, OPTEK Technology’s OPB733TR reflective object sensor exhibits an optimizing detection range from 0.400" to 1". The component contains a lensed IR LED with a typical peak emission wavelength of 890 nm. The sensor uses a NPN silicon phototransistor offering output on-state

Advertisement

LED Driver Demonstrates Low Dropout

February 11, 2009 4:15 am | Comments

Serving LED indicators and LCD or keyboard backlighting in entry-level mobile products, AnalogicTech’s AHK3292 2-channel LED driver (SSLD) has a typical dropout voltage of 36 mV. Operating off an input supply from 2.7 V to 5.5 V, the component drives up to 2 LEDs. The SSLD exhibits a maximum LED current of 30.2 mA with ±10% LED output current accuracy and ±3% LED output current matching. An

Cordsets Serve PROFINET Applications

February 10, 2009 10:24 am | Comments

Developed to provide plug-and-play connectivity for applications using PROFINET protocols, a 4-wire cordset family from TURCK connect to BL67 Ethernet gateways for PROFINET—which can be connected to up to 32 I/O modules per gateway—to allow smooth integration into current fieldbus structures.

Silicon Resistor Chips Target Hi-Rel Applications

February 10, 2009 6:58 am | Comments

Using a self-passivating and moisture-resistant tantalum-nitride resistor element, OnChip Devices’ TX, TL, and TR silicon resistor chips perform in medical, aerospace, military, communication, and instrumentation applications. The TX components exhibit a die size of 20 mm × 20 mm, resistance from 10 Ohm to 1 MOhm, absolute tolerance of

TOPICS:

DC/DC Converters Exhibit High I/O Isolation

February 10, 2009 6:26 am | Comments

Meeting IEC 60950-1:2001 safety standard ITE (rated for 250-VAC working voltage), Aimtec’s AM1DC-Z Series 1-W DC/DC converters demonstrate I/O isolation of 6,000 VDC with an isolation barrier of 2.50 mm. The 19.56-mm × 9.90-mm × 12.45-mm devices offer input voltages of 5 VDC, 12 VDC, and 24 VDC; and output voltages of

Embedded Computer Offers PCIe Expansion

February 10, 2009 6:09 am | Comments

Integrating a 1.5-GHz Core 2 Duo CPU with 1-GB DDRII RAM, Advantech’s UNO-3282 embedded computer includes a PCI slot, a PCIe slot, and a user-replaceable kit which can replace the PCIe/PCI slot combination with two standard PCI slots. The device has a fanless, diskless, and cable-less design, and performs in

Advertisement

Accelerometer Serves HUMS and AVC Applications

February 10, 2009 5:56 am | Comments

Designed to avoid ground loops, Dytran Instruments’ Model 3232A2 piezoelectric biaxial accelerometer targets Health and Usage Monitoring Systems (HUMS) and Active Vibration Control (AVC) applications typically found on commercial and military aircraft. The accelerometer elements are mounted orthogonally within

Power Management IC Offers High Configurability

February 10, 2009 4:44 am | Comments

Conceived as a platform device, the DA9052 power management IC from Dialog is capable of supporting all major families of application and mobile graphics processors. Up to 14 power supplies, 16 GPIOs, and other system functions in different operating modes help reduce significantly power consumption overhead in the host processor.

Simulation System Touts High Capacity

February 10, 2009 4:16 am | Comments

Offering 3- or 6-sector configurations, Catapult Communications’ LTE User Equipment (UE) Simulation test system demonstrates a UE capacity of up to 400 connected UEs per sector. The product supports maximum data throughput of up to 300 Mbps downlink per sector, up to 150 Mbps uplink per sector, and up to

LED Lamps Produce 50 lm/W

February 10, 2009 3:52 am | Comments

Offering versions in 5 W, 8 W, and 14 W, Halco Lighting Technologies’ ProLED PAR16, PAR20, PAR30, and PAR30 long neck LED lamps generate up to 50 lm/W. The 120-V devices exhibit a life of 30,000 hours, warm white and natural white colors, and beam spreads of 25°, 40°, 60°, and 120°. The ProLED PAR16 and

Panel Voltmeter Shines in Red, Blue, or Green Light

February 9, 2009 7:24 am | Murata Power Solutions Inc. | Comments

Targeting applications such as battery chargers, power amplifiers, and other monitored electronic applications, the LED-driven three-and-a-half digit DMS-20PC digital panel voltmeter is available with characters in blue, green, or red. The power consumption is 12 mA to 17 mA for the blue and green models and 7 mA to 12 mA in red (all at +5 VDC).

Advertisement

Brushless DC Motors Use Segmented Stators

February 9, 2009 6:51 am | Comments

Delivering up to 400 W, Buehler Motor's ec4more family of brushless DC (BLDC) motors utilize 3-phase segmented stators with a star connection. The instruments present 3 Hall sensors, up to IP40 protection, and bidirectional rotation with no phase advance. The units offer lengths from 50 mm to 119 mm, shafts from 3 mm to

TOPICS:

Fittings and Tubing Perform in Harsh Environments

February 9, 2009 6:34 am | Comments

Functioning in wet and dry applications, Heyco Products’ Heyco-Flex III liquid-tight fittings and tubing resist corrosion, oil, weak acids, and salt water. The nylon products are flame retardant, non-toxic, UV resistant, and rated for Type 3R applications. Applications include automotive equipment, fiber optics, computers and peripherals, lab

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading