BPM Microsystems' Flashstream offers flash programming of NAND and NOR flash memory at speeds as low as 2.5 percent over the theoretical programming minimum. The company’s Vector Engine uses a proprietary co-processor design to hardware accelerate flash memory waveforms during the programming cycle. Faster speeds are achieved through synchronous operations that eliminate the dead times when the DUT waits on the programmer.
UTEC introduce Slim Line DC Brushless Blower Fans to fit into lowprofile applications. The blowers provide maximum air performance with its dual intake type frame and it is suitable for Note Book, A4 size Laptop, PDA Mobile Devices and any other low profile applications.
Anderson Power Products introduced the Powerpole and SB Multipole connector families which feature modular, interchangeable, color-coded and genderless housings. The Powerpole connectors are available in a variety of amperage ratings, from 15A to 180A, for use through 600V continuous, AC or DC operation. Molded dovetails provide a unique keying feature, preventing misconnection with different connectors. Also offered are the compact and robust PCB contacts, for a wire to board connection.
DIRAK introduced a flush design stainless steel swinghandle for applications where corrosion resistance is important. From the inside, the internal components of the swinghandle are protected by a stainless steel, screw-on cap. From the outside, the locking cylinder is protected by a stainless steel dust cover to prevent dirt, moisture and other elements from damaging the locking mechanism. This stainless steel swinghandle can be used with 3-point latching systems for larger enclosure doors and meets IP65 standards for water and dust resistance. The flush design of this stainless steel swinghandle and the tight gap between the handle and its housing offers protection from the threat of vandalism. Pry points have been minimized and the flushness of the swinghandle makes it difficult to use as a climbing aid.
Pepperl+Fuchs introduces Rhino AC/DC cube-style inductive proximity sensors. These two-wire AC/DC sensors are available with a 20 mm sensing range and are rated for 20-250V AC/V DC operation and are suitable for automotive manufacturing. The sensors are flush mountable and feature a coated die-cast housing and durable thermoset plastic sensing face for long life and reliable operation. These sensors also feature a five-way quick pivot sensing face for operational and mounting flexibility, as well as two corner LEDs for
MEN Micro Inc. released an M-Module featuring four grounded voltage or current channels that provide exceptional analog output functionality. The four channels of the M37N, feature an acquisition time of <8.5 µs, can be individually adjusted as well as updated automatically and simultaneously. This makes it suitable for applications requiring high-speed data acquisition, desirable timing resolution and precise measurement found in automated test environments, process control systems
High-Intensity Power SMD LEDs in CLCC6 Ceramic Package With Low Heat Dissipation and Optical Efficiency up to 35 lm/WAugust 24, 2007 5:33 am | Comments
Vishay Intertechnology, Inc. released a series of high-intensity yellow, amber, and white power SMD LEDs in the CLCC6 ceramic package. The VLMx61 series offers a very low thermal resistance and high optical power for thermal-sensitive applications. The CLCC6 ceramic package of the VLMK61, VLMY61, and VLMW61 devices allows the additional current drive for a maximum light output while maintaining a high service life of up to 50,000 hours.
Kycon introduces the KPJX-PM series DC power connectors, allowing for greater design flexibility. The series is available as a 3-pin or 4-pin option and as a shielded or unshielded shell. The panel mount is offered as a mounting ears feature that provides secure panel attachment. It has a snap and lock feature that helps to prevent accidental disconnects.
State-of-the-art ARCA enclosures are manufactured using injection molded polycarbonate, a high performance plastic, and offer ease of customization, robustness, chemical resistance, and wide temperature range. Available NEMA 4X rated with screw or hinged covers plus latch options. Standard interior enclosure sizes range from 6.00" × 6.00" × 4.00" up to 14.00" × 12.00" × 7.00". The stylized cover features an overlapping design providing desirable protection of the formed-in-place polyurethane (PUR) gasket.
Elma Electronic Inc. introduced the MicroBox 1U MicroTCA backplane device. The MicroBox has up to 10 modules and is 45 mm × 465 mm × 210 mm. Its module bays accept single or double modules and full, mid-, and compact sizes. Cooling is also a critical element in MicroTCA solutions. The side-to-side cooling configuration of the MicroBox does not have any bends in the airflow path.
OKW have extended their ergonomically shaped ‘ART-CASE’ series with twelve additional models designed for modern indoor electronics. Typical applications will include transmission and reception units in building services, medical equipment, peripherals and security devices. The models include screw-on access plates on the base section, providing easier access to the battery compartment to replace the cells, or access to the electronics for servicing and calibration
Bud Industries Inc. announced its first stackable plastic electronics enclosure. The Plasticase Style H enclosures has an interlocking design that allows them to be stacked several high without slipping. Applications include metering and monitoring, test equipment, controllers, lab equipment, medical equipment, and as an alternative to 19" racks.
Magmotor’s compact high performance 8 pole brushless DC motor is suited for unmanned vehicle and HEV systems for hydraulic pumps and power steering systems, packaging equipment, and other automation applications where high torque to weight ratio and efficiency are important. The motor is capable of 40 percent more torque than typical 4-pole servo motor configurations enabling it the ability to solve more demanding applications in less space. The design produces a continuous torque of
Texas Instruments introduced two video switches for digital video interface (DVI) or high definition multimedia interface (HDMI). The devices connect two or three digital video signals coming from devices such as game consoles, digital video switch boxes, set-top boxes or DVD players to a single HDTV display. Both the TMDS351 three-port switch, and the TMDS251, two-port switch integrate four transition minimized differential signaling (TMDS) channels
Pickering Interfaces introduced the 40-566, a 2A 2 pole switch matrix based on the BRIC architecture. The module is available in a variety of 2 pole matrix configurations ranging from 55 × 4 to 385 × 4. Each version supports 2A hot switching and voltages up to 250V AC. The integrated backplane arrangement maximizes the matrix BW and ensures users have a fully configured product with no need for terminal blocks that need time consuming wiring. The 40-566 is supplied with VISA and IVI drivers and