Advertisement
Product Releases
Subscribe to ECN Magazine Product Releases
View Sample

FREE Email Newsletter

ECN Daily

IC Employs Timing Generators for SETS Apps

September 4, 2008 9:19 am | Comments

Providing hitless reference and master/slave switching support with a SyncLink cross-couple data link, Connor-Winfield’s STC5230 synchronous clock IC uses 2 independent timing generators, T0 and T4, that include a digital phase-locked loop (DPLL) in Freerun, Synchronized, and Holdover modes with programmable loop bandwidth of each DPLL from 90 mHz to 107 Hz. The ITU-G.813- and Telcordia GR1244 and

Dual Band Antennas Handle 50 W

September 4, 2008 7:44 am | 3M Electronics Solutions Division | Comments

Utilizing a RG58 cable with a U/V stable polypropylene radome and 3M VHB Series 2-sided adhesive gasket, Astron Wireless Technologies’ LP8319H, LP8615H, LP8619H, LP9119H and LP9219H dual band antennas present a power handling capability of 50 W. The 4.50” OD × 1.06” H devices offer vertical polarization with a

Foot Switch Eliminates Stress

September 4, 2008 5:19 am | Comments

Having a cast aluminum cover, Linemaster Switch’s Linemaster Junior foot switch is said to eliminate lower leg stress and pain after many hours of usage while standing or sitting. The device is suitable for applications including communication equipment, conveyors, terminal application equipment, computer software programs and

Advertisement

MCU Yields Low Current Consumption

September 3, 2008 11:35 am | Comments

Running off of a 32 kHz oscillator, Freescale Semiconductor’s MC9S08QE32 8-bit MCU demonstrates current consumption of less than 7.3 mA on an operating voltage range from 1.8 V to 3.6 V. The device exhibits 2 low-power stop modes, low-power run and wait modes, clock gating registers to disable clocks or unused peripherals and

Air Flow Sensors Utilize Digital Display

September 3, 2008 9:49 am | Comments

Verifying flow rate, direction and output condition, Panasonic Electric Works’ FM-200 Series SUNX air flow sensors integrates a two-color dual digital display to show this data. The devices offer bi-directional flow detection of

Transformers Perform in Harsh Environments

September 3, 2008 7:51 am | Comments

Meeting international specifications for harsh environments, Datatronics’ 4283-1200 and 4283-1250 Series transformers operate in line and portable medical devices, such as defibrillators, industrial lasers, ion generators for powder coating and painting equipment, cathode ray tube transformers and traveling wave tube transformers. The flyback

TOPICS:

Video Capture Card Targets Surveillance Systems

September 3, 2008 5:12 am | Comments

Storing multiple input video feeds for later review and analysis, BVM Limited’s MP-6010 mini-PCI and PCI video capture card works in security and surveillance video systems. The component offers 4-channel video and audio inputs with independently-configurable compression parameters, a single video and audio output channel, and programmable

VCO Presents Low Phase Noise

September 2, 2008 11:22 am | Comments

Running in frequency ranges from 200 MHz to 239 MHz, Crystek’s CVCO55FL-0200-2039 VCO exhibits a typical phase noise of -123 dBC/Hz at 10 KHz offset. The 0.5” × 0.5” SMT-packaged component offers typical output power of 9 dBm, input voltage of 5 V and a control voltage range from 0.5 V to 4.5 V. The oscillator

Advertisement

Backplane Uses Star Routing Topology

September 2, 2008 9:32 am | Comments

Complying with VITA 41.0 specifications and the VITA 38 specification for system management, Elma Bustronic’s 8-slot VXS backplane utilizes a Star routing topology and backplane simulation for signal performance. The 6U-high device includes

Load Switches Demonstrate Voltage Protection

September 2, 2008 6:34 am | Fairchild Semiconductor | Comments

Operating with an input voltage range from 1.8 V to 5.5 V, Fairchild Semiconductor’s FPF22xx Series IntelliMAX load switches include undervoltage lockout (UVLO), thermal shutdown and current limiting. The J-STD-020- and RoHS-compliant components offer

Power Supplies Offer Universal Inputs

September 2, 2008 5:34 am | Comments

Working with 120 VDC to 370 VDC supplies, RECOM Electronic’s RAC-SB Series of 5 W and 10 W single-output AC/DC power supplies exhibit universal inputs ranging from 90 VAC to 264 VAC. The 2” × 1” encapsulated PCB mount or panel mount devices present five output voltage options ranging from 3.3 VDC to

Potentiometers Demonstrate Low Resistor Tolerance Error

August 29, 2008 7:25 am | Analog Devices, Inc. | Comments

Designed for open-loop applications, Analog Devices’ AD529x family of single-channel 10-bit programmable digital potentiometers offer less than 1% end-to-end resistor tolerance error over a supply voltage of ±15 V. The 14-lead TSSOP-packaged products use the iCMOS modular manufacturing process to combine CMOS and bipolar technologies to enable the device to support dual power supplies in the ±10.5 V to

AC/DC Switching Supplies Comply with EN55022 Standards

August 29, 2008 6:09 am | Comments

Operating in medical instrumentation and commercial-grade industrial control and telecommunications systems, Astrodyne’s EFM30 and EFM30/M Series modular AC/DC switching supplies meet EN55022, Class B standards for EMC noise performance. The 3.41” × 2.36” × 0.93” devices exhibit universal input acceptance from 90 VAC to

TOPICS:
Advertisement

Power Supplies Deliver 1,500 W Loads

August 28, 2008 12:02 pm | Comments

Operating with full load convection cooling from 0°C to ~45°C, DongAh Elecomm’s PSU-750 Series of 750 W switching power supplies demonstrates 1,500 W peak load capability for up to 5 minutes. The 13.38” × 4.570” × 1.970” open frame components include universal AC input with active power factor correction

Transceiver ICs Integrate Microprocessor

August 28, 2008 10:41 am | Comments

California Eastern Laboratories’ ZIC2410 Series of ZigBee transceiver ICs combine a ZigBee-compliant RF transceiver with an 8051-based 8-bit microprocessor. The QN48- or VFBGA72-packaged devices offer a receiver sensitivity of -98 dBm, link budget of 106 dB and maximum output power of 8 dBm. The system-on-chip

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading