Designed for Hi-Rel applications such as military, industrial, and railway, COTS Compact PCI power supplies from Digital Power meet MIL-STD-810 and can operate at temperatures from -5°C to 55°C. Available inputs include 100 VAC to 240 VAC at 60 Hz or 400 Hz, as well as 18 VDC to 72 VDC (48-V & 24-V models). The cPCI COTS family requires no minimum load
Using a card edge interface and a vertical or right angle insertion, respectively, Molex’s EdgeLine family of edge card and coplanar connectors maintain high-speed signal transmissions. The MicroTCA-compliant card units offer differential performance of up to 12.5 Gbps, a 0.800-mm terminal pitch, accommodation for 1.57-mm and
Providing 1 MCH and 5 AMC slots, the EcoBox MicroTCA system platform from Elma Electronic uses an active 3.3 V backplane management system with features such as inrush current control and overcurrent protection. The platform uses a standard 300-W ATX power supply, with direct SATA connections
Based on the X7R material, Epcos’ E-series multilayer ceramic capacitors (MLCCs) demonstrate typical ESD levels of 18 kV (0603/10 nF), 9 kV (0805/1 nF) and 25 kV (0805/10 nF) to AEC-Q200. The components offer sizes of
Presenting an auto-ranging AC input, LHV Power’s LHV-45 Series 45-W electrostatic air/oil cleaner power supplies exhibit an output voltage range from 1 kVDC to 30 kVDC. The fully-encapsulated units demonstrate constant voltage, constant power, and constant current operation. The devices include convection-cooled operation, overcurrent/short-circuit/arc protection circuits, AC OK/DC OK indicators, and voltage and
Coming in a standalone one-box test set, Agilent Technologies' N9360A mobile station tester provides support for network emulation and GO/NO GO test capabilities. The instrument tests the parametric and call processing performance of GSM/GPRS/E-GPRS, W-CDMA, HSDPA, cdma2000, and 1xEV-DO mobile phones. Applications include
Able to provide an output of up to 30 mA, the AS1302 DC/DC inductorless boost converter from austriamicrosystems requires only two =220-nF flying caps and two =2.2-µF bypass capacitors. The 1.2-MHz device accepts an input from of 2.9 V to 5.15 V and delivers an output of 5 V with an efficiency of up to 99% in 1:1 mode and up to 90% in 1:2 or 2:3 mode.
Providing an evaluation resource for the designer, the GB-LED1 LED Design Kit from JKL Components contains SMT and right-angle LEDs, rigid bars and flexible strips for linear lighting and LCD backlighting, high-power 1-3-5 Watt output for general lighting, and incandescent replacement styles such as festoon and wedge based.
Combining the functionality of a photoelectric sensor and a vision sensor, Banner Engineering’s iVu SeriesTG image sensors allow users to apply and support inspections on the factory floor without the use of a PC. The products offer integrated or external lighting (red, blue, green, or infrared options), a 68.5-mm (2.7") LCD touchscreen display, a 752 × 480 CMOS imager, and a software emulator to program the unit offline and load parameters using
Integrating 4 1-W LED dies into a single assembly for solid state lighting applications, OPTEK Technology’s OV4Z Optimal IV Star Series star-shaped LED assemblies present a thermal resistance of <2°C/W from junction to heatsink. The devices offer emitted colors of blue (455 nm to 460 nm), green (530 nm to 535 nm), red (620 nm to 630 nm), amber (585 nm to 595 nm), and daylight white. Typical forward voltage at
With thermal conductivity of 6 W/mK and thermal impedance of just 0.05 Kin.²/W, Keratherm U 90 thermal interface material from MH&W International has a voltage breakdown property of 4 kV. It provides perforation protection with a tensile strength of 2.500 N/mm² and a Shore A hardness of 70. The material is available in 0.100 mm and
Accepting an input frequency from 0.85 GHz to 8.0 GHz, the Crystek Pocket Passive Doubler (CPPD) series of frequency multipliers from Crystek Microwave feature an input drive level of 10 dBm to 20 dBm with a typical conversion loss of 15 dB for the CPPD-0.85-2.0 and 13 dB for the CPPD-2-4. Maximum output power rating for the CPPD line is 27 dBm, with an operating temp
Built with TPMOV surge suppression technology, Ferraz Shawmut’s new Surge-Trap surge protective devices (SPDs) comply with the UL 1449 Third Edition standard. The units exhibit modular-style IP-20-grade “finger-safe” protection, and mounts on a DIN rail to safeguard critical electrical system components from transient overvoltage effects. The devices suit system voltages from 120 V to 600 V, and are MCOV rated from
Measuring up to 26.2’ (8 m), Gems Sensors & Controls' UCL-520 Series ultrasonic level sensors are suitable for non-contact fluid applications, such as industrial water treatment, wastewater management, and chemical storage. The two-wire ultrasonic transmitter offers a PVDF transducer, a 8” min. dead band, a 3” min. beam width, and a selectable display indicating levels in air gap or liquid height. The device is push button calibrated with
Using common wire gauges in cable lengths up to 10 meters, FCI’s DensiShield I/O links exhibit 10 Gb/s per channel differential performance. The differential performance can be achieved at 6 meters or less by utilizing 30 AWG cable, at 8 meters or less by utilizing 28 AWG cable, and at 10 meters or less by utilizing 26 AWG cable. The devices meet the 10GBase-CX4 Ethernet and Infiniband industry standards. The products accommodate