Advertisement
Product Releases
Subscribe to ECN Magazine Product Releases

CPLDs Serve Handheld Designs

December 23, 2008 6:10 am | Comments

Based on ispMACH 4000 CPLD architecture, Lattice Semiconductor’s ispMACH 4064ZE and ispMACH 4128ZE CPLDs (complex programmable logic devices) target high-volume, handheld designs. The 6-mm × 6-mm devices exhibit typ. standby current of 10 µA, a nominal 1.8-V power supply with operation down to 1.6 V, Power Guard dynamic power reduction, and per pin pull-up, pull-down, or bus keeper control; an on-chip user oscillator and

Digital Voltmeters Perform in Harsh Environments

December 23, 2008 5:46 am | Murata Power Solutions Inc. | Comments

Exhibiting readability in daylight via a 3.5-digit red LED display, Murata Power Solutions’ DMU-30ACV and DMU-30DCV Series of panel-mount digital voltmeters operate in inverters and generators, battery chargers, power distribution units, and power supplies in the industrial, test and measurement, alternative energy/back-up power, and marine markets. The 85-VAC to 264-VAC mains or 110-VDC to 300-VDC battery-powered

Programmable Power Supplies Deliver 4,920 W

December 23, 2008 5:28 am | Comments

Operating in for industrial, military and medical instrumentation applications, Emerson Network Power's Intelligent VS (iVS) fully-programmable AC/DC power supplies deliver up to 4,920 W of 12-W/in³ output power. The devices utilize digitally-configurable single- and dual-output power supply modules available in six power ratings from 210 W to 1,500 W. The instruments support 24 different outputs from 2 V to 60 V, and are

TOPICS:
Advertisement

Pushbuttons Show Tamper Resistance

December 23, 2008 5:13 am | Comments

Having combined solder lug and 0.11” quick connect terminations, NKK Switches’ YB2 Series 22-mm pushbutton switches possess tamper resistance in medical equipment and industrial and commercial control panels. The UL94V0-rated devices exhibit a dust-tight and splash-proof panel seal design to protect against low-pressure water jets from all directions and meet IP65 of IEC60529 standards. The cULus-recognized

TOPICS:

Industrial Cam Latches Come in Different Designs

December 23, 2008 4:45 am | Comments

Performing in electrical enclosures, transportation equipment, recreational vehicles, office furniture, HVAC, and vending applications, Southco’s E5 Series industrial cam latches offer integrated L-handle, T-handle, and flush wing knob designs. The modular E5 latch format includes multiple interchangeable cams to satisfy grip dimension requirements from 4 mm to 42 mm. The L-handle and T-handle designs present single-hole installation secured by

TCXO Demonstrates Tight Stability

December 23, 2008 4:29 am | Comments

Functioning over a frequency range from 50 MHz to 120 MHz, Tellurian Technologies’ TT2200 TCXO exhibits an overall frequency stability of ±4.6 ppm and stability of ±0.5 ppm over an operating temperature range from -40°C to 85°C. The 20-mm × 13-mm × 5.7-mm component presents a CMOS output waveform, an input

SSLDs Exhibit Double Dimming Function

December 23, 2008 4:08 am | Comments

Powering LCD backlights, ROHM Electronics’ BD6095GUL Series SSLDs use an I/F-compatible backlight dimmer with a double dimming function, analog output sensors, and an integrated I²C bus interface. The double dimming function adjusts brightness based on image content and ambient conditions. The units possess a gain control function with a built-in light measurement range; a backlight adjustment function linked with

Counterfeit IC Detector Covers Multiple Package Types

December 22, 2008 9:03 am | Comments

Coming in a desktop case with separate interchangeable PCBs for accepting the ICs under test, ABI Electronics’ SENTRY counterfeit IC detector tests integrated circuits in DIL, SOIC, PLCC, QFP, and BGA packaging. The device uses PinPrint test analysis that takes place in the background, and shows a “Good Device”, “Blank Device”, or

Advertisement

Matrix Routing Switcher Offers Remote Capability

December 22, 2008 8:41 am | Comments

Exhibiting front panel operation, Sensoray’s 2444 HD SDI matrix routing switcher allows for remote capability while remaining operating system independent via a built-in, customizable Web page. The instrument is capable of switching SMPTE 292M and SMPTE 259M from any of the four inputs to any of its four outputs. An automatic reclocking and

Instrument Case Exhibits Two-Piece Clamshell Configuration

December 22, 2008 8:09 am | Comments

Having an extrusion-based modular design, Elma Electronic’s Type 33 modular instrument case comes in a two-piece clamshell configuration to allow access to the interior. The enclosure offers standard, EMC, and compact styles. The chassis includes mounting panels and grooves, and optional tilt-up feet and carrying handle. The screws to

HCMOS Oscillators Operate Over Wide Frequency Range

December 22, 2008 7:01 am | Comments

Exhibiting a footprint of 2.5 mm × 2 mm, Fox Electronics’ F210 Series 1.8-V HCMOS oscillators demonstrate input currents from 2.5 mA to 5 mA across a frequency range from 0.75 MHz to 50 MHz. The devices offer current consumption of 10 mA and stabilities from ±25 ppm to ±100 ppm across an operating temperature range from

MOSFET Driver Supports Voltages up to 28 V

December 22, 2008 6:32 am | Comments

Supporting voltages up to 28 V, the AAT4910 half-bridge, dual MOSFET driver from AnalogicTech is billed as featuring the industry’s lowest impedance in its class for multiphase DC-DC converters. With a 3-Ohm drive resistance, the driver is powered from a 5-V rail. When driven low, the enable input turns off the driver and reduces

Rear-Projection Display Supports HD Resolution

December 22, 2008 6:22 am | Comments

Targeting public venue video walls and space-constrained control rooms, Planar Systems’ Clarity Margay II 50” rear-projection display offers support for full 1920 × 1080 HD resolution. The product includes Texas Instruments’ DLP BrilliantColor technology, the Margay II optical engine with primary and secondary color segments, and Planar Precision electronics with digital uniformity correction and solid state image alignment. The display uses

Advertisement

Pushbutton Switch Offers Snap-in Mounting

December 22, 2008 6:19 am | Comments

Offering snap-in mounting options, the BSP Series subminiature momentary pushbutton switch from CIT Relay & Switch offers a choice in of silver-plated, gold-plated, or gold over silver-plated contacts. Specifications: Electrical rating is 3 A @ 120 VAC and 28 VDC, 1 A @ 250 VAC. Typical electrical life is 30,000 cycles

Front-End Power Supplies Controls Output Digitally

December 22, 2008 5:54 am | TDK-Lambda Americas, Inc. | Comments

Employing an 8-bit MCU, TDK-Lambda's EFE Series embedded front-end power supplies delivers digital control of the output via a primary side control topology. The 300-W EFE-300 and the 400-W EFE-400 single-output instruments supply 133% peak power capability for 10 seconds, exhibit efficiency of up to 90%, and offer nominal outputs of

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading