Advertisement
Product Releases
Subscribe to ECN Magazine Product Releases

Fan Tray Includes Replaceable Filter

January 5, 2009 9:42 am | Comments

Designed to mount directly into a 19” cabinet, the OMB5200-120 Series dual-fan tray blower assembly from Orion Fans has a cleanable/replaceable aluminum mesh filter. The 3U tray delivers 340 cfm of directed airflow with a noise level of 57 dB. Options include adding a thermistor control, a tachometer output, a PWM input, a constant

Driver/MOSFET Module Boasts High Efficiency

January 5, 2009 8:15 am | Renesas | Comments

Integrating two high-side/low-side power MOSFETs and a driver circuit in a 6-mm² 40-pin QFN package, the Renesas R2J20651NP can operate at an efficiency as high as 96.5 percent. Able to produce an output from 0.8 VDC to 5 VDC from a 4.5-VDC to 16-VDC input, the 35-A device runs at a max operating frequency of 200 MHz and

GaN HEMT Microwave Transistor Supplies 120 W

January 5, 2009 7:24 am | Comments

Consisting of a single unmatched GaN HEMT die, Cree’s CGH40120F GaN HEMT microwave transistor delivers a minimum saturated output power of 120 W at 28 V. The component performs in general-purpose military and industrial applications, such as electronic warfare, tactical communications, radar, instrumentation, and

Advertisement

Automatic Fallback Switch Presents Remote Access

January 5, 2009 7:09 am | Comments

Using 10/100-Base-T connection and either Telnet commands or a GUI, Electro Standards Laboratories’ Model 7339 Cat5e RJ45 A/B automatic fallback switch can share one workstation or device among two other devices connected to the

Pulse Shaping/Measurement Systems Switch Between Measurements

January 5, 2009 6:33 am | Comments

Implementing autocorrelation, FROG, XFROG, and single-shot SPIDER measurements, Fastlite’s Phazzler pulse shaping and measurement systems can switch between a FROG and a SPIDER measurement by clicking a button without switching the optical alignment. The devices integrate an AOPDF or turn key Dazzler pulse shaping system with its associated RF arbitrary waveform generator and its acousto-optic crystal. The instruments

Filter Media Meets UL 94

January 5, 2009 6:06 am | Comments

Operating in medical, power-gen, military electronics, telecom and filter applications requiring flame safety and dust arrestance, Universal Air Filter’s 0.12” Quadrafoam filter media complies with the UL 94 HF-1 rating. The compressible product is available in 45 ppi, 60 ppi, and 80 ppi (pores per inch). The media can be bonded to interior chassis walls for insulation or circuit card stabilization purposes. The RoHS-compliant product also meets

TOPICS:

ESD Protection Arrays Offer Low Capacitance and Leakage Current

January 5, 2009 5:48 am | Comments

Protecting high-speed data lines against transient voltage signals, Vishay Intertechnology’s 2-line VBUS052CD-FAH and 4-line VIS054CD-FHI ESD protection arrays exhibit a load capacitance of 0.8 pF and max. leakage current of <1 µA at a working voltage of 5 V. The 0.6-mm high components present a typ. breakthrough voltage of

AC/DC Rocker Switches Resist Water

January 5, 2009 5:23 am | Comments

Having IP56 certification, Cherry Electrical Products’ KS, KG, KT, and KM Series AC/DC rocker switches suit panel-mount applications in which the switches will be exposed to dust and water. The KS devices exhibits a current rating of 16 A at 125 VAC, while the KG, KT, and KM units are rated at 20 A at 125 VAC. The products offer a current rating of 21 A at 14 VDC, UL approval on AC loads, and 0.25” (6.35-mm) quick-connect tab

Advertisement

Temperature Sensors Measure Substrate Diodes

January 5, 2009 5:07 am | Comments

Targeting notebook PCs, servers, and industrial and embedded systems, SMSC’s EMC141x and EMC107x families of temperature sensors measure the temperature of a substrate diode found on GPUs, CPUs, FPGAs, or ASICs. The devices incorporate automatic beta compensation that detects the requirements of a thermal diode and self-configures the measurement attributes. The components have resistance error correction that adjusts

Power Supplies Target Medical Engineering Apps

January 5, 2009 4:39 am | Comments

Receiving CB-Scheme and VDE approval acc. to EN 60 950-1 and EN 60 601-1, MTM Power’s PMmed and PCMDmed48 Series primary-switched power supplies serve Class 1 and Class 2 medical engineering applications. The CE-compliant modules exhibit an output power of 48 W, single output voltages 5 VDC, 12 VDC, 24 VDC, and

TOPICS:

Industrial-Grade Supply Delivers 175 W

December 31, 2008 10:36 am | Comments

Using a resonant topology, the CLC175 single-output open-frame AC/DC power supply from XP Power can deliver up to 175 W. The 3” × 5” × 1.25” device has a power density as high as 9.3 W/in.³ and an efficiency as high as 87 percent. Only 10 cfm of forced airflow is required for full power, and a 12-VDC 0.5-A fan output

Integrated Switch and Schottky Diode Boost Regulators Offer Wide Input Range

December 31, 2008 8:42 am | Comments

Micrel introduced the MIC2605/6, two wide-input range integrated switch and Schottky diode boost regulators operating at 1.2 MHz (MIC2605) and 2 MHz (MIC2606).  Both devices supply up to 0.5 A switch current. The devices, which complement the company's MIC2601/2 family, are

Circular Connectors Withstand up to 5 PSI

December 31, 2008 8:04 am | Comments

Maintaining 0.050 contact spacing, miniature circular connectors from ITT Interconnect Solutions withstand up to 5 PSI. The connectors meet IP68 standards and all insulator and contact areas within the connectors are sealed against environmental elements. The 37-pin connectors feature a twist pin contact system

Advertisement

VCO Operates From 2,770 to 2,920 MHz

December 31, 2008 7:58 am | Comments

With a typical phase noise of -106 dBc/Hz @ 10KHz offset, the Crystek CVCO55CC-2770-2920 VCO (Voltage Controlled Oscillator) operates from 2,770 MHz to 2,920 MHz with a control voltage range of 0.5 V to 4.5 V. Output power is typically +4 dBm.

Line Driver Cables Serve Modular Encoders

December 31, 2008 7:51 am | Comments

Designed to be used with the AMT series of modular encoders, a family of line driver cables from CUI measure approximately 1 m and have an operating temperature of -40°C to 85°C. Available with an on-board line driver chip (model ST26C31BDR) to convert the TTL signal to a line driver output

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading