Product Releases
Subscribe to ECN Magazine Product Releases

Supplies Target General Apps

April 15, 2009 5:20 am | TDK-Lambda Americas, Inc. | Comments

Available in versions providing most popular output voltages including 3.3 VDC, 5 VDC, 12 VDC, 15 VDC, 24 VDC, 36 VDC and 48 VDC, the 25-W LS25 and 35-W LS35 families of enclosed single-output AC/DC power supplies operate with an input from 88 to 264 VAC at 47 to 63 Hz.

Monitor/Controller Includes Four Limit Switches

April 14, 2009 1:38 pm | Comments

The MAP 4000 Series monitor/controller from Novotechnik includes up to four limit switches. It can perform up to 40 measurements/sec. The Series’ limit switches are programmable and operate via relays. The inputs are also programmable for potentiometers, DC voltage, current/voltage, resistance, and temperature sensors

Digitizers Feature up to 4 GS/s Sampling

April 14, 2009 1:34 pm | Comments

The CobraMax family of ultra high-speed 8-bit digitizers from GaGe features up to 4 GS/s sampling and 4 GSamples of on-board memory. The digitizers are available with 1 or 2 digitizing channels and up to 1.5 GHz of input bandwidth. Other features include: Reference Clock In and Clock Out


Notch Filter Covers Television Broadcast Band

April 13, 2009 1:04 pm | Comments

Said to provide a high level of signal rejection, the Model S2065 notch filter from Anatech Electronics is for use in the television broadcast band (Channels 62 to 68). The filter has 3-dB passbands of DC to 750 MHz and 850 to 1200 MHz, rejection at 800 MHz to 806 MHz greater than 70 dB

Logic Circuits Provide Clock Rates up to 26 GHz

April 13, 2009 1:00 pm | Comments

Intended for deployment in optical systems, ATE, broadband test and measurement equipment, frequency synthesis, and radar signal processing systems, six pin-compatible industry replacement high speed logic products from Hittite Microwave provide operating clock rates up to 26 GHz

Wireless Interface Lets Encoders Communicate

April 13, 2009 9:29 am | Comments

Working with any of the company’s sensors, encoders, or magnetostrictive devices, the SwiftComm Wireless Interface from BEI Industrial Encoders attaches directly to the SSI port in the controller, just like a conventional wired system.

N-Channel JFET Chip Integrates Back-to-Back Diodes

April 13, 2009 5:59 am | Comments

Targeting applications such as hearing aids, miniature microphones, and battery-powered amplifiers, the IFND89 N-Channel JFET chip from InterFET has integrated back-to-back diodes.

Powered Exoskeleton Unveiled by Cyberdyne

April 13, 2009 5:53 am | Comments

Cyberdyne Corporation of Japan, in conjunction with Daiwa House, has begun mass production of a cybernetic bodysuit that augments body movement and increases user strength by up to tenfold.


USB Datalogger Includes LCD

April 13, 2009 5:39 am | Comments

Able to record and store over 16,000 temperature readings from -35 to +80ºC and over 16,000 relative humidity readings from 0 to 100% at user-selected sample rates, the EL-USB-2-LCD standalone USB datalogger from Lascar Electronics has a 2½-digit LCD to indicate minimum, maximum, and last stored temp/RH readings.

Cable Assemblies Feature 100 db of Shielding

April 10, 2009 11:40 am | Comments

Hand-formable cable assemblies from Electronic Assembly Manufacturing (EAM) use a copper-tin composite outer conductor to achieve shielding effectiveness of more than 100 dB. The cable assemblies provide typical insertion loss of 0.7 dB/ft. at 20 GHz for a 0.141-in. diameter cable. Typical VSWR is 1.13:1 @ 18 GHz

I/O Cube Compatible With 30+ Board Types

April 10, 2009 11:32 am | Comments

Available in two models — a 3-I/O layer (5-slot PPC5-1G) or a 6-I/O layer (8-slot PPC8-1G) — the PowerDNA PPCx-1G Gigabit Ethernet I/O Cube from United Electronic Industries (UEI) is compatible with all 30+ UEI I/O board types. The 6-layer model (PPC8-1G Cube) can provide up to: 150 analog inputs, 192 analog outputs, 288 digital I/O

Integrating Sphere Light Source Delivers Wide Output

April 10, 2009 4:59 am | Comments

Providing a uniform and adjustable hemispherical light output for calibration applications, the Gigahertz-Optik’s model ISS-8K-100-VAHP integrating sphere light source boasts uniformity within its 19-mm diameter light output port area equal to or better than 98% within 90% of the port diameter.

POL DC-DC Concerters Output up to 39 W

April 9, 2009 12:44 pm | Comments

A series of non-isolated point of load (POL) dc-dc converters from FDK feature up to 39 W of output power. The converters deliver up to 6 Amperes (A) of output current at power densities up to 860 Watts/cubic inch in an SMD package, and up to 4 A of output current at power densities up to 760 Watts/cubic inch in an SIP package


Epoxy Impregnant Seals Metals & Nonmetals

April 9, 2009 12:38 pm | Comments

The Master Bond EP19HT adhesive/sealant, impregnant, and liner seals both metals & nonmetals. Its viscosity is 500 cps-600 cps at 75°F. Recommended cure is 1 hour at 250°F. Shorter cures can be achieved at temperatures between 325°F-350°F. EP19HT is a 100% reactive system, containing no solvents or diluents

Solid-State Relays Achieve High Power Density

April 9, 2009 6:48 am | Comments

Using an improved mechanical and thermal design, the Evolution Dual family of solid-state relays is rated for load currents up to 50 A/660 VAC per channel. Available with either zero voltage or random turn on, the RoHS compliant devices have IP20 "touch safe" covers and LED input status indicators.


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.