Advertisement
Product Releases
Subscribe to ECN Magazine Product Releases

Processor family presents higher performance with real-time processing

July 2, 2014 9:34 am | Texas Instruments | Comments

Texas Instruments (Dallas, TX) announced the new Sitara AM437x processor family that integrates support for industrial protocols for both automation and industrial drives and includes new features such as dual camera for data terminals with bar code scanning.

TOPICS:

Multilayer varistor designed for ESD protection

July 1, 2014 3:52 pm | Stackpole Electronics, Inc. | Comments

The ZVE Series from Stackpole (Raleigh, NC) is a low-capacitance, surface-mount multilayer varistor designed for ESD protection. High capacitance can distort or even block communications signals. Since the ZVE Series is a multilayer varistor, it is inherently bi-directional....

TOPICS:

Oscilloscopes integrate a deep measurement toolset

July 1, 2014 3:17 pm | Comments

Teledyne LeCroy (Chestnut Ridge, NY) has introduces the WaveSurfer 3000 series of oscilloscopes featuring the MAUI advanced user interface. This user interface integrates a deep measurement toolset and multi-instrument capabilities into a user experience centered on a large 10.1” touch screen....

TOPICS:
Advertisement

Multi-channel PXI-based test solution speeds LTE/LTE-Advanced waveform creation and analysis

July 1, 2014 10:34 am | Agilent Technologies | Comments

Agilent Technologies Inc. (Santa Clara, CA) announced the LTE/LTE-Advanced multi-channel PXI-based test solution, which is positioned to accelerate the setup of multi-channel test system configurations and enables engineers to gain deeper insight into complex carrier aggregation and…

TOPICS:

IO-Link transceiver includes integrated step-down regulator & LDO

June 30, 2014 4:13 pm | Linear Technology Corporation | Comments

The LT3669 from Linear Technology (Milpitas, CA) is an IO-Link PHY compatible (COM1/COM2/COM3) industrial transceiver that includes a high efficiency step-down regulator and a low dropout linear regulator. The device offers cable interface protection to ±60V....

TOPICS:

EMI/RFI filter sample kits suited for microwave applications

June 30, 2014 3:22 pm | Comments

CTS Corporation (Elkhart, IN), through its subsidiary CTS Tusonix, announces the release of two new sample kits of electromagnetic interference (EMI) and radio frequency interference (RFI) filters specifically suited for microwave applications. CTS compiled two “C” type kits, 4300-900 and 4306-900....

TOPICS:

Constant-current LED drivers meet demands of low-wattage intelligent lighting systems

June 30, 2014 2:10 pm | Sunpower UK | Comments

The LCM-25(DA) 25 W constant current LED power supply from Sunpower (Aldermaston, UK) allows designers to implement low-wattage intelligent LED lighting control systems and project style lighting designs. The LCM 25(DA) is the latest addition to the LCM series....

TOPICS:

Dust monitor detects particles as small as 0.3 µm

June 30, 2014 1:53 pm | Yokogawa | Comments

Yokogawa Corporation of America (Newnan, GA) announces the release of the model DT450G dust monitor. The DT450G detects the qualitative level of dust or particulate matter by working off of the principle of inductive electrification. This probe provides a highly sensitive measurement....

TOPICS:
Advertisement

Wireless power coils comply with the Qi standard

June 30, 2014 1:26 pm | Wurth Electronics Midcom, Inc. | Comments

Würth Elektronik (Watertown, SD) expands its Wireless Power Coil program with three transmitter coils and one receiver coil. The new round transmitter coils 760 308 100 110 (A10) and 760 308 100 111 (A11) comply with the Qi standard of the Wireless Power Consortium (WPC)....

TOPICS:

100G processor board is offered in AMC format

June 30, 2014 12:22 pm | Comments

VadaTech (Henderson, NV) offers an Advanced Mezzanine Card (AMC) processor with a CFP2 front panel port for 100G capabilities. The AMC738 Processor AMC features a Cavium Octeon II CN6880 multi-core processor and a Virtex-7 FPGA.

Capacitive sensing MCUs target HMI applications

June 30, 2014 11:01 am | Silicon Laboratories Inc. | Comments

Silicon Labs (Austin, TX) introduced energy-efficient capacitive sensing microcontrollers (MCUs) for human-machine interfaces (HMI). The new C8051F97x MCU family combines the company’s ultra-low-power technology with fast, accurate capacitive sensing to provide…

TOPICS:

Film capacitors offer snap-in terminals for easy PCB mounting

June 30, 2014 10:52 am | Avx Corporation | Comments

AVX Corporation (Greenville, SC) has launched the FRC Series medium power DC-link film capacitors, which feature a wide range of capacitance and voltage values in addition to self-healing properties. These capacitors…

TOPICS:

Plug Load Logger provides accurate equipment energy use data

June 30, 2014 10:40 am | Onset Computer Corp. | Comments

Onset (Bourne, MA) has announced the HOBO Plug Load Logger, an easy-to-deploy data logger that measures and records the power and energy consumption of 120-V plug loads from office equipment, vending machines, and other devices. The HOBO Plug Load Logger provides…

TOPICS:
Advertisement

Stepper motors present maximum power, minimal size

June 30, 2014 10:33 am | Comments

With the new FDM0620 Series, MICROMO (Clearwater, FL) presents a high performance FAULHABER stepper motor with minimal size.  All components (including connections) are in a housing that measures 9.7 mm in length and 6 mm in diameter.

TOPICS:

High-Speed CMOS DDR3 SDRAMs line offers 1-Gb, 2-Gb, and 4-Gb densities

June 30, 2014 10:04 am | Comments

Alliance Memory (San Carlos, CA) introduced a line of high-speed CMOS double data rate 3 synchronous DRAMs (DDR3 SDRAM) and low-voltage DDR3L SDRAMs with densities of 1 Gb, 2 Gb, and 4 Gb in 78-ball 9 mm by 10.5 mm x 1.2 mm and 96-ball 9 mm x 13 mm by 1.2 mm FBGA packages.

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading