Equipped with a 15.3 in, 16:9 display and a touch screen, the WavePro7 from Lecroy Corporation, is the first product series in the Zi Family of oscilloscopes. Operating with up to 6 GHz of bandwidth, the device can also be
Offering thermal management and pre-processing for sensor operation, Sony's BM-599CL and BB-500CL, are two versions of a five megapixel camera that are equipped with a Camera Link interface. Both models are built around the Sony ICX625 2/3" CCD sensor (2448 x 2050 pixels - QSXGA) and are mid-range cameras. Potential applications for the cameras include:
With the same 7 x 9-mm footprint as its single-emitter predecessor, the multi-chip XLamp MC-E LED integrates four emitters to provide up to 790 lumens at 6,000K and up to 605 lumens at 3,000K with an input power of 9.8 W. The devices are available in color temperature ranges of 2,600K to 3,700K, 3,700K to 5,000K, or 5,000K to 10,000K.
Meeting EMC noise performance requirements, Astrodyne’s ECA30 Series encapsulated switching power supplies accepts universal input from 90 to 264 VAC and provides output power of 30 W with single, dual, and triple outputs from 5 to 48 VDC. The RoHS 2002/95/EC-compliant devices operate over an ambient temperature range from -10°C to 50°C. The UL/EN60950-1-specified
Featuring second-generation model-based synthesis technology, the DSP Builder Version 8.0 fro Altera, increases productivity for DSP designs by an order of magnitude. This technology allows DSP designers to generate timing-optimized RTL code based on Simulink design descriptions. With this Builder feature, designers can acquire
With two system management buses (SMBus), Silicon Storage Technology’s SST89C58RC FlashFlex 8-bit microcontroller family supports up to 400 Kbps data throughput in each bus. The 6-mm2 QFN-packaged devices yield operating voltages from 2.7 to 5.5 V and 1 KB on-chip RAM. The microcontrollers
Designed to drive upper and lower power N-Channel MOSFETs in a synchronous converter, the LTC4447 from Linear Technology, can deliver 5A for buck or boost DC/DC converters. This driver, combined with power MOSFETs and one of Linear Technology's DC/DC controllers, forms a complete synchronous regulator that can be used as a step-down or step-up DC/DC converter. The device drives both
Housed in 1U-high aluminum cases and providing up to 450 W, the WL7 Series of switchmode power supplies from Acopian have a constant voltage/constant current crossover, and both voltage and current can be programmed with 0- to 10-V control voltages.
Supporting 1.8” form factor drives, FCI’s Micro serial ATA (SATA) plug connector have compatibility with applications such as notebook PCs, set-top boxes, game consoles, audio/video, and portable storage. The SATA-IO-standardized device meets SFF 2.6 specification with 16 positions (7 with a pitch for signal of 1.27 mm and 7+2 positions with a pitch for power of 1.27 mm). The RoHS-compliant
Using flexiFLASH architecture, Lattice Semiconductor’s LatticeXP2 family of non-volatile automotive FPGAs provides look up tables from 5 to 17 K, 276 Kb on-chip embedded FlashBAK RAM in 18 Kb dual-port blocks, and from 0.6 to 2.2 Kb of Serial TAG memory. The 90-nm devices support DDR2 memory interfaces at 400 Mbps, ADC/DACs at up to 750 Mbps and 7:1 LVDS display interfaces at above 600 Mbps. The AEC-Q100-standardized FPGAs support up to 5 sysDSP
Incorporating the recently PHY1040 laser transceiver and limiting amplifier IC and an off-the shelf 8-bit microcontroller with embedded flash, a hardware and software reference design from Phyworks can create Small Form-factor Pluggable 125 Mbps to 1.25 Gbps optical modules with digital configuration and monitoring capability. The system architecture allows users to configure the PHY1040 in software to meet specific optics and network requirements and
With a footprint 40% smaller than a standard SO-8 and a height of 0.7 mm, a family of 30-V DirectFET MOSFETs enable a smaller footprint and higher power density in synchronous buck converter designs. The IRF6724M, IRF6725M, IRF6726M, and IRF6727M have a common MT and MX footprint as previous generation devices
Including information such as emission patterns, the coordinates of the emission point, as well as the direction, intensity, and wavelength, an online database at www.osram-os.com/ray-files from OSRAM Opto Semiconductors provides ray data files for its entire LED portfolio. Engineers can immediately view and download all the ray data and a custom CAD model for board design
Ridding the need of data control cables, Intersil Corporation’s ISL34340 SERDES IC transports 27 bits of video data and bi-directional I2C into a single LVDS cable measuring up to 10 meters long. The 64-lead EPTQFP-packaged device has a DC balanced 8b/10b code and video flow that allows 24 RGB bits and three video control bits into a single LVDS pair. The IC includes embedded termination
OKW Electronics’ CAMDEN DIN-Rail enclosures are designed for snap-in mounting on DIN EN 50/022/035/045 (TS 35/32/15) rails or direct cabinet mounting. The devices are appropriate for applications including automation, building and safety, sensors, relays, and signal distributors. The enclosures can be used as a subrack for interfaces, electronics modules, amplifiers, or transformers. The cases offer different connection options for commercial components, such as terminals, PCB plug headers, or front connectors