Advertisement
Product Releases
Advertisement

Surface-mount chip resistors offer "R" level failure rate of .01 percent per 1,000 hours

Thu, 06/20/2013 - 11:19am

LISTED UNDER:

Vishay Intertechnology, Inc. launched a new series of QPL MIL-PRF-55342-qualified surface-mount chip resistors that provides established reliability with an "R" level failure rate of 0.01  percent  per 1,000 hours. Built using a moisture-resistant tantalum nitride resistive film technology, the new E/H (Ta2N) resistors offer enhanced specifications for military and aerospace applications, including tolerances to 0.1  percent and TCR of 25 ppm/°C.

The Vishay Dale Thin Film QPL resistors introduced today are intended for use in control systems for military and aerospace applications where moisture during operation or long-term storage may be a concern. The devices' tantalum nitride resistive film assures a moisture resistance level that exceeds MIL-PRF-55342 limits by a factor of 50.

The E/H (Ta2N) thin film resistors offer very low noise of less than -25 dB and a low voltage coefficient of 0.5 ppm/V. Their wraparound terminations feature a tenacious adhesion layer covered with an electroplated nickel barrier layer for +150 °C operating conditions, while contributing resistance of less than 0.010 Ω typical.

The devices are offered in 12 case sizes from M55342/01 to M55342/12, with power ratings from 50 mW to 1000 mW, working voltages from 30 V to 200 V, and resistance ranges from 49.9 Ω to 3.3 MΩ, depending on tolerance.

Production quantities of the E/H (Ta2N) thin film resistors are available now, with lead times of eight to 10 weeks. 

Vishay Intertechnology, Inc.
www.vishay.com

 

Advertisement

Share this Story

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading