Advertisement
Product Releases
Subscribe to ECN Magazine Product Releases

Servo Drives Supply 7 A

August 28, 2008 8:10 am | Comments

Measuring 5” × 3” × 1.75”, Applied Motion Products’ SV Series servo drives deliver up to 7 A rms continuous or 14 A rms peak output current from a 24 VDC to 80 VDC power supply. The devices provide 8 digital inputs, 4 digit outputs, 2 analog inputs and a RS232 or RS485 communication interface. The drives use a digital PID loop with

TOPICS:

Capacitors Operate at 200°C

August 28, 2008 7:03 am | Avx Corporation | Comments

Handling harsh and rugged operating environments, AVX’s SMX and CHX Series stacked ceramic capacitors perform in temperatures up to 200°C. The devices offer a maximum capacitance of 340 microfarads at 25 V and a maximum voltage rating of 500 V. The switch mode power supply capacitors are suitable for high transient

Pitch Connector Performs in Wide Height Range

August 28, 2008 6:03 am | Comments

Adding to the SMC 1.270 mm (0.500”) pitch connector line, ERNI Electronics’ SMC Board-to-Board-Adapter presents connectivity in board-to-board heights from 20 mm to 40 mm in 2 mm increments. The device has male contacts on both component ends and availability in 12, 26 and 50 pins to lock into a standard SMT

Advertisement

TVS Diode Demonstrates ESD Protection

August 28, 2008 5:06 am | Comments

Operating in ±5 V environments, OnChip Devices’ ESD0402-01FR single-channel TVS diode dissipates ESD strikes of ±8 kV contact discharge, in accordance to the IEC 6100-4-2 standard. The 0402-sized or 1 mm × 0.6 mm × 0.5 mm SMT DFN-2-packaged component

SBC Uses 512 MB of RAM

August 27, 2008 12:08 pm | Comments

Adding to the Hercules II EBX SBC family, Diamond Systems’ HRC800-5N512 SBC offers 512 MB of RAM on an 800 MHz VIA Mark CoreFusion processor while operating over a temperature range from -20°C to 70°C. The 5.75” × 8” (146 mm × 203 mm) component integrates a Pentium III-level CPU with or without data acquisition, and a DC/DC power supply. The computer

PROFIBUS Analyzer Integrates Oscilloscope

August 27, 2008 10:34 am | Comments

Translating PROFIBUS to USB and vice versa, Grid Connect’s ProfiTrace 2 PROFIBUS analyzer incorporates a digital oscilloscope to capture bus signals running at 12 Mbps, display them using the Bit Interpretation Engine, indicate a problem’s distance, and the option to show one device’s signals. The DP-V0/DP-V1 class 1 and 2 master uses the Live List statistics matrix to list all available devices and information including retry messages

Encoder/Decoder Shapes RS-232 Data Signals

August 27, 2008 9:12 am | Comments

Supporting data ranges from 1.20 kb/s to 115.20 kb/s, Vishay Intertechnology’s TOIM5232 encoder/decoder presents proper pulse shaping of RS-232 data signals for serial infrared (SIR) IrDA transceivers. The device shortens RS-232 output signals to IrDA-compatible electrical pulses to drive an infrared transmitter in transmit mode, and

Rotary Actuators Offer 15 Arc-Seconds Accuracy

August 27, 2008 8:01 am | Comments

Integrating a cross-roller bearing structure, Oriental Motor’s DG 200 Series hollow rotary actuators shows a repetitive position accuracy of 15 arc-seconds and a total backlash of 2 arc-minutes. With a frame size of 7.87” (200 mm) and an internal hollow diameter of 3.94” (100 mm), the RoHS-compliant components develop

Advertisement

Analyzer Tests Electro-Optical Components

August 27, 2008 6:24 am | Keysight Technologies | Comments

Having single or dual wavelength options at 1,310 nm or 1,550 nm, Agilent Technologies’ N4374B lightwave component analyzer (LCA) offers traceable electro-optical S-parameter testing for transmitters and receivers in CATV and Radio over Fiber applications. The device exhibits internationally-specified relative and

Evaluation Platform Enables Prototyping

August 26, 2008 10:36 am | Comments

Allowing DSP or processor aggregation, Tundra Semiconductor’s Tsi620 multi-standard RapidIO switch evaluation platform enables prototyping using Texas Instruments’ TMS320TCI6487 multi-core 3 GHz DSP with extendable cluster and an Altera Stratix III FPGA. The component offers communication with PCI-enabled microprocessors through a PMC connector, hardware bridging and leverage over XGMII. The platform includes

TOPICS:

Power Supplies Use Voltage-Versus-Current Output

August 26, 2008 7:52 am | Comments

Phoenix Contact’s STEP Series of general-purpose power supplies utilize a voltage versus current characteristic output suitable for starting lamp loads or capacitive loads. The devices offer a DIN rail clip for mounting onto a rail or in a panel. The supplies are appropriate for small load applications in the building automation industry. Some models include

Gearmotors Perform at ½ Horsepower

August 26, 2008 6:54 am | Comments

Designed as Von Weise drop-in replacements, Bison Gear & Engineering’s VWDIR line of fractional horsepower gearmotors deliver from 1/30 to ½ horsepower in commercial and industrial light applications. The parallel shaft and right angle devices offer output torques from 12 in./lbs to 800 in./lbs in over 75 models. DC models

HCMOS Oscillators Offer Low Stabilities

August 26, 2008 5:50 am | Comments

Performing at 2.5 V, Fox Electronics’ F540 Series HCMOS oscillators exhibit stabilities of 15 ppm (F547), 10 ppm (F549) and 8 ppm (F54S) with phase noise of -140 dBc/Hz at 10 kHz offset and a jitter period of 3 ps rms. The 5 mm × 3.2 mm RoHS-compliant components presents an input current of 7 mA, output current of 4 mA and

Advertisement

Networking Switches Support Gigabit PoE

August 25, 2008 10:31 am | Comments

Targeting the small- and medium-sized business (SMB) market, ADTRAN’s NetVanta 1234 PoE, NetVanta 1238 PoE and NetVanta 1534 PoE networking switches support Gigabit PoE while offering LLDP/LLDP MED, cable diagnostics and

RF Connector System Operates Continuously at 250°C

August 25, 2008 9:15 am | Comments

Lasting for a lifespan of 25 years, ITT Interconnect Solutions’ SMA-Hi Temp RF connector system, consisting of a coaxial RF connector and 12 RF cable assemblies, uses a cable assembly with a silicone dioxide dielectric suitable for continuous operation at 250°C. The semi-rigid cable assemblies offer phase-matching to ±2° at 3 GHz and an option to be

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading