Product Releases
Subscribe to ECN Magazine Product Releases

VCO Performs to 4,442 MHz

December 1, 2008 7:58 am | Comments

Presenting a control voltage range from 0.1 V to ~16 V, Crystek’s CVCO55CC-4267-4442 VCO operates from 4,267 MHz to 4,442 MHz with an input voltage of 8 V. The 0.5” × 0.5” SMT oscillator exhibits a typical phase noise of -104 dBc/Hz at an offset of 10 KHz, typical output power of 5 dBm, and a maximum current consumption of 40 mA. The component

Multi-Loop Controller Fits on DIN Rail

December 1, 2008 6:42 am | Comments

Offering control-loop functionality in a DIN-rail mounted package, the EZ-ZONE RM configurable multi-loop temperature/process controller from Watlow can be used as a PID temperature/process controller, an over/under limit controller, or an integrated controller.

Cooling Engines Contain Matching Temperature Controllers

December 1, 2008 6:31 am | Comments

Targeting enclosures, Tellurex Corporation’s four new models of plug-and-play cooling engines include matching temperature controllers for thermal management applications. The lineup consists of two air-to-air engines for cooling/heating enclosure air, rated at 22 W and 45 W, and two cold-plate models for direct contact cooling, rated at 30 W and 60 W. The instruments


Enclosure Demonstrates High Airflow

December 1, 2008 6:04 am | Comments

Using a hot-swap switch, fan fail indicator, and handles, Elma Electronic’s 3U Microslim 19” rackmount enclosure utilizes cooling units in a push/pull airflow configuration exhibiting 42 ft³/min. of airflow each. The chassis offers 12 AdvancedMC (AMC), 2 MicroTCA

LED Light Tubes Exhibit High Brightness

December 1, 2008 5:21 am | Comments

Presenting input between 9.5 W and 24 W, GlacialLight’s LED-T8 LED light tubes demonstrate a brightness range from 480 lm at a flux of 60 lm/W to 2,560 lm at a flux of 80 lm/W. The products offer input voltages from 90 VAC to 240 VAC, power consumption from 9 W to 24 W, lengths from

Machine-Vision Camera Supports GigE Protocols

December 1, 2008 4:34 am | Comments

Comprised of five monochrome and four color models, GiantDragon Gigabit Ethernet (GigE) machine vision cameras from Toshiba Teli leverages the AIA GigE Vision open standard to deliver high-bandwidth streams of non-compressed data over CAT-5e and CAT-6 cables without specialized interface hardware or frame grabbers.


White OLED Illuminator Achieves Energy-Star Color Rating for Solid-State Lighting

November 29, 2008 7:04 am | Osram Opto Semiconductors | Comments

This achievement not only speeds us forward in the development of real-world solid-state lighting, it demonstrates that LED-based tech is not the only game in town.Delivering a light yield of over 60 lumens/watt, an organic light-emitting diode (OLED) white light emitter from BASF and Osram Opto Semiconductors also meets international Energy Star SSL Standard with regard to color requirements.


Module Allows Two Parallel-Running Operating Systems

November 26, 2008 8:26 am | Comments

Including Hypervisor Software 2.0 from Real-Time Systems, congatec AG’s conga-QA Qseven embedded PC module lets any two operating systems to be run in parallel independently from one another and with real-time capability. The component supports Intel hyper-threading and virtualization since it is based on the Intel Atom Z530 processor and the Intel System Controller Hub US15W. The individual CPUs, devices, memory, and I/O ports are directly


Designer Kit Contains ESD Protection Diodes

November 26, 2008 7:50 am | Comments

Working in high-speed I/O ports and systems requiring 30-kV contact discharge protection when tested to IEC61000 specifications, OnChip Devices’ OC-ESD-DK1 ESD protection diode designer kit comes with 12 different ESD protection diode products. The box consists of TVS devices, I/O port-specific products, 30-kV contact ESD protection diodes, and

Rotary Position Sensors Endure 10M Cycles

November 26, 2008 7:21 am | Murata Power Solutions Inc. | Comments

Enhancing the company’s SV01 Series, Murata Electronics’ SV3H Series SMT rotary position sensors achieve a rotational life of 10 million cycles. The component is appropriate for automotive applications, such as angular detection (steering wheel, seat position, gear-shift, and pedal positioning, as well as adaptive front lighting systems), selector switches

Switches Operate in Heavy-Duty Apps

November 26, 2008 6:31 am | Comments

Functioning in severe operating conditions, C&K Components’ DTC family of switches suit industrial controls, farm machinery, and off-road vehicles. The ESM and DSM single- and double-switch modules are protected from dust, water, oil, and solvents via silicon rubber caps and sealing to IP65 when mounted. The RS bi-directional and QS quadrant switches offer tactile feedback and positive snap-point action in front panels and

Plug-in Features CERT C Coding Standard

November 26, 2008 5:57 am | Comments

Plugging into TBvision, a module within the LDRA tool suite, the TBsecure plug-in from LDRA includes the Carnegie Mellon Software Engineering Institute (SEI) CERT C secure coding standard. Enabling developers to see how the source code performs against security vulnerabilities, fault-detection, and adherence

LCD Controller Works With DisplayMark Technology

November 26, 2008 5:52 am | Comments

Certified to work in conjunction with the DisplayMark technology for Digital Signage Systems, the SVH-1920 LCD Controller from Digital View supports high-resolution LCDs up to 1920 x 1200. The validation information is sent via an RS-232 protocol. The controller provides full screen buffering, and multi-panel support


500-W Converter Tackles Tough Environments

November 26, 2008 5:39 am | Comments

Designed for operation in extreme environments, Absopulse Electronics’ RWY 65 fully encapsulated 500-W DC/DC converter meets EN50155, EN55022 Class B, and EN50121-3-2 as well as IEC 61373 Cat 1 A & B and Cat 2 shock and vibration standards. The converter delivers standard outputs of 12, 24, 36, 48 or 110 VDC and can be operated from 48, 72, 96 or 110 Vdc supply voltages.

Adhesive Resists Wide Temperature Range

November 26, 2008 5:14 am | Comments

Curing at temperatures from 300°F to 350°F for 60 to 90 minutes, Master Bond’s EP13 epoxy adhesive offers a service operating temperature range from -60°F to 450°F. The compound requires no mixing, doesn’t contain solvents or diluents, is 100% reactive, and is said to have an unlimited working life at room temperature. The product readily obtains tensile shear


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.