Advertisement
Product Releases
Subscribe to ECN Magazine Product Releases
View Sample

FREE Email Newsletter

ECN Daily

Aluminum electrolytic capacitors offers features suited for LED lighting applications

April 1, 2014 9:38 am | Kemet Electronics Corporation | Comments

KEMET Corporation (Greenville, SC) introduced its next-generation aluminum electrolytic capacitors, featuring a new high performance axial series. Features include capacitances as high as 6,300 uF and voltage options of 25, 40 and 63 VDC....

TOPICS:

Explosion-proof work light outputs 12,500 lumens

March 31, 2014 2:03 pm | Larson Electronics Llc | Comments

Larson Electronics (Kemp, TX) announces the release of a 150 watt Class 2 Division 1 explosion proof LED light mounted on a non-sparking aluminum base. The EPLC2-PM-150LED-100 explosion proof LED light can illuminate up to 10,000 square feet of work space....

TOPICS:

Power shunt resistors provide precise sensing of high currents

March 31, 2014 1:06 pm | Koa Speer Electronics, Inc. | Comments

KOA Speer Electronics (Bradford, PA) has expanded their line of Power Shunt Resistors to include the PSI and PSE series, which address higher-current applications. The power ratings of the PSE (5 Watts) and PSI (3 Watts) allow these resistors to offer a smooth current flow....

TOPICS:
Advertisement

Intelligent LED controller offers I2C control and low standby power

March 31, 2014 12:58 pm | Marvell Semiconductor | Comments

Marvell (Santa Clara, CA) announced its new AC/DC LED driver Integrated Circuit (IC), the Marvell 88EM8189 featuring I2C compatible digital interface integration to connect with a networking microcontroller that runs a lighting control protocol, such as Zigbee, for smart wireless bulbs....

TOPICS:

Power amplifiers feature gain flatness from 0.50 dB to 1.0 dB

March 31, 2014 9:28 am | Comments

Pasternack Enterprises (Irvine, CA) introduces a new family of coaxial X band high-gain power amplifiers. These RF amplifiers are typically used as driver amplifiers or high-power output amplifiers in a wide variety of commercial, industrial, and military applications....

TOPICS:

COTS Air-flow through (AFT) rugged chassis is presented as industry’s first

March 28, 2014 3:35 pm | Curtiss-Wright Controls | Comments

Curtiss-Wright Corporation (Ashburn, VA) announced that its Defense Solutions division has introduced the Hybricon AFT16, which is said to be the industry’s first COTS OpenVPX Air Flow Through (AFT) Chassis. Leveraging the company’s AFT subsystem technology, the AFT16 supports

TOPICS:

Battery-free RFID sensor tag offers an extended temperature range from -30°C to 300°C degrees

March 27, 2014 4:15 pm | Comments

The Pyros-TGT2-DWB from Farsens S.L. (San Sebastián, Spain) is a battery-free RFID sensor tag capable of transmitting a unique identifier and the associated temperature measurement data to a commercial EPC C1G2 reader without the need of a battery on the sensor tag....

TOPICS:

Company introduces the industry's first automated SSL test system

March 27, 2014 3:55 pm | Comments

ASE Test (Greenville, NC) has developed the industry’s first automated test system that is specifically designed for quickly testing the electrical performance of LED drivers, LED arrays, and LED fixtures. Designated the ASE SSL 3.0 Test System, this flexible test system can be used for design....

TOPICS:
Advertisement

IP67 box enclosure seals out water and dust in extreme conditions

March 27, 2014 3:34 pm | Bud Industries, Inc. | Comments

Bud Industries (Cleveland, OH) has introduced its PIP Series IP67 box, which provides waterproof protection of electronics for approximately 10% less than competing enclosures. The new enclosure is made from a material that offers improved rigidity and tighter tolerances....

TOPICS:

Temperature-compensated crystal oscillators include accuracy to +/-.5ppm or better

March 26, 2014 4:52 pm | Precision Devices, Inc. | Comments

Precision Devices Inc. (Middleton, WI) has announced a major expansion of its TCXO (Temperature Compensated Crystal Oscillator) product line. These new products target applications where available circuit board space is at a premium or products that require excellent long term precision....

TOPICS:

Flexible light pipes rated to IP67 and NEMA 6P

March 26, 2014 4:13 pm | Comments

VCC (Poway, CA) provides design flexibility in new installations and retrofit/replacement applications with its FLX44 Series light pipe. Part of the Flexfire light pipe family, the FLX44 Series offers a 0.313” (7.95mm) panel opening threaded lens and IP67 / NEMA 6P ratings for harsh environments....

TOPICS:

Power IC model library features over 550 high fidelity and correlated simulation models

March 26, 2014 3:11 pm | Comments

EMA Design Automation announced version 4.1 of the AEi Systems’ Power IC Model Library for the Cadence PSpice simulator with over 550 high fidelity and correlated simulation models for power electronic designs. The Power IC Model Library includes model netlists....

TOPICS:

Sensor designed for transportation electronic power steering

March 26, 2014 2:44 pm | Tt Electronics | Comments

TT Electronics’ (Fullerton, CA) Sensing and Control division has expanded its series of sensors for electronic power steering (EPS) applications. The new Magnetorque Plus combines TT Electronics’ proven non-contacting torque sensor with a multi-turn position sensor in a single compact package....

TOPICS:
Advertisement

Surface-mountable device capable of handling up to 4 watts

March 26, 2014 2:30 pm | Stackpole Electronics, Inc. | Comments

The SM Series from Stackpole Electronics (Raleigh NC) offers a robust wirewound product in a surface-mountable device capable of handling up to 4 watts in a single part. Some applications require power handling of at least 2 watts, but design engineers have concerns about parts cracking....

TOPICS:

10 watt LED hazardous location light includes a day/night sensor and manual on/off switch

March 26, 2014 2:20 pm | Larson Electronics Llc | Comments

Larson Electronics (Kemp, TX) has released a solar-powered, explosion-proof LED light fixture with an optional strobe or steady burn configuration. This explosion-proof LED light and solar panel combination includes a day/night sensor, manual on/off switch, and a motion sensor....

TOPICS:

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading