Using a highly-integrated digital PWM controller, the 100-W BMR450 voltage regulation module (VRM) from Ericsson Power has a component count up to 50% smaller for a higher power density (120 A/in2) than a similar analog product. Further performance advantages are realized using the device’s embedded dynamic and adaptive controls.
Retrofitting and replacing common GE ET-16 sockets, DDP’s PowerLine PL16 Pilot 16-mm LED pilot light includes a solid-state, bayonet-based LED lamp and a Lexan lens that resists impact in industrial plants and utilities. The device uses a shunt resistor to reduce transient current and prevent a false positive indication by the LED. The product comes in 24-V, 48-V, or 120-V designs with thermoplastics, an operational lifetime of up to 100,000 hours, and
Coming with surface-mounted signal leads and through-hole ground tails, Samtec’s Mini HDMI (MHDMI) Series I/O receptacles are comprised of 19 contact positions with 5 signal pairs and 4 power lines. The mating cable plug (HPSTP Series) exhibits a micro-shielded twisted pair of 30 AWG cable, to prevent EMI interference from
Protecting sensitive datacom and telecom equipment from transient surge voltage damage from lighting strikes and equipment switching operations, Tyco Electronics’ R Series gas discharge tubes (GDTs) exhibit capacitance values as low as 0.5 pF. The SMT components offer a voltage range from 75 V to 600 V, sizes from 3 mm to 8 mm, 2- or 3-
Delivering power of 100 W (dual), 300 W, and 400 W, Chroma ATE’s 63600 Series DC electronic loads can draw a typical rated current of 80 A under a voltage of 0.4 V. The instruments simulate dynamic loading applications with programmable load levels, slew rates, duration, and conducting voltage. The devices exhibit an audio frequency
Requiring only eight pins and traces compared to as many as 26 in similar dual-channel devices, a pair of four-channel 12-bit analog-to-digital converters (ADCs) Analog Devices use up to 50 percent less printed-circuit-board surface area than other ADCs in their class. Requiring a single 1.8-Vin, the 250-MSPS (mega-sample-per-second) AD9239 incorporates a packetized output scheme, while the 210-MSPS AD9639 supports a JESD204-compliant output.
Providing an interface between USB and RS232-based devices, the USB-RS232-WE cable from Future Technology Devices has a small PCB encapsulated into the USB connector with an FTDI FT232R serial UART IC interface plus a RS232 level shifter. Supporting data transfer rates up to 1 Mbaud, the cable has LED indicators
Performing in portable and wireless applications, ON Semiconductor's NCP2991 Class AB audio amplifier offers a power supply rejection ratio (PSRR) of -103 dB. The 1.450-mm × 1.450-mm × 0.600-mm µBump-packaged component demonstrates selectable start-up time between 15 ms and 20 ms, current consumption of 20 nA, total harmonic
With a typical capacitance of 0.7 pF and a maximum leakage current as low as 0.085 µA, the VBUS053AZ-HAF ESD-protection array from Vishay guards USB-OTG ports against transient voltage signals. The device provides three lines of USB ESD protection at a 5.5-V working voltage, and one line of VBUS protection
Researchers working at the National Institute of Standards and Technology (NIST) have demonstrated for the first time the existence of a key magnetic—as opposed to electronic—property of specially built semiconductor devices. This discovery raises hopes for even smaller and faster gadgets that could result from magnetic data storage in a semiconductor material, which could then quickly process the data through built-in logic circuits controlled by electric fields.
Built to be at least IP65 compliant, Lamb Industries’ Anti-Vandal pushbutton switches can exhibit markings and bi-color illumination. The devices come in panel cutouts of 12 mm, 16 mm, 19 mm, 22 mm, and 25 mm diameter, and provide flat, domed, raised, concave, and guarded actuator options. The products offer nickel plating, gold
Available in from one- to five-chip arrays, OSRAM Opto Semiconductor’s OSTAR Headlamp LED with integrated shutter delivers from 125 lm at 700 mA (one chip) to 1,000 lm at 1 A (five chips) in automotive headlamp optical systems. The device demonstrates a power rating of 12 W and a street-legal color temperature of 6,000K, which is said to
Utilizing PCI Express 2.0 and 6-Gb SAS speeds, ATTO Technology’s ExpressSAS H608 and ExpressSAS H680 SAS/SATA host adapters supply a full-duplex connection to SAS/SATA storage of up to 8 GB/s. The ExpressSAS H608 offers 8 internal
Operating from -40°C to 85°C, Hittite Microwave’s HMC700LP4E fractional-N and HMC698LP5E and HMC699LP5E integer-N synthesizer ICs exhibit a phase noise of -108 dBc/Hz with FOM in the order of -227 dBc and -153 dBc/Hz at 10-kHz offset from a 100-MHz, 0-dBm signal, respectively. The 8-GHz HMC7000LP4E has a 16-bit fractional divider, 24-bit delta-sigma modulator, 14-bit reference path divide, charge pump, and
Exhibiting a temperature accuracy of ±0.15°C, Data Translation’s DT9871U (for USB) and DT8871U (for Ethernet) TEMPpoint temperature measurement instruments demonstrate noise of <±1.5 uV. The tools use up to 48 dedicated 24-bit A/D converters, up to 48 dedicated CJC circuits, 16 (8/8) and opto-isolated digital input and output lines. The instruments offer 1,000-V channel-to-channel galvanic isolation, constant throughput across