Product Releases
Diode series serves land mobile radio, wireless infrastructure, and test instrument applications
May 28, 2013 10:13 am | M/A-Com Technology Solutions, Inc. | CommentsM/A-COM Technology Solutions extended its strong industry position in diodes with a new family of broadband Shunt PIN Diodes for high-power switching applications. The MACOM Shunt PIN Diode series is designed for customers who need a versatile, low cost, ultra-small Shunt PIN diode element for land mobile radio, wireless infrastructure and test instrument applications.
Innovative chip provides ultra-low voltage characteristics
May 28, 2013 9:56 am | Goepel Electronics Llc | CommentsGOEPEL electronic introduces CION LX, a new generation of JTAG transceiver ICs. The innovative chip provides ultra-low voltage characteristics, offering a tester-per-pin architecture based on diverse Boundary Scan standards such as IEEE 1149.1, IEEE 1149.6 and IEEE 1149.8.1, in combination with additional digital and analogue test instruments.
Integrated power modules include high voltage ratings
May 28, 2013 9:33 am | International Rectifier | CommentsInternational Rectifier announced the expansion of its PowIRaudio family with the introduction of the single channel IR4321M and dual channel IR4322M integrated power modules. The 60V IR4321M and IR4322M complement the existing product offering and expand the power capability of low load-impedance Class D audio systems....
PCI Express board provides two optically isolated serial ports
May 23, 2013 3:40 pm | Sealevel Systems, Inc. | CommentsSealevel’s 7203e PCI Express serial interface provides two optically isolated serial ports, each individually configurable for RS-232, RS-422, or RS-485. Each serial port utilizes a high-performance UART with 128-byte Tx/Rx FIFOs that enables data rates to 460.8K bps for reliable high-speed communications in data intensive applications.
Over-the-air test system enables industry’s first 802.11n WLAN over-the-air measurements
May 23, 2013 3:28 pm | Rohde & Schwarz | CommentsCETECOM has selected Rohde & Schwarz (R&S) to enhance their over-the-air (OTA) testing capabilities with a new test system that includes LTE multiple-input, multiple-output (MIMO) and 802.11n functionality. The TS8991 test system can perform OTA measurements for LTE MIMO in addition to all cellular 2G, 3G, and 4G technology standards.
Amplifier operates from 10 kHz to 400 MHz and has a rated power of 260 W
May 23, 2013 12:36 pm | Teseq, Inc. | CommentsTeseq expanded its broadband amplifier line to include a Class A linear and low distortion model that operates from 10 kHz to 400 MHz with a rated power level of 260 W. For use in commercial or in-house EMC test laboratories, the CBA 400M-260 is appropriate for automotive, military and aerospace BCI
Pressure sensors ensure optimal operations of safety trailers used on remote sites
May 23, 2013 12:31 pm | CommentsAmerican Sensor Technologies (AST) pressure sensors are serving as components in a remote monitoring system that ensures optimal operations of safety trailers used on remote sites as emergency first aid stations. Mining, construction, oil fields and other industrial sites are often located miles away from medical facilities.
Data acquisition module ideal for high-power applications
May 23, 2013 12:17 pm | CommentsICP DAS USA has introduced M-7069D, a Modbus RTU based data acquisition module with 8 LED indicators that can be used to monitor the relay output status. Options are provided that allow power-on and safe digital output values to be configured. 4 kV ESD, 4 kV EFT and 3 kV surge protection are provided to enhance noise protection capabilities in industrial environments.
Unipolar and bipolar high-voltage amplifiers are available to 20 kV
May 23, 2013 12:05 pm | UltraVolt, Inc. | CommentsUltraVolt expanded its line of precision high-voltage amplifiers - the HVA Series - capable of operating in DC, reversible, and amplifier modes. The new line of precision high-voltage amplifiers, the 10 HVA-20 HVA Series, is available with unipolar or bipolar output at 0 to 10 kV, 15 kV and 20 kV. Together with
Software allows for easy setup of embedded motion controllers
May 23, 2013 11:13 am | Performance Motion Devices | CommentsPerformance Motion Devices announces a major new release of its Pro-Motion software for Windows-based environments. Pro-Motion 5.0 adds a number of key capabilities including an upgraded axis setup wizard, support for SPI-based motion amplifiers including PMD's ATLAS digital amplifier products, and support for all-in-one embedded motion cards and systems.
End-to-end test solution analyzes IP-based applications
May 23, 2013 11:05 am | Rohde & Schwarz | CommentsRohde & Schwarz has developed the world's first integrated end-to-end test solution that examines the impact applications have on smartphones and the network using IP and protocol statistical analysis. Equipped with the new R&S CMW-KM051 option, the R&S CMW500 wideband radio communication tester can comprehensively analyze and test IP-based applications....
DC-DC converters feature a typical efficiency of 95.5%
May 23, 2013 10:53 am | Murata Power Solutions Inc. | CommentsMurata announced the UDQ series of isolated digitally controlled DC-DC converters developed by Murata Power Solutions. Incorporating a 32-bit ARM7 processor, the 420 Watt regulated UDQ2204/001 model is the first in a series of DC-DC converters from Murata Power Solutions to include a PMBus compatible digital interface.
MOVs target incoming power distribution panels
May 23, 2013 10:36 am | CommentsStackpole’s ZOV Series of metal oxide varistors is a series of epoxy coated square varistors with sizes from 23 mm to 60 mm. These high-energy varistors come in a single disc, double, triple and quadruple disc versions with pulse current capabilities of up to 80 kA. This series offers energy handling up to
SPI digital potentiometers operate at 10, 12, 18, 24, 36 volts
May 22, 2013 4:26 pm | Microchip Technology Inc. | CommentsMicrochip Technology Inc. announced two new volatile, SPI digital potentiometers (digipots)—the MCP41HV31 and MCP41HV51 (MCP41HVXX)—its first to operate at 10, 12, 18, 24 and particularly 36 volts, for systems requiring wide signal swing or high power-supply voltages.
Power MOSFET series offers on-resistance down to 30 mΩ
May 22, 2013 3:53 pm | Vishay Intertechnology | CommentsVishay Intertechnology added additional 650 V power MOSFETs to its E Series family of devices. These 22 new devices in eight different packages offer an extended on-resistance range from 30 mΩ to 600 mΩ at 10 V and broaden the series' maximum current ratings from 6 A to 105 A.
